EN 60534-1:2005
Current
Current
The latest, up-to-date edition.
Industrial-process control valves - Part 1: Control valve terminology and general considerations
Published date
22-02-2005
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 Component terminology
4 Functional terminology
5 Testing requirements
5.1 Production testing
5.2 Type testing
6 Prediction methods
6.1 Valve sizing
6.2 Noise levels
Bibliography
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
applies to all types of industrial-process control valves (hereinafter referred to as control valves). This part establishes a partial basic terminology list and provides guidance on the use of all other parts of EN 60534
| Committee |
CLC/TC 65X
|
| DevelopmentNote |
Supersedes UNE EN 60534-1. (02/2008)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 60534-1:1999 | Identical |
| SN EN 60534-1 : 1993 | Identical |
| IEC 60534-1:2005 | Identical |
| DIN EN 60534-1:2005-07 | Identical |
| BS EN 60534-1:2005 | Identical |
| CEI EN 60534-1 : 2005 | Identical |
| PN EN 60534-1 : 2005 | Identical |
| NEN EN IEC 60534-1 : 2005 | Identical |
| NF EN 60534-1 : 2005 | Identical |
| I.S. EN 60534-1:2005 | Identical |
| NBN EN 60534-1 : 2006 | Identical |
| OVE/ONORM EN 60534-1 : 2005 | Identical |
| UNE-EN 60534-1:2005 | Identical |
| NEN 10534-1 : 1993 | Identical |
| PNE-prEN 60534-1 | Identical |
| BS EN 61987-23:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of actuators for electronic data exchange |
| BS EN 61514-2:2013 | Industrial process control systems Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly |
| CEI EN 60534-8-4 : 2016 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW |
| I.S. EN 60534-2-4:2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
| 06/30157192 DC : 0 | BS EN 736-3 - VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
| BS EN 60534-7:2010 | Industrial-process control valves Control valve data sheet |
| CEI EN 60534-9 : 2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
| BS EN 60534-8-4:2015 | Industrial-process control valves Noise considerations. Prediction of noise generated by hydrodynamic flow |
| CEI EN 60534-7 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 7: CONTROL VALVE DATA SHEET |
| 16/30334287 DC : 0 | BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
| I.S. EN 60534-8-2:2011 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES (IEC 60534-8-2:2011 (EQV)) |
| DIN EN 334:2016-05 (Draft) | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| I.S. EN 14382:2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
| BS EN 14382 : 2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| DIN EN 736-3:2008-04 | Valves - Terminology - Part 3: Definition of terms |
| EN 60534-3-1:2000/corrigendum:2000 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
| EN 60534-2-5:2003 | Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery |
| EN 61987-23:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange |
| EN 60534-8-3:2011 | Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method |
| EN 1349:2009 | Industrial process control valves |
| EN 61987-21:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures |
| EN 61514-2:2013 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013) |
| BS EN 1349:2009 | Industrial process control valves |
| BS EN 60534-2-4:2009 | Industrial-process control valves Flow capacity. Inherent flow characteristics and rangeability |
| PREN 14382 : DRAFT 2016 | GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
| 06/30148043 DC : 0 | EN 88-2 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR |
| BS EN 60534-2-3:2016 | Industrial-process control valves Flow capacity. Test procedures |
| I.S. EN 61987-22:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 22: LISTS OF PROPERTIES (LOPS) OF VALVE BODY ASSEMBLIES FOR ELECTRONIC DATA EXCHANGE |
| 04/30117386 DC : DRAFT JUL 2004 | EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| CEI EN 60534-2-5 : 2004 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-5: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW THROUGH MULTISTAGE CONTROL VALVES WITH INTERSTAGE RECOVERY |
| CEI EN 60534-8-2 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES |
| I.S. EN 61987-23:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 23: LISTS OF PROPERTIES (LOPS) OF ACTUATORS FOR ELECTRONIC DATA EXCHANGE |
| I.S. EN 60534-9:2007 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
| ONORM EN 334 : JUN 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 60534-8-2:2011 | Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by hydrodynamic flow through control valves |
| I.S. EN 60534-2-1:2011-2015-10 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS |
| DIN EN 14382:2016-05 (Draft) | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 334 : 2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| I.S. EN 736-3:2008 | VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
| I.S. EN 1349:2009 | INDUSTRIAL PROCESS CONTROL VALVES |
| UNI EN 1349 : 2010 | INDUSTRIAL PROCESS CONTROL VALVES |
| I.S. EN 88-2:2007 | PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR |
| VDI/VDE 3844:2014-01 | Industrial process control valves - Actuators for control valves |
| VDI/VDE 2176:2007-09 | Fluidic characteristic quantities of vanes and their determination |
| VDI 2073 Blatt 2:2012-05 | Hydraulic systems in building services - Hydraulic balancing |
| CEI EN 60534-8-3 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-3: NOISE CONSIDERATIONS - CONTROL VALVE AERODYNAMIC NOISE PREDICTION METHOD |
| DIN EN 60534-2-4:2009-11 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
| BS EN 61987-21:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues List of Properties (LOP) of automated valves for electronic data exchange. Generic structures |
| BS EN 60534-8-1:2005 | Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves |
| I.S. EN 61514-2:2013 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV)) |
| I.S. EN 60534-8-1:2005 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
| BS EN 60534-5:2004 | Industrial-process control valves Marking |
| CEI EN 60534-2-4 : 2010 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
| BS EN 60534-8-3:2011 | Industrial-process control valves Noise considerations. Control valve aerodynamic noise prediction method |
| CEI EN 60534-8-1 : 2006 | VANNES DE REGULATION DES PROCESSUS INDUSTRIELS - PARTIE 8-1: CONSIDERATIONS SUR LE BRUIT - MESURE EN LABORATOIRE DU BRUIT CREE PAR UN DEBIT AERODYNAMIQUE A TRAVERS UNE VANNE DE REGULATION |
| I.S. EN 60534-3-1:2000 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
| EEMUA 182 : 2004 | SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK |
| UNI EN 14382 : 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| UNI EN 736-3 : 2008 | VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
| BS EN 61987-22:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of valve body assemblies for electronic data exchange |
| BS EN 60534-3-3:1998 | Industrial-process control valves Dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
| BS EN 60534-2-5:2003 | Industrial-process control valves. Flow capacity Sizing equations for fluid flow through multistage control valves with interstage recovery |
| BS EN 60534-2-1:2011 | Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures Power metering and monitoring devices (PMD) |
| 08/30179182 DC : DRAFT MAY 2008 | BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
| I.S. EN 334:2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| I.S. EN 61987-21:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 21: LIST OF PROPERTIES (LOP) OF AUTOMATED VALVES FOR ELECTRONIC DATA EXCHANGE - GENERIC STRUCTURES |
| I.S. EN 60534-7:2010 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 7: CONTROL VALVE DATA SHEET |
| I.S. EN 60534-5:2004 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 5: MARKING |
| 16/30334290 DC : 0 | BS EN 14382 - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
| DIN EN 88-2:2008-03 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
| EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| DIN EN 60534-2-1:2012-01 | Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:2011); German version EN 60534-2-1:2011 |
| I.S. EN 60534-8-4:2015 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW |
| CEI EN 60534-3-1 : 2001 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
| BS EN 60534-9:2007 | Industrial-process control valves Test procedure for response measurements from step inputs |
| I.S. EN 60534-2-3:2016 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY TEST PROCEDURES |
| UNI EN 334 : 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| I.S. EN 60534-2-5:2003 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-5: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW THROUGH MULTISTAGE CONTROL VALVES WITH INTERSTAGE RECOVERY |
| BS EN 60534-3-1:2000, IEC 60534-3-1:2000 | INDUSTRIAL-PROCESS CONTROL VALVES - DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
| EN 60534-2-1:2011/AC:2015 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS (IEC 60534-2-1:2011) |
| BS EN 736-3:2008 | Valves. Terminology Definition of terms |
| EN 61987-22:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange |
| EN 60534-9 : 2007 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
| EN 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
| EN 60534-2-3:2016 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
| EN 60534-2-4 : 2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
| EN 60534-8-4:2015 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow |
| EN 60534-5:2004 | Industrial-process control valves - Part 5: Marking |
| EN 60534-7:2010 | Industrial-process control valves - Part 7: Control valve data sheet |
| EN 60534-8-2:2011 | Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN 61333:1998 | Marking on U and E ferrite cores |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.