EN 60534-7:2010
Current
The latest, up-to-date edition.
Industrial-process control valves - Part 7: Control valve data sheet
10-12-2010
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Application
5 General requirements sheet
6 Preparation of data sheet
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
IEC 60534-7:2010 provides a list of requirements that are necessary for the procurement of the majority of control valves for process systems. The list is arranged to assist the specification writer with a standardized presentation of data and also to be a basis for use with data processing facilities. A detailed set of instructions is included in order to ensure that the abbreviated terms are fully understood and that consistent data entries are always made. This second edition cancels and replaces the first edition published in 1989. This edition constitutes a technical revision The main changes with respect to the previous edition are: - the standard has been updated to reflect digital electronic accessories and fieldbus protocols; - to aid clarification, the explanation of terms and definitions contains the same subheading as the information required in the control valve data sheet; - the column numbering system has been replaced with descriptive title headings.
| Committee |
CLC/TC 65X
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| PN EN 60534-7 : 2011 | Identical |
| NBN EN 60534-7 : 2011 | Identical |
| I.S. EN 60534-7:2010 | Identical |
| NF EN 60534-7 : 2012 | Identical |
| BS EN 60534-7:2010 | Identical |
| NEN EN IEC 60534-7 : 2010 | Identical |
| CEI EN 60534-7 : 2012 | Identical |
| UNE-EN 60534-7:2010 | Identical |
| IEC 60534-7:2010 | Identical |
| DIN EN 60534-7:2011-08 | Identical |
| PNE-FprEN 60534-7 | Identical |
| EN 61987-23:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange |
| EN 61987-24-1:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-1: Lists of Properties (LOPs) of positioners and I/P converters for electronic data exchange |
| EN 61987-21:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures |
| EN 61987-22:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange |
| I.S. EN 61987-23:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 23: LISTS OF PROPERTIES (LOPS) OF ACTUATORS FOR ELECTRONIC DATA EXCHANGE |
| VDI/VDE 3844:2014-01 | Industrial process control valves - Actuators for control valves |
| BS EN 61987-21:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues List of Properties (LOP) of automated valves for electronic data exchange. Generic structures |
| BS EN 61987-23:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of actuators for electronic data exchange |
| I.S. EN 61987-24-1:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-1: LISTS OF PROPERTIES (LOPS) OF POSITIONERS AND I/P CONVERTERS FOR ELECTRONIC DATA EXCHANGE |
| BS EN 61987-24-1:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of positioners and I/P converters for electronic data exchange |
| BS EN 61987-22:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of valve body assemblies for electronic data exchange |
| I.S. EN 61987-21:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 21: LIST OF PROPERTIES (LOP) OF AUTOMATED VALVES FOR ELECTRONIC DATA EXCHANGE - GENERIC STRUCTURES |
| I.S. EN 61987-22:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 22: LISTS OF PROPERTIES (LOPS) OF VALVE BODY ASSEMBLIES FOR ELECTRONIC DATA EXCHANGE |
| EN 60534-8-3:2011 | Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method |
| EN 60534-8-4:2015 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow |
| EN 60534-1:2005 | Industrial-process control valves - Part 1: Control valve terminology and general considerations |
| IEC 60534-3-3:1998 | Industrial-process control valves - Part 3-3: Dimensions End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
| EN 60534-2-4 : 2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
| IEC 60534-3-1:2000 | Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves |
| EN 60534-2-5:2003 | Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery |
| IEC 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
| IEC 60534-2-5:2003 | Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery |
| EN 60534-4 : 2006 | Industrial-process control valves - Part 4: Inspection and routine testing |
| EN 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 60534-2-1:2011/AC:2015 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS (IEC 60534-2-1:2011) |
| IEC 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
| EN 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
| IEC 60534-4:2006 | Industrial-process control valves - Part 4: Inspection and routine testing |
| IEC 60534-8-4:2015 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| EN 60534-5:2004 | Industrial-process control valves - Part 5: Marking |
| EN 60534-3-1:2000/corrigendum:2000 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
| IEC 60534-2-1:2011 | Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions |
| EN 60534-3-3:1998 | Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
| IEC 60534-1:2005 | Industrial-process control valves - Part 1: Control valve terminology and general considerations |
| IEC 60534-5:2004 | Industrial-process control valves - Part 5: Marking |
| IEC 60534-8-3:2010 | Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method |
| IEC 60534-2-4:2009 | Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.