EN 60687:1992/corrigendum:1993

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

ALTERNATING CURRENT STATIC WATT HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2S AND 0.5S)

Available format(s):

Superseded date: 01-03-2003

Language(s):

Published date: 12-01-2013

Publisher: European Committee for Standards - Electrical

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Cooperating organizations
National foreword
Foreword
1. Scope
2. Normative references
3. Definitions
3.1 General definitions
3.2 Definitions related to the functional elements
3.3 Definitions of mechanical elements
3.4 Definitions of insulations
3.5 Definitions of meter quantities
3.6 Definitions of influence quantities
3.7 Definition of tests
4. Requirements
4.1 Standard electrical values
4.2 Mechanical requirements
4.3 Climatic conditions
4.4 Electrical requirements
4.5 Electromagnetic compatibility (EMC)
4.6 Accuracy requirements
5. Tests and test conditions
5.1 General testing procedures
5.2 Tests of mechanical requirements
5.3 Tests of climatic influences
5.4 Tests of electrical requirements
5.5 Tests for electromagnetic compatibility (EMC)
5.6 Tests of accuracy requirements
Annexes
A. Relationship between ambient air temperature and
     relative humidity
B. Voltage wave-form for the tests of the effect of
     voltage dips and short interruptions
C. Electromagnet for testing the influence of
     externally-produced magnetic fields
D. Test schedule
ZA. Special national conditions
ZB. Other international publications quoted in this
     standard with the references of the relevant
     European publications
Tables
1. Standard reference voltages
2. Clearances and creepage distances for the terminal
     block
3. Voltage marking
4. Temperature range
5. Relative humidity
6. Power consumption including the power supply
7. Voltage range
8. Variations due to self-heating
9. Percentage error limits (single-phase meters and
     polyphase meters with balanced loads)
10. Percentage error limits (polyphase meters carrying
     a single-phase load, but with balanced polyphase
     voltages applied to voltage circuits)
11. Influence quantities
12. Temperature coefficient
13. AC voltage tests
14. Voltage and current balance
15. Reference conditions
16. Interpretation of test results
National annex NA (informative) Committees responsible
National annex NB (informative) Cross-references

Abstract - (Show below) - (Hide below)

Deals with the measurement (by static watt hour meters of accuracy classes 0,2 S and 0,5 S) of alternating current electrical active energy of a frequency between 45Hz to 65 Hz and to their type tests only. Applies transformer operated static meters for indoor application consisting of one or more measuring elements and registers enclosed together in the same case. Also applies to test outputs, operation indicators and meters that measure energy in both directions. Does not apply to: portable meters and meters for outdoor use; watt hour meters where the voltage across the connection terminals exceeds 600 V (line to line voltage for meters for polyphase systems); data interface to the register of the meter; reference meters.

General Product Information - (Show below) - (Hide below)

Committee	TC 13
Document Type	Standard
ISBN
Pages
Published
Publisher	European Committee for Standards - Electrical
Status	Superseded
Superseded By	EN 62053-22:2003

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
I.S. EN 60687:1993	Identical
UNE-EN 60687:1994	Identical
BS EN 60687:1993	Identical
NBN EN 60687 : 1993	Identical
CEI EN 60687 : 2ED 1997	Identical
SN EN 60687 : 1992	Identical
NEN 10687 : 1993	Identical
VDE 0418-8 : 1994	Identical
NF EN 60687 : 1993	Identical
IEC 60687:1992	Identical
DIN EN 60687 : 1994	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS EN 61036:1997	Alternating current static watt-hour meters for active energy (classes 1 and 2)
I.S. EN 62053-61:1999	ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 61: POWER CONSUMPTION AND VOLTAGE REQUIREMENTS
EN 62053-31 : 1998	Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only)
EN 62053-61:1998	Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements
95/214875 DC : 0	PREN 50222 - STANDARD FOR THE EVALUATION OF MEASUREMENT RESULTS TAKING MEASUREMENT UNCERTAINTY INTO ACCOUNT
BS EN 62053-31:1999	Electricity metering equipment (a.c.). Particular requirements Pulse output devices for electromechanical and electronic meters (two wires only)
CEI EN 62053-31 : 1999	ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 31: PULSE OUTPUT DEVICES FOR ELECTROMECHANICAL AND ELECTRONIC METERS (TWO WIRES ONLY)
I.S. EN 61036:1997	ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
CEI EN 62053-61 : 1999	ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 61: POWER CONSUMPTION AND VOLTAGE REQUIREMENTS
BS EN 62053-61:1999	Electricity metering equipment (a.c.). Particular requirements Power consumption and voltage requirements
EN 61036:1996/A1:2000	ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60038:2009	IEC standard voltages
IEC 60695-2-1:1991	Fire hazard testing - Part 2: Test methods - Section 1: Glow-wire test and guidance
IEC 60521:1988	Class 0.5, 1 and 2 alternating-current watthour meters
IEC 60068-2-27:2008	Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC TR 60736:1982	Testing equipment for electrical energy meters
ISO 75:1987	Plastics and ebonite Determination of temperature of deflection under load
IEC 60801-4:1988	Electromagnetic compatibility for industrial-process measurement and control equipment - Part 4: Electrical fast transient/burst requirements
IEC 60068-2-11:1981	Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
IEC 60817:1984	Spring-operated impact-test apparatus and its calibration
IEC 60085:2007	Electrical insulation - Thermal evaluation and designation
IEC 60801-1:1984	Electromagnetic compatibility for industrial-process measurement and control equipment. Part 1: General introduction
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC 60068-2-2:2007	Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60801-3:1984	Electromagnetic compatibility for industrial-process measurement and control equipment - Part 3: Radiated electromagnetic field requirements
IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV	Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
IEC 60417C:1977	Third supplement.
IEC 60359:2001	Electrical and electronic measurement equipment - Expression of performance
IEC 60186:1987	Voltage transformers
IEC 60068-2-1:2007	Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60387:1992	Symbols for alternating-current electricity meters
IEC 61036:1996+AMD1:2000 CSV	Alternating current static watt-hour meters for active energy (classes 1 and 2)
IEC 60801-2:1991	Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements
IEC 60068-2-30:2005	Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart