EN 60793-1-33:2017

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Overview of test methods
5 Reference test methods
6 Apparatus
7 Sampling and specimens
8 Procedure
9 Calculations
10 Results
11 Specification information
Annex A (normative) - Dynamic n value, n[d],
        by axial tension
Annex B (normative) - Dynamic n value, n[d],
        by two-point bending
Annex C (normative) - Static n value, n[s],
        by axial tension
Annex D (normative) - Static n value, n[s],
        by two-point bending
Annex E (normative) - Static n value, n[s],
        by uniform bending
Annex F (informative) - Considerations for dynamic
        stress corrosion susceptibility parameter
        calculations
Annex G (informative) - Considerations for static
        stress corrosion susceptibility parameter
        calculations
Annex H (informative) - Considerations on stress
        corrosion susceptibility parameter test methods
Bibliography

IEC 60793-1-33:2017 contains descriptions of the five main test methods for the determination of stress corrosion susceptibility parameters. The object of this document is to establish uniform requirements for the mechanical characteristic of stress corrosion susceptibility for silica-based fibres. Dynamic fatigue and static fatigue tests are used to determine the (dynamic) n_d value and (static) n_s value of stress corrosion susceptibility parameters. Currently, only the n_d-value is assessed against specification. Measured values greater than 18 per this procedure reflect the n_d-value of silica, which is approximately 20. Higher values will not translate to demonstrable enhanced fatigue resistance. Silica fibre mechanical tests determine the fracture stress and fatigue properties under conditions that model the practical applications as closely as possible. The following test methods are used for determining stress corrosion susceptibility:A: Dynamic n_d value by axial tension;B: Dynamic n_d value by two-point bending;C: Static n_s value by axial tension;D: Static n_s value by two-point bending;E: Static n_s value by uniform bending.These methods are appropriate for category A1, A2 and A3 multimode, class B single-mode fibres and class C intraconnecting single-mode fibres. These tests provide values of the stress corrosion parameter, n, that can be used for reliability calculations according to IEC TR 62048. Information common to all methods is contained in Clauses 1 to 10, and information pertaining to each individual test method appears in Annexes A, B, C, D, and E. Annexes F and G offer considerations for dynamic and static stress corrosion susceptibility parameter calculations, respectively; Annex H offers considerations on the different stress corrosion susceptibility parameter test methods. This second edition cancels and replaces the first edition published in 2001. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: removal of RTM; changes to scope.Keywords: stress corrosion, silica fibre mechanical tests