
EN 60794-4-10:2014
Current
The latest, up-to-date edition.

Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines
19-12-2014
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Optical fibre
5 Cable element
6 Cable construction
7 Cable design characteristics
8 Cable tests
9 Quality assurance
Annex A (informative) - Packaging and marking
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
IEC 60794-4-10:2014 which is a family specification, covers cable construction, test methods and optical, mechanical, environmental and electrical performance requirements for OPGW (optical ground wire) which is used for the protection of electrical power lines against atmospheric discharges or short-circuits and, at the same time, as a high bandwidth transport media for communications-and-control optical signals. The corresponding environmental declaration may be built according to IEC TR 62839-1. This second edition cancels and replaces the first edition published in 2006 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:- galloping test (9.7) has been added to the type tests list;- update of definitions clause;- maximum installation tension (MIT) defined and used in the sheave test description;- definition of characterization of OPGW's mechanical behaviour in order to provide information useful for electrical power transmission lines designers;- improved definition of lightning test parameters and conditions to improve reproducibility among different laboratories.Keywords: OPGW (optical ground wire), protection of electrical power lines, atmospheric discharges
Committee |
CLC/TC 86A
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Current
|
Standards | Relationship |
UNE-EN 60794-4-10:2012 | Identical |
DIN EN 60794-4-10 : 2015 | Identical |
BS EN 60794-4-10:2014 | Identical |
CEI EN 60794-4-10 : 2015 | Identical |
VDE 0888-111-4 : 2015 | Identical |
PN EN 60794-4-10 : 2015 | Identical |
IEC 60794-4-10:2014 | Identical |
NBN EN 60794-4-10 : 2015 | Identical |
NEN EN IEC 60794-4-10 : 2015 | Identical |
NF EN 60794-4-10 : 2007 | Identical |
I.S. EN 60794-4-10:2014 | Identical |
UNE-EN 60794-4-10:2014 | Identical |
SN EN 60794-4-10:2014 | Identical |
NF EN 60794-4-10:2014 | Identical |
UNE-EN 60794-4-10:2021 | Identical |
UNE-EN 50341-1:2017 | Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications |
BS EN 50341-1:2012 | Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications |
I.S. EN 50341-1:2012 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
EN 50341-1:2012 | Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications |
CEI EN 50341-1 : 2013 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
12/30260570 DC : 0 | BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
PREN 50341-1 : DRAFT 2012 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
EN 60794-1-23:2012 | OPTICAL FIBRE CABLES - PART 1-23: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - CABLE ELEMENT TEST METHODS (IEC 60794-1-23:2012) |
IEC 61395:1998 | Overhead electrical conductors - Creep test procedures for stranded conductors |
EN 61394:2011 | Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors |
EN 60793-1-44:2011 | OPTICAL FIBRES - PART 1-44: MEASUREMENT METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH |
IEC 60793-1-44:2011 | Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength |
IEC 61394:2011 | Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors |
EN 60793-2-50:2016 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
IEC 60304:1982 | Standard colours for insulation for low-frequency cables and wires |
EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
IEC TR 62839-1:2014 | Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules |
IEC 60794-4:2003 | Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines |
IEC 60888:1987 | Zinc-coated steel wires for stranded conductors |
IEC 60794-1-1:2015 | Optical fibre cables - Part 1-1: Generic specification - General |
EN 60793-1-40:2003 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
IEC 60104:1987 | Aluminium-magnesium-silicon alloy wire for overhead line conductors |
IEC 60794-1-24:2014 | Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods |
EN 60889:1997 | Hard-drawn aluminium wire for overhead line conductors |
EN 60794-1-24:2014 | Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods |
IEC 60889:1987 | Hard-drawn aluminium wire for overhead line conductors |
IEC 60793-1-40:2001 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
IEC 60794-1-22:2017 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
ISO 9001:2015 | Quality management systems — Requirements |
IEC 60793-2-50:2015 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
HD 402 : 200S2 | STANDARD COLOURS FOR INSULATION FOR LOW-FREQUENCY CABLES AND WIRES |
EN 60794-1-20:2014 | Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions |
EN 60794-4:2003 | Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines |
IEC 61232:1993 | Aluminium-clad steel wires for electrical purposes |
EN 61395:1998 | Overhead electrical conductors - Creep test procedures for stranded conductors |
EN 61232:1995/A11:2000 | ALUMINIUM CLAD STEEL WIRES FOR ELECTRICAL PURPOSES |
IEC 60794-1-23:2012 | Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods |
IEC 60794-1-21:2015 | Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods |
IEC 60793-1-48:2017 | Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.