• EN 60903 : 2003 COR 2005

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    LIVE WORKING - GLOVES OF INSULATING MATERIAL

    Available format(s): 

    Superseded date:  30-08-2019

    Language(s): 

    Published date:  13-01-2013

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    INTRODUCTION
    1 Scope
    2 Normative references
    3 Definitions
    4 Classification
    5 General requirements
       5.1 Physical requirements
            5.1.1 Composition
            5.1.2 Shape
            5.1.3 Dimensions
            5.1.4 Thickness
            5.1.5 Workmanship and finish
       5.2 Mechanical requirements
            5.2.1 Tensile strength and elongation at break
            5.2.2 Tension set
       5.3 Electrical requirements
       5.4 Ageing requirements
       5.5 Thermal requirements
            5.5.1 Low temperature resistance
            5.5.2 Flame retardancy
       5.6 Gloves with special properties
            5.6.1 Acid resistance
            5.6.2 Oil resistance
            5.6.3 Ozone resistance
            5.6.4 Acid, oil and ozone resistance
            5.6.5 Extremely low temperature resistance
       5.7 Marking
       5.8 Packaging
    6 Specific mechanical requirements
       6.1 Insulating gloves - Resistance to mechanical puncture
       6.2 Composite gloves
            6.2.1 Resistance to mechanical puncture
            6.2.2 Abrasion resistance
            6.2.3 Cutting resistance
            6.2.4 Tear resistance
    7 Electrical requirements for long composite gloves
    8 General testing
       8.1 General
       8.2 Visual inspection and measurements
            8.2.1 Shape
            8.2.2 Dimensions
            8.2.3 Thickness
            8.2.4 Workmanship and finish
       8.3 Mechanical tests
            8.3.1 Tensile strength and elongation at break
            8.3.2 Resistance to mechanical puncture
            8.3.3 Tension set
       8.4 Dielectric tests
            8.4.1 General
            8.4.2 AC test procedure
            8.4.3 DC test procedure
       8.5 Ageing test
       8.6 Thermal tests
            8.6.1 Low temperature test
            8.6.2 Flame retardancy test
       8.7 Tests on gloves with special properties
            8.7.1 Category A - Acid resistance
            8.7.2 Category H - Oil resistance
            8.7.3 Category Z - Ozone resistance
            8.7.4 Category C - Extremely low temperature resistance
       8.8 Marking
       8.9 Packaging
    9 Specific mechanical testing
       9.1 Abrasion resistance
       9.2 Cutting resistance
            9.2.1 Test on reference test piece
            9.2.2 Test on glove test piece
       9.3 Tear resistance
    10 Leakage current test
       10.1 General test conditions
       10.2 Test arrangement
       10.3 Test procedure
    11 Quality assurance plan and acceptance tests
       11.1 General
       11.2 Categories of tests
       11.3 Sampling procedure
       11.4 Acceptance tests
    Annex A (normative) List and classification of tests
    Annex B (normative) Liquid for tests on gloves of category
                           H - Oil resistance
    Annex C (normative) Sampling procedure
    Annex D (informative) Guidelines for the selection of the
                           class of glove in relation to nominal
                           voltage of a system
    Annex E (informative) In-service recommendations
    Annex F (informative) Typical glove dimensions
    Annex G (informative) Cotton canvas additional characteristics
    Annex H (informative) Acceptance tests
    Annex I (informative) Electrical limits for the use of gloves
                           of insulating material
    Annex ZA (normative) Normative references to international
                           publications with their corresponding European
                           publications
    Bibliography

    Abstract - (Show below) - (Hide below)

    Pertains to insulating gloves and mitts which should normally be used in conjunction with leather protector gloves worn over the insulating gloves to provide mechanical protection; and insulating gloves and mitts usable without over-gloves for mechanical protection.

    General Product Information - (Show below) - (Hide below)

    Committee TC 78
    Development Note Supersedes EN 50237 (01/2004)
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    UNE-EN 61821:2015 Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits
    CEI EN 50321 : 2000 ELECTRICALLY INSULATING FOOTWEAR FOR WORKING ON LOW VOLTAGE INSTALLATIONS
    I.S. EN 50110-1:2013 OPERATION OF ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    EN 12477:2001/A1:2005 PROTECTIVE GLOVES FOR WELDERS
    EN 61821:2011 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - MAINTENANCE OF AERONAUTICAL GROUND LIGHTING CONSTANT CURRENT SERIES CIRCUITS (IEC 61821:2011)
    BS EN 16350:2014 Protective gloves. Electrostatic properties
    UNI EN 16350 : 2014 PROTECTIVE GLOVES - ELECTROSTATIC PROPERTIES
    BS EN 50321 : 2000 ELECTRICALLY INSULATING FOOTWEAR FOR WORKING ON LOW VOLTAGE INSTALLATIONS
    I.S. EN 61821:2011 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - MAINTENANCE OF AERONAUTICAL GROUND LIGHTING CONSTANT CURRENT SERIES CIRCUITS (IEC 61821:2011)
    CLC/TR 50488 : 2006 RAILWAY APPLICATIONS - SAFETY MEASURES FOR THE PERSONNEL WORKING ON OR NEAR OVERHEAD CONTACT LINES
    PREN 50321 : DRAFT 2013 LIVE WORKING - FOOTWEAR FOR ELECTRICAL PROTECTION - INSULATING FOOTWEAR AND OVERBOOTS
    CEI EN 50110-1 : 2014 OPERATION OF ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 50321:2003 ELECTRICITY INSULATING FOOTWEAR FOR WORKING ON LOW VOLTAGE INSTALLATIONS
    BS EN 50110-1:2013 Operation of electrical installations General requirements
    14/30281166 DC : 0 BS EN 50321 - LIVE WORKING - FOOTWEAR FOR ELECTRICAL PROTECTION - INSULATING FOOTWEAR AND OVERBOOTS
    I.S. EN 16350:2014 PROTECTIVE GLOVES - ELECTROSTATIC PROPERTIES
    DIN EN 16350:2014-07 PROTECTIVE GLOVES - ELECTROSTATIC PROPERTIES
    BS EN 50237:2000 GLOVES AND MITTS WITH MECHANICAL PROTECTION FOR ELECTRICAL PURPOSES
    CEI CLC/TR 50488 : 2007 RAILWAY APPLICATIONS - SAFETY MEASURES FOR PERSONNEL WORKING NEAR OVERHEAD CONTACT LINES
    UNE-EN 16350:2014 Protective gloves - Electrostatic properties
    UNE-EN 50110-1:2014 Operation of electrical installations - Part 1: General requirements
    S.R. CLC/TR 50488:2007 RAILWAY APPLICATIONS - SAFETY MEASURES FOR THE PERSONNEL WORKING ON OR NEAR OVERHEAD CONTACT LINES
    BS EN 12477:2001 Protective gloves for welders
    EN 16350:2014 Protective gloves - Electrostatic properties
    BS EN 61821:2011 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - MAINTENANCE OF AERONAUTICAL GROUND LIGHTING CONSTANT CURRENT SERIES CIRCUITS
    CEI EN 61821 : 2012 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - MAINTENANCE OF AERONAUTICAL GROUND LIGHTING CONSTANT CURRENT SERIES CIRCUITS
    EN 50237 : 1997 GLOVES AND MITTS WITH MECHANICAL PROTECTION FOR ELECTRICAL PURPOSES
    EN 50110-1:2013 OPERATION OF ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    EN 50321 : 1999 ELECTRICITY INSULATING FOOTWEAR FOR WORKING ON LOW VOLTAGE INSTALLATIONS

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61477:2009 Live working - Minimum requirements for the utilization of tools, devices and equipment
    IEC 60060-2:2010 High-voltage test techniques - Part 2: Measuring systems
    IEC 61472:2013 Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
    ISO 2977:1997 Petroleum products and hydrocarbon solvents Determination of aniline point and mixed aniline point
    IEC 60212:2010 Standard conditions for use prior to and during the testing of solid electrical insulating materials
    ASTM F 496 : 2014-04 SPECIFICATION FOR IN-SERVICE CARE OF INSULATING GLOVES AND SLEEVES
    EN ISO 3104:1996 PETROLEUM AND ITS PRODUCTS - KINEMATIC VISCOSITY - PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY
    89/686/EEC : 1989 AMD 5 2012 COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT
    IEC 60050-601:1985 International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    HD 437 : 200S1 STANDARD CONDITIONS FOR USE PRIOR TO AND DURING THE TESTING OF SOLID ELECTRICAL INSULATING MATERIALS
    EN 388 : 1994 PROTECTIVE GLOVES AGAINST MECHANICAL RISKS
    IEC 60743:2013 Live working - Terminology for tools, devices and equipment
    EN 60743:2013 LIVE WORKING - TERMINOLOGY FOR TOOLS, DEVICES AND EQUIPMENT (IEC 60743:2013)
    HD 588.1 : S1 AMD 1 HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS
    EN 60060-2:2011 HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS
    EN 420:2003+A1:2009 PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS
    ISO 472:2013 Plastics Vocabulary
    EN 61477:2009/corrigendum:2010 LIVE WORKING - MINIMUM REQUIREMENTS FOR THE UTILIZATION OF TOOLS, DEVICES AND EQUIPMENT
    EN ISO 9001:2015 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015)
    ISO 9004:2009 Managing for the sustained success of an organization A quality management approach
    IEC 61318:2007 Live working - Conformity assessment applicable to tools, devices and equipment
    ISO 9001:2015 Quality management systems - Requirements
    ISO 9000:2015 Quality management systems Fundamentals and vocabulary
    ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
    IEC 60050-651:2014 International Electrotechnical Vocabulary (IEV) - Part 651: Live working
    EN ISO 2592:2017 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017)
    IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
    EN ISO 472 : 2013 PLASTICS - VOCABULARY (ISO 472:2013)
    EN ISO 9000 : 2015 QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015)
    ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective