EN 61000-2-4:2002/AC:2014

Current

Current The latest, up-to-date edition.

ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES

Available format(s):

Language(s):

Published date: 10-07-2014

Publisher: European Committee for Standards - Electrical

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 Electromagnetic environment classes
5 Compatibility levels
6 Compatibility levels
Annex A (informative) - Explanations and examples for
        interharmonics
Annex B (informative) - Examples of expected disturbance levels
        in typical industrial networks
Annex C (informative) - Interharmonic and voltages at higher
        frequencies
Bibliography
Annex ZA (normative) - Normative references to international
         publications with their corresponding European
         publications

Abstract - (Show below) - (Hide below)

Deals with conducted disturbances in the frequency range from 0 kHz to 9 kHz. Also provides numerical compatibility levels for industrial and non-public power distribution systems at nominal voltages up to 35 kV and a nominal frequency of 50 Hz or 60 Hz.

General Product Information - (Show below) - (Hide below)

Committee	TC 210
Document Type	Standard
ISBN
Pages
Published
Publisher	European Committee for Standards - Electrical
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
IEC 61000-2-4:2002	Identical
IEC 61000-2-4:2002/COR1:2014	Identical
NBN EN 61000 2-4 : 2003 COR 2015	Identical
NEN EN IEC 61000-2-4 : 2002	Identical
I.S. EN 61000-2-4:2002	Identical
PN EN 61000-2-4 : 2003	Identical
SN EN 61000-2-4 : 2002	Identical
DIN EN 61000-2-4 : 2003	Identical
VDE 0839-2-4 : 2003	Identical
UNE-EN 61000-2-4:2004	Identical
BS EN 61000-2-4:2002	Identical
CEI EN 61000-2-4 : 2003	Identical
NF EN 61000-2-4 : 2003	Identical
NEN 11000-2-4 : 1995	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

CEI EN 62586-2 : 2015	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
EN 61000-4-30:2015/AC:2017-01	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS (IEC 61000-4-30:2015/COR1:2016)
14/30297515 DC : 0	BS EN 16704-2-1 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-1: COMMON SOLUTIONS AND TECHNOLOGY - TECHNICAL REQUIREMENTS FOR TRACK WARNING SYSTEMS (TWS)
CLC/TS 50217:2005	Guide for in situ measurements - In situ measurement of disturbance emission
BS EN 50240:2004
DD CLC/TS 50217:2005	GUIDE FOR IN SITU MEASUREMENTS - IN SITU MEASUREMENT OF DISTURBANCE EMISSION
BS EN 61800-5-2:2017	Adjustable speed electrical power drive systems Safety requirements. Functional
09/30214359 DC : 0	BS EN 50533 - RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
I.S. EN 50125-3:2003	RAILWAY APPLICATION - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 3: EQUIPMENT FOR SIGNALLING AND TELECOMMUNICATIONS
UNE-EN 61000-4-30:2015	Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
BS EN 61000-4-27 : 2001	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-27: TESTING AND MEASUREMENT TECHNIQUES - UNBALANCE, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
CEI EN 50328 : 2003	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRONIC POWER CONVERTERS FOR SUBSTATIONS
BS EN 50533 : 2011	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
PD CLC/TR 50646:2015	RAILWAY APPLICATION - FIXED INSTALLATIONS - SPECIFICATION FOR REVERSIBLE D.C. SUBSTATIONS
CEI EN 60146-2 : 2001	SEMICONDUCTOR CONVERTERS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTERS INCLUDING DIRECT D.C. CONVERTERS
CEI EN 61000-3-12 : 2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE
I.S. EN 61000-4-30:2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
I.S. EN 50328:2007	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRONIC POWER CONVERTERS FOR SUBSTATIONS
EN 61000-4-8:2010	Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
EN 61000-4-13:2002/A2:2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS (IEC 61000-4-13:2002/A2:2015)
EN 61000-3-12:2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011)
EN 50125-3 : 2003 COR 2010	RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 3: EQUIPMENT FOR SIGNALLING AND TELECOMMUNICATIONS
EN 61136-1 : 1995	SEMICONDUCTOR POWER CONVECTORS - ADJUSTABLE SPEED ELECTRIC DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS, PARTICULARLY FOR D.C. MOTOR DRIVES
EN 61000-4-27:2000/A1:2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-27: TESTING AND MEASUREMENT TECHNIQUES - UNBALANCE, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
UNE-EN 62586-2:2014	Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
EN 61000-2-12:2003	Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
EN 61800-5-2:2017	Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
03/111744 DC : DRAFT JULY 2003
CEI EN 62274 : 2005	MEDICAL ELECTRICAL EQUIPMENT - SAFETY OF RADIOTHERAPY RECORD AND VERIFY SYSTEMS
UNE-EN 61000-3-12:2012	Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and
I.S. EN 61000-4-14:1999	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
UNE EN 62586-2 : 2014	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
I.S. EN 16704-2-1:2016	RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-1: COMMON SOLUTIONS AND TECHNOLOGIES - TECHNICAL REQUIREMENTS FOR TRACK WARNING SYSTEMS (TWS)
I.S. EN 61000-4-27:2000	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-27: TESTING AND MEASUREMENT TECHNIQUES - UNBALANCE, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
BS EN 50600-2-2:2014	Information technology. Data centre facilities and infrastructures Power distribution
I.S. EN 60146-1-1:2010	SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
I.S. EN 809:1998	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
DIN EN 61800-1 : 1999-08	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS; RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
VDE 0160-101 : 1999-08	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
CEI EN 61800-1 : 2000	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
DIN EN 60146-2 : 2001	SEMICONDUCTOR CONVERTORS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTORS INCLUDING DIRECT D.C. CONVERTORS
VDE 0558-2 : 2001	SEMICONDUCTOR CONVERTORS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTORS INCLUDING DIRECT D.C. CONVERTORS
VDI 3551:2011-01	ELECTROMAGNETIC COMPATIBILITY (EMC) IN BUILDING SERVICES
I.S. EN 61800-3:2005	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV))
I.S. EN 50600-2-2:2014	INFORMATION TECHNOLOGY - DATA CENTRE FACILITIES AND INFRASTRUCTURES - PART 2-2: POWER DISTRIBUTION
BS EN 61000-4-28 : 2000	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-28: TESTING AND MEASUREMENT TECHNIQUES - VARIATION OF POWER FREQUENCY, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
BS EN 61800-3 : 2004	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
BS EN 61000-4-30:2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS (IEC 61000-4-30:2015)
BS EN 50125-3:2003	Railway applications. Environmental conditions for equipment Equipment for signalling and telecommunications
BS EN 61136-1:1998	SEMICONDUCTOR POWER CONVERTORS - ADJUSTABLE SPEED ELECTRIC DRIVE SYSTEMS - GENERAL REQUIREMENTS - PART 1: RATING SPECIFICATIONS, PARTICULARLY FOR D.C. MOTOR DRIVES
I.S. EN 50533:2011	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
I.S. CLC/TS 50217:2005	GUIDE FOR IN SITU MEASUREMENTS - IN SITU MEASUREMENT OF DISTURBANCE EMISSION
CEI EN 61000-2-12 : 2004	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-12: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
EN 62586-2:2017	Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
BS EN 809 : 1998	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
UNE-EN 50160:2011	Voltage characteristics of electricity supplied by public electricity networks
EN 809 : 1998 COR 2010	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 809:1998+A1:2009	Pumps and pump units for liquids - Common safety requirements
EN 50600-2-2:2014	Information technology - Data centre facilities and infrastructures - Part 2-2: Power distribution
UNI EN 809 : 2009	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 61000-4-28:2000/A2:2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-28: TESTING AND MEASUREMENT TECHNIQUES - VARIATION OF POWER FREQUENCY, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
I.S. EN 61000-2-12:2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
I.S. EN 62274:2005	MEDICAL ELECTRICAL EQUIPMENT - SAFETY OF RADIOTHERAPY RECORD AND VERIFY SYSTEMS
08/30180966 DC : DRAFT APR 2008	BS EN 50160 - VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC DISTRIBUTION NETWORKS
CEI EN 50125-3 : 2004	RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 3: EQUIPMENT FOR SIGNALLING AND TELECOMMUNICATIONS
BS EN 16704-2-1:2016	Railway applications. Track. Safety protection on the track during work Common solutions and technologies. Technical requirements for Track Warning Systems (TWS)
BS EN 61000-2-12:2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-12: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
BS EN 62274:2005	MEDICAL ELECTRICAL EQUIPMENT - SAFETY OF RADIOTHERAPY RECORD AND VERIFY SYSTEMS
02/204840 DC : DRAFT APR 2002	PREN 50217 - IN SITU MEASUREMENTS OF DISTURBANCE EMISSION
CEI EN 61800-5-2 : 2009	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
BS EN 61000-4-14 : 1999	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
I.S. EN 50160:2010	VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
I.S. EN 60146-2:2003	SEMICONDUCTOR CONVERTERS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTERS INCLUDING DIRECT D.C. CONVERTERS
CEI EN 60146-1-1 : 2013	SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
I.S. EN 50240:2006
CEI EN 50533 : 2012	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
I.S. EN 61136-1:1996	SEMICONDUCTOR POWER CONVERTORS - ADJUSTABLE SPEED ELECTRIC DRIVE SYSTEMS GENERAL REQUIREMENTS - PART 1: RATING SPECIFICATIONS, PARTICULARLY FOR D.C. MOTOR DRIVES
DIN EN 809:2012-10	Pumps and pump units for liquids - Common safety requirements
95/214868 DC : 0	PREN 50178 - ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS
EN 16704-2-1:2016	Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS)
UNE-EN 50533:2012	Railway applications - Three-phase train line voltage characteristics.
BS EN 61800-4:2003	Adjustable speed electrical power drive systems General requirements. Rating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV
UNE-EN 16704-2-1:2017	Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS)
BS EN 50328:2003	Railway applications. Fixed installations. Electronic power convertors for substations
PREN 50533 : DRAFT 2009	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
BS EN 61000-3-12:2011	Electromagnetic compatibility (EMC) Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase
BS EN 61000-4-8:2010	Electromagnetic compatibility (EMC) Testing and measurement techniques. Power frequency magnetic field immunity test
BS EN 60146-1-1:2010	Semiconductor converters. General requirements and line commutated converters Specification of basic requirements
S.R. CLC/TR 50646:2015	RAILWAY APPLICATION - FIXED INSTALLATIONS - SPECIFICATION FORREVERSIBLE D.C. SUBSTATIONS
I.S. EN 62586-2:2017	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
I.S. EN 61000-3-12:2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011 (EQV))
BS EN 61000-4-13 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS (IEC 61000-4-13:2002)
BS EN 50160 : 2010	VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
I.S. EN 61000-4-28:2000	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-28: TESTING AND MEASUREMENT TECHNIQUES - VARIATION OF POWER FREQUENCY, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
EN 50328 : 2003 COR 2006	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRONIC POWER CONVERTERS FOR SUBSTATIONS
CEI EN 61800-4 : 2003	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A/C/ POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV
EN 50160 : 2010 AMD 1 2015	VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
BS EN 809:1998+A1:2009	Pumps and pump units for liquids. Common safety requirements
I.S. EN 61800-5-2:2017	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
I.S. EN 61800-4:2003	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A.C. POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV
EN 61800-3 : 2004 AMD 1 2012	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011)
EN 62274:2005	Medical electrical equipment - Safety of radiotherapy record and verify systems
EN 61000-4-14:1999/A2:2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
EN 60146-1-1:2010	Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
EN 61800-4 : 2003	Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV
EN 50533 : 2011 AMD 1 2016	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
EN 50240:2004/corrigendum:2005
EN 60146-2:2000	Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters
CLC/TR 50646:2015	Railway Application - Fixed Installations - Specification for reversible d.c. substations
UNE-EN 809:1999	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60038:2009	IEC standard voltages
IEC 61000-4-15 : 2.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-15: TESTING AND MEASUREMENT TECHNIQUES - FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS
IEC 61000-2-12:2003	Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
IEC 60050-551:1998	International Electrotechnical Vocabulary (IEV) - Part 551: Power electronics
EN 61000-2-2:2002/A1:2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS (IEC 61000-2-2:2002/A1:2017)
IEC 60050-101:1998	International Electrotechnical Vocabulary (IEV) - Part 101: Mathematics
IEC 61000-4-15:2010	Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications
IEC TR 61000-2-1:1990	Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
IEC 61000-2-2:2002+AMD1:2017 CSV	Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
IEC 61000-4-7:2002+AMD1:2008 CSV	Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
IEC TR 61000-2-8:2002	Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
IEC 60050-551-20:2001	International Electrotechnical Vocabulary (IEV) - Part 551-20: Power electronics - Harmonic analysis

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart