EN 61076-2:2011
Current
The latest, up-to-date edition.
Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
29-07-2011
FOREWORD
1 Scope
2 Normative references
3 Technical information
4 Dimensional information
5 Characteristics
6 Tests and test schedules
7 Blank detail product specification - General
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
IEC 61076-2:2011 establishes uniform specifications and technical information for circular connectors. It should be used in conjunction with the generic specification IEC 61076-1:2006 for product requirements and with IEC 62197-1 for quality requirements as the basis for preparation of consistent detail product specifications for circular connectors. In the event of conflict between this sectional specification and the detail product specification, it is intended that the requirements of the detail product specification prevail. This second edition cancels and replaces the first edition of IEC 61076-2 (1998). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. This International Standard no longer includes the quality assessment procedures. As described in IEC 61076-1 and IEC 62197-1, a new document structure has been established. IEC 61076-2 has been revised to reflect this updated structure. Subclause 3.2, Systems of levels has been introduced. The subclause on IEC type designation has been removed. Clauses 4 Dimensional information and 5 Characteristics have been added. Some clauses and test groups have been rearranged. Test group HP has been added.
| Committee |
CLC/SR 48B
|
| DevelopmentNote |
Supersedes EN 175200. (03/2004) To be read in conjunction with EN 61076-1 & EN 62197-1. (07/2011) Supersedes UNE EN 61076-2. (08/2014)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 61076-2 : 2012 | Identical |
| IEC 61076-2:2011 | Identical |
| NBN EN 61076-2 : 2011 | Identical |
| NEN EN IEC 61076-2 : 2011 | Identical |
| I.S. EN 61076-2:2011 | Identical |
| PN EN 61076-2 : 2011 | Identical |
| SN EN 61076-2 : 1999 | Identical |
| DIN EN 61076-2 : 2012 | Identical |
| VDE 0687-76-2 : 2012 | Identical |
| UNE-EN 61076-2:2011 | Identical |
| BS EN 61076-2:2011 | Identical |
| UNE EN 61076-2 : 2001 | Identical |
| CEI EN 61076-2 : 2012 | Identical |
| UNE-EN 61076-2:2001 | Identical |
| PNE-FprEN 61076-2 | Identical |
| BS EN 61076-2-102:2002 | Connectors for electronic equipment. Circular connectors Circular connectors with assessed quality. Detail specification for plugs and jacks for external low voltage power supply |
| CEI EN 61076-2-102 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY |
| EN 61076-2-106:2011 | Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
| BS EN 61076-2-106:2011 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
| BS EN 61076-2-001:2011 | Connectors for electronic equipment. Product requirements Circular connectors. Blank detail specification |
| CEI EN 61076-2-106 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67 |
| I.S. EN 61076-2-106:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67 |
| BS EN 61076-2-109:2014 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz |
| CEI EN 61076-2-001 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION |
| I.S. EN 61076-2-109:2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ |
| BS EN 60297-5-107:2001 | Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Subracks and associated plug-in units Rear mounted plug-in units |
| IEC 61076-2-102:2002 | Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply |
| I.S. EN 61076-2-102:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY |
| I.S. EN 61076-2-001:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION |
| EN 61076-2-109:2014 | Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz |
| EN 61076-2-102:2002 | Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply |
| EN 61076-2-001:2011 | Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification |
| IEC 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| IEC 61076-2-001:2011 | Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| EN 60512-1-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications |
| EN 61076-2-001:2011 | Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| EN 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| IEC 60512-1-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications |
| EN 62197-1 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
| IEC 62197-1:2006 | Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.