Skip to content
Please enter a keyword to search

  • EN 61169-16:2007

    Current The latest, up-to-date edition.

    Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristic impedance 50 ohms (75 ohms) (type N)

    Available format(s): 

    Language(s): 

    Published date:  11-04-2007

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 Scope
    2 Normative references
    3 IEC type designation
    4 Interface dimensions
      4.1 Dimensions - General purpose connectors - Grade 2
    5 Mechanical gauges and standard test connectors
      5.1 Mechanical gauges
      5.2 Standard test connectors - Grade 0
    6 Overall dimensions
    7 Quality assessment procedures
      7.1 General
      7.2 Ratings and characteristics
      7.3 Test schedule and inspection requirements
      7.4 Procedures
    8 Instructions for preparation of detail specifications
      8.1 General
      8.2 Identification of the Detail specification
      8.3 Identification of the component
      8.4 Performance
      8.5 Marking, ordering information and related matters
      8.6 Selection of tests, test conditions and severities
      8.7 Blank detail specification pro-forma for type N
          connector
    Annex A (informative) - Guidance information for interface
             dimensions of 75 ohms characteristic impedance
             general purpose connectors
    Annex ZA (normative) - Normative references to international
             publications with their corresponding European
             publications
    Bibliography

    Abstract - (Show below) - (Hide below)

    Provides information and rules for the preparation of Detail Specifications (DS) for pin and socket R.F. coaxial connectors, with screw coupling mechanism, for low to medium power applications. The connector is commonly known as the 'type N'. Three versions of the 50 characteristic impedance type N connector are included, each version being mateable with each of the others.

    General Product Information - (Show below) - (Hide below)

    Committee CLC/SR 46F
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 60512-29-100:2015 Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g
    BS EN 60512-27-100:2012 Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors. Tests 27a to 27g
    I.S. EN 50289-1-1:2017 COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-1: ELECTRICAL TEST METHODS - GENERAL REQUIREMENTS
    CEI EN 60512-29-100 : 2016 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G
    EN 60512-27-100:2012 Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g
    EN 60512-29-100 : 2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
    BS EN 60512-26-100 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G
    I.S. EN 60512-29-100:2015 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G
    I.S. EN 60512-28-100:2013 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 28-100: SIGNAL INTEGRITY TESTS UP TO 1000 MHZ ON IEC 60603-7 AND IEC 61076-3 SERIES CONNECTORS - TESTS 28A TO 28G (IEC 60512-28-100:2013(EQV))
    I.S. EN 60512-27-100:2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 27-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON IEC 60603-7 SERIES CONNECTORS - TESTS 27A TO 27G (IEC 60512-27-100:2011 (EQV))
    BS EN 50289-1-1:2017 Communication cables. Specifications for test methods Electrical test methods. General requirements
    PREN 50289-1-1 : DRAFT 2016 COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-1: ELECTRICAL TEST METHODS - GENERAL REQUIREMENTS
    EN 60512-28-100:2013 Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g
    CEI EN 60512-27-100 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 27-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON IEC 60603-7 SERIES CONNECTORS - TESTS 27A TO 27G
    CEI EN 60512-28-100 : 2014 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 28-100: SIGNAL INTEGRITY TESTS UP TO 1000 MHZ ON 60603-7 AND 61076-3 SERIES CONNECTORS - TESTS 28A TO 28G
    CEI EN 50289-1-1 : 2001 COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-1: ELECTRICAL TEST METHODS - GENERAL REQUIREMENTS
    I.S. EN 60512-26-100:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G
    16/30342119 DC : 0 BS EN 50289-1-1 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-1: ELECTRICAL TEST METHODS - GENERAL REQUIREMENTS
    BS EN 60512-28-100:2013 Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 1000 MHz on IEC 60603-7 and IEC 61076-3 series connectors. Tests 28a to 28g
    UNE-EN 50289-1-1:2017 Communication cables - Specifications for test methods - Part 1-1: Electrical test methods - General requirements
    EN 50289-1-1:2017 Communication cables - Specifications for test methods - Part 1-1: Electrical test methods - General requirements
    EN 60512-26-100:2008/A1:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G

    Standards Referencing This Book - (Show below) - (Hide below)

    HD 351.1 : 200S1 RIGID PRECISION COAXIAL LINES AND THEIR ASSOCIATED PRECISION CONNECTORS - GENERAL REQUIREMENTS AND MEASURING METHODS
    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    HD 351.2 : 200S1 RIGID PRECISION COAXIAL LINES AND THEIR ASSOCIATED PRECISION CONNECTORS - 50 OHM 7 mm RIGID PRECISION COAXIAL LINE AND ASSOCIATED HERMAPHRODITIC PRECISION COAXIAL CONNECTOR
    IEC 60096-2:1961 Radio-frequency cables - Part 2: Relevant cable specifications
    EN 60068-1:2014 Environmental testing - Part 1: General and guidance
    EN 61169-1:2013/AC:2016-02 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
    IEC 61169-1:2013 Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
    HD 351.3 : 200S2 RIGID PRECISION COAXIAL LINES AND THEIR ASSOCIATED PRECISION CONNECTORS - 14mm RIGID PRECISION COAXIAL LINE AND ASSOCIATED HERMAPHRODITIC PRECISION COAXIAL CONNECTOR - CHARACTERISTIC IMPEDANCES 50 OHMS AND 75 OHMS
    HD 351.4 : 200S2 RIGID PRECISION COAXIAL LINES AND THEIR ASSOCIATED PRECISION CONNECTORS - 21mm RIGID PRECISION COAXIAL LINE AND ASSOCIATED HERMAPHRODITIC PRECISION COAXIAL CONNECTOR - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE 9/21) - CHARACTERISTIC IMPEDANCE 75 OHMS (TYPE 6/21)
    ISO 370:1975 Toleranced dimensions Conversion from inches into millimetres and vice versa
    HD 351.5 : 200S1 RIGID PRECISION COAXIAL LINES AND THEIR ASSOCIATED PRECISION CONNECTORS - 50 OHMS 3.5 MM RIGID PRECISION COAXIAL LINE WITH PROVISION FOR MOUNTING CONNECTORS
    ISO 263:1973 ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0,06 to 6 in
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective