EN 61300-3-30:2003

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors

Available format(s):

Superseded date: 12-02-2021

Language(s):

Published date: 31-01-2003

Publisher: European Committee for Standards - Electrical

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

FOREWORD
1 Scope
2 Normative references
3 General description
4 Apparatus
  4.1 Ferrule holder
  4.2 Positioning stage
  4.3 Three-dimensional interferometry
5 Procedure
  5.1 Measurement regions
  5.2 Method for analysis
6 Details to be specified
Annex A (informative) Formula for calculating end
        face geometry
Annex B (normative) Surface angle sign convention
Annex C (normative) Fibre counting convention
Bibliography

Abstract - (Show below) - (Hide below)

Describes a procedure to assess end face geometry in guide pin based multifibre ferrules and connectors. Fibre position relative to the end face, either undercut or protrusion, end face angle relative to the guide pin bores, and core dip for multimode fibre are the primary attributes.

General Product Information - (Show below) - (Hide below)

Committee	CLC/TC 86BXA
Document Type	Standard
ISBN
Pages
Published
Publisher	European Committee for Standards - Electrical
Status	Superseded
Superseded By	EN IEC 61300-3-30:2021

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
I.S. EN 61300-3-30:2003	Identical
DIN EN 61300-3-30:2016-06 (Draft)	Identical
UNE-EN 61300-3-30:2003	Identical
NF EN 61300-3-30 : 2004	Identical
NEN EN IEC 61300-3-30 : 2003	Identical
SN EN 61300-3-30 : 2003	Identical
CEI EN 61300-3-30 : 2003	Identical
BS EN 61300-3-30:2003	Identical
NBN EN 61300 3-30 : 2003	Identical
PN EN 61300-3-30 : 2006	Identical
IEC 61300-3-30:2003	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS EN 50377-9-1:2003	Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre
NF EN 50377-15-1 : 2011	CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE
I.S. EN 61755-3-31:2015	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-31: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - ANGLED POLYPHENYLENE SULPHIDE RECTANGULAR FERRULES
I.S. EN 61755-3-32:2016	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-32: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - ANGLED THERMOSET EPOXY RECTANGULAR FERRULES
EN 61755-3-32:2016	Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules
EN 50377-11-1:2008	Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C
EN 50377-15-1:2011	Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre
BS EN 50377-11-1:2008	Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C
08/30185105 DC : DRAFT JULY 2008	BS EN 50377-15-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE
I.S. EN 50377-9-1:2003	CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 9-1: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE
BS EN 61755-3-31:2015	Fibre optic interconnecting devices and passive components. Connector optical interfaces Connector parameters of non-dispersion shifted single mode physically contacting fibres. Angled polyphenylene sulphide rectangular ferrules
17/30353664 DC : 0	BS EN 50377-18-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 18-1: TYPE 4+4X10.3125 GB/S MPO (QFSP) TRANSCEIVER MATED WITH AN MPO CONNECTOR EQUIPPED WITH 12 FIBRE PPS FERRULES TERMINATED ON EN 60793-2-10 CATEGORY A1A.3A OR A1A.3B 50/125 MICRON MULTIMODE FIBRE
I.S. EN 50377-11-1:2008	CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C
EN 50377-9-1:2003	Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 9-1: Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre
CEI EN 50377-15-1 : 2012	CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE
CEI EN 61755-3-31 : 2016	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-31: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - ANGLED POLYPHENYLENE SULPHIDE RECTANGULAR FERRULES
BS EN 50377-15-1:2011	Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre
CEI EN 50377-11-1 : 2009	CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C
I.S. EN 50377-15-1:2011	CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE
EN 61755-3-31:2015	Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules

Standards Referencing This Book - (Show below) - (Hide below)

IEC 61753-1-1:2000	Fibre optic interconnecting devices and passive components performance standard - Part 1-1: General and guidance - Interconnecting devices (connectors)

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart