EN 61779-1 : 2000 AMD 11 2004

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS

Available format(s):

Superseded date: 01-11-2007

Language(s):

Published date: 17-02-2004

Publisher: European Committee for Standards - Electrical

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

1 General
  1.1 Scope
  1.2 Normative references
2 Definitions
  2.1 Gas properties
  2.2 Types of instruments
  2.3 Sensors
  2.4 Supply of gas to instrument
  2.5 Signals and alarms
  2.6 Times
  2.7 Miscellaneous
3 General requirements
  3.1 Introduction
  3.2 Construction
4 Test methods
  4.1 Introduction
  4.2 General requirements for tests
  4.3 Normal conditions for tests
  4.4 Test methods
5 Field calibration kit
6 Information for use
Annex A (normative) Flammability limits (i.e. LFL and UFL)
                    of some flammable gases and vapours
Annex B (informative) Determination of time of response
Annex C (informative) Bibliography
Annex ZA (normative) Normative references to international
                     publications with their corresponding
                     European publications

Abstract - (Show below) - (Hide below)

Gives general requirements for the construction and testing and describes the test methods applicable to portable, transportable and fixed apparatus for detecting and measuring flammable gas or vapour concentrations with air. The apparatus, or parts of apparatus are meant for use in potentially explosive atmospheres and in mines susceptible to firedamp. This standard is supplemented by the following standards: IEC 61779-2, IEC 61779-3, IEC 61779-4 and IEC 61779-5.

General Product Information - (Show below) - (Hide below)

Committee	SC 31-9
Development Note	Supersedes EN 50054 (01/2004)
Document Type	Standard
ISBN
Pages
Published
Publisher	European Committee for Standards - Electrical
Status	Superseded
Superseded By	EN 60079-29-1:2016
Supersedes	EN 50054:1998

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NEN EN IEC 61779-1 : 2000 AMD 11 2004	Identical
I.S. EN 61779-1:2003	Identical
SN EN 61779-1 : 2000	Identical
BS EN 61779-1:2000	Identical
IEC 61779-1:1998	Identical
UNE-EN 61779-1:2002	Identical
CEI EN 61779-1/A11:2005	Identical
NF EN 61779-1 : 2005 AMD 11 2005	Identical
DIN EN 61779-1 : 2001 AMD 11 2004	Identical
PN EN 61779-1 : 2004 AMD 11 2005	Identical
NBN EN 61779-1 : 2001 AMD 1 2005	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

I.S. EN 15001-1:2009	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
09/30198043 DC : 0	BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
08/30176065 DC : DRAFT JAN 2008	BS EN 50194-1 - ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS
EN 15339-2:2007	Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
DIN EN 13355:2010-06	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
EN 12753:2005+A1:2010	Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
EN 50381 : 2004 COR 2005	TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE
EN 12921-1:2005+A1:2010	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 13355:2004+A1:2009	Coating plants - Combined booths - Safety requirements
UNI EN ISO 8230-3 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
DIN EN 15001-1:2011-02	Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
CEI 216-8 : 2005	FLUSH-TYPE DETECTORS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - TEST METHODS AND PERFORMANCE REQUIREMENTS
04/30115623 DC : DRAFT JUN 2004	EN 50402 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS
05/30127970 DC : DRAFT JAN 2005	EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
BS EN 50381:2004	Transportable ventilated rooms with or without an internal source of release
CEI 216-5/1 : 2002	ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF BURNING VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS - PART 1:GENERAL REQUIREMENTS AND TEST METHODS FOR CONTROL BOARDS AND CONTROL AND SIGNALLING BOARDS
BS EN 13355 : 2004	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
I.S. EN 12921-3:2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
I.S. EN 13355:2005	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
DIN EN 15339-2:2007-06	Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
I.S. EN 12753:2005	THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 12921-1:2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
PREN 13160-4 : DRAFT 2014	LEAK DETECTION SYSTEMS - PART 4: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR SENSOR BASED LEAK DETECTION SYSTEMS
14/30301254 DC : 0	BS EN 13160-4 - LEAK DETECTION SYSTEMS - PART 4: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR SENSOR BASED LEAK DETECTION SYSTEMS
DIN EN ISO 8230-3:2009-05	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
I.S. EN 15339-2:2007	THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS
CEI EN 50381 : 2006	TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE
DIN EN 12921-1:2011-02	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
UNE-EN 15001-1:2010	Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
BS EN 12921-3 : 2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
BS EN 12753 : 2005	THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 12921-1 : 2010	MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 15001-1 : 2009	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 12753 : 2010	THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 13355 : 2009	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
UNI EN 12921-3 : 2009	MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
CEI 216-5/3 : 2002	ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF FLAMMABLE VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS - PART 3:GENERAL REQUIREMENTS AND TEST METHODS FOR DETECTORS OF GASES AND FLAMMABLE VAPOURS WITH PROPORTIONAL OUTPUTS
I.S. EN ISO 8230-3:2008	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
DIN EN 12753:2011-02	Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010)
ISO 8230-3:2008	Safety requirements for dry-cleaning machines Part 3: Machines using combustible solvents
BS EN 15339-2:2007	Thermal spraying. Safety requirements for thermal spraying equipment Gas control units
EN 15001-1:2009	Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN ISO 8230-3:2008	Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)
BS EN ISO 8230-3:2008	Safety requirements for dry-cleaning machines Machines using combustible solvents
BS EN 15001-1:2009	Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
14/30297213 DC : 0	BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
CEI 216-5/2 : 2002	ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF BURNING VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS PART 2:GENERAL REQUIREMENTS AND TEST METHODS FOR DETECTORS OF GASES AND FLAMMABLE VAPOURS WITH ONE OR MORE FIXED ALARM LEVELS
I.S. EN 50381:2004	TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE
DIN EN 12921-3:2010-02	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids (includes Amendment A1:2008)
BS EN 12921-1 : 2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
EN 12921-3:2005+A1:2008	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60050-351:2013	International Electrotechnical Vocabulary (IEV) - Part 351: Control technology
IEC 60079-1:2014 RLV	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 50270:2015	Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
IEC 60079-10:2002	Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
IEC 61000-4-1:2006	Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
IEC 60079-19:2010+AMD1:2015 CSV	Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
IEC 60079-18:2014 RLV	Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
IEC 61000-4-4:2012 RLV	Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 60079-5:2015 RLV	Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
ISO 6147:1979	Gas analysis Preparation of calibration gas mixtures Saturation method
IEC 60079-11:2011	Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
ISO 6142:2001	Gas analysis Preparation of calibration gas mixtures Gravimetric method
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV	Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 60079-6:2015	Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
IEC 60079-0:2011	Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60079-14:2013	Explosive atmospheres - Part 14: Electrical installations design, selection and erection
EN 50073:1999	Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
ISO 6145-4:2004	Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 4: Continuous syringe injection method
ISO 6145-3:1986	Gas analysis Preparation of calibration gas mixtures Dynamic volumetric methods Part 3: Periodic injections into a flowing gas stream
ISO 6145-1:2003	Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration
ISO 6145-6:2017	Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 6: Critical flow orifices
IEC 60079-15:2010	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
IEC 60079-13:2017	Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart