EN 62012-1:2002

Current

Current The latest, up-to-date edition.

Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification

Available format(s):

Language(s):

Published date: 31-10-2002

Publisher: European Committee for Standards - Electrical

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 General
  1.1 Scope
  1.2 Normative references
  1.3 Definitions
  1.4 Environmental considerations
2 Materials and cable construction
  2.1 General remarks
  2.2 Cable construction
  2.3 Identification
  2.4 Finished cable
3 Test methods
  3.1 General remarks
  3.2 Electrical tests
  3.3 Mechanical and dimensional measurement tests
  3.4 Environmental tests
  3.5 Temperature tests
  3.6 Chemical tests
  3.7 Radiation tests
Annex A (normative) Horizontal integrated fire-test method
  A.1 Definitions, symbols and abbreviations
  A.2 Test environment
  A.3 Test apparatus
  A.4 Test specimens
  A.5 Calibration and maintenance of test equipment
  A.6 Test specimen preparation
  A.7 Test procedures
  A.8 Post-test clean-up and inspection
  A.9 Calculations
  A.10 Report
Annex B (normative) Method for determining suitability of
        oxygen analysers for making heat release
        measurements
  B.1 General
  B.2 Procedure
  B.3 Additional precautions
Annex C (informative) Material information list
  C.1 Analyser
  C.2 Fire-test chamber
  C.3 Firebrick
  C.4 Inside glass panes
  C.6 Recording device
  C.5 Lamp
  C.7 Bi-directional probe
  C.8 Neutral density filters
  C.9 Gas calorimeter
  C.10 Standard insulated conductor (calibration cable)
Annex D (informative) Brick sizes
Annex ZA (normative) Normative references to international
         publications with their corresponding
         European publications
Bibliography

Abstract - (Show below) - (Hide below)

specifies the definitions and test methods, when used in harsh environment, of symmetrical pair and quad cables used in digital communication systems such as ISDN, local area networks and data communication systems. gives guidance concerning the design and testing of these cables.

General Product Information - (Show below) - (Hide below)

Committee	CLC/TC 46X
Document Type	Standard
ISBN
Pages
Published
Publisher	European Committee for Standards - Electrical
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
UNE-EN 62012-1:2002	Identical
PN EN 62012-1 : 2003	Identical
NEN EN IEC 62012-1 : 2002	Identical
I.S. EN 62012-1:2002	Identical
IEC 62012-1:2002	Identical
NF EN 62012-1 : 2004	Identical
BS EN 62012-1:2002	Identical
CEI EN 62012-1 : 2003	Identical
NBN EN 62012-1 : 2002	Identical
DIN EN 62012-1:2003-06	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

13/30279981 DC : 0	BS EN 50599 - BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
CEI EN 50603 : 2014	GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS E APPLICATIONS - DETAIL SPECIFICATION
BS EN 50599:2014	Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Screened straight patch cords and straight work area cords for class D applications. Detail specification
I.S. EN 61935-2-20:2009	TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH SERIES EN 50173 - PART 2-20: PATCH CORDS AND WORK AREA CORDS - BLANK DETAIL SPECIFICATION FOR CLASS D APPLICATIONS
CEI EN 50602 : 2014	GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - UNSCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS E APPLICATIONS - DETAIL SPECIFICATION
EN 50603:2014	Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Screened straight patch cords and straight work area cords for class E applications - Detail specification
EN 50601:2014	Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Unscreened straight patch cords and straight work area cords for class D applications - Detail specification
EN 50602:2014	Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Unscreened straight patch cords and straight work area cords for class E applications - Detail specification
BS EN 50602:2014	Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Unscreened straight patch cords and straight work area cords for class E applications. Detail specification
CEI EN 50601 : 2014	GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - UNSCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
CEI EN 50173-1 : 2011	INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 50601:2014	GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
I.S. EN 50173-1:2011	INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
CEI EN 61935-2-20 : 2011	TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH SERIES EN 50173 - PART 2-20: PATCH CORDS AND WORK AREA CORDS - BLANK DETAIL SPECIFICATION FOR CLASS D APPLICATIONS
13/30279984 DC : 0	BS EN 50601 - BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 UNSCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
BS EN 50601:2014	Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Screened straight patch cords and straight work area cords for class D applications. Detail specification
BS EN 50173-1:2011	Information technology. Generic cabling systems General requirements
I.S. EN 50603:2014	GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS E APPLICATIONS - DETAIL SPECIFICATION
EN 50173-1:2011	Information technology - Generic cabling systems - Part 1: General requirements
BS EN 61935-2-20:2009	Testing of balanced communication cabling in accordance with series EN 50173 Patch cords and work area cords. Blank detail specification for class D applications
BS EN 50603:2014	Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Screened straight patch cords and straight work area cords for class E applications. Detail specification
CEI EN 50599 : 2014	GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
I.S. EN 50599:2014	GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
I.S. EN 50602:2014	GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - UNSCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS E APPLICATIONS - DETAIL SPECIFICATION
PREN 50601 : DRAFT 2013	BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 UNSCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
PREN 50599 : DRAFT 2013	BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
13/30279990 DC : 0	BS EN 50603 - BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS E APPLICATIONS - DETAIL SPECIFICATION
PREN 50603 : DRAFT 2013	BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS E APPLICATIONS - DETAIL SPECIFICATION
EN 50599:2014	Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Screened straight patch cords and straight work area cords for class D applications - Detail specification
EN 61935-2-20:2009	Testing of balanced communication cabling in accordance with series EN 50173 - Part 2-20: Patch cords and work area cords - Blank detail specification for class D applications

Standards Referencing This Book - (Show below) - (Hide below)

HD 505.1.3 : 200S2	COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS FOR GENERAL APPLICATION - METHODS FOR DETERMINING THE DENSITY - WATER ABSORPTION TESTS - SHRINKAGE TEST
IEC 60811-3-1:1985	Common test methods for insulating and sheathing materials ofelectric cables - Part 3: Methods specific to PVC compounds -Section One: Pressure test at high temperature - Tests forresistance to cracking
IEC 60028:1925	International standard of resistance for copper
IEC 60811-4-1:2004	Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope
IEC 60189-1:2007	Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
IEC 60794-1:1996	Optical fibre cables - Part1: Generic specification (Revision to IEC 794-1)
IEC 60304:1982	Standard colours for insulation for low-frequency cables and wires
IEC 60332-1:1993	Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable
IEC 60050-722:1992	International Electrotechnical Vocabulary (IEV) - Part 722: Telephony
ISO/IEC 11801:2002	Information technology Generic cabling for customer premises
HD 405.2 : 200S1	TESTS ON ELECTRIC CABLES UNDER FIRE CONDITIONS - TEST ON A SINGLE SMALL VERTICAL INSULATED COPPER WIRE OR CABLE
IEC 60050-704:1993	International Electrotechnical Vocabulary (IEV) - Part 704: Transmission
IEC 60754-1:2011	Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
IEC 60811-1-2:1985	Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods
IEC 60050-701:1988	International Electrotechnical Vocabulary (IEV) - Part 701: Telecommunications, channels and networks
IEC TR 60344:2007	Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide
IEC 60811-4-2:2004	Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation
HD 402 : 200S2	STANDARD COLOURS FOR INSULATION FOR LOW-FREQUENCY CABLES AND WIRES
IEC 60811-1-1:1993+AMD1:2001 CSV	Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
IEC 60811-1-3:1993+AMD1:2001 CSV	Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application -Methods for determining the density - Water absorption tests - Shrinkage test
IEC 60811-1-4:1985	Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature
IEC 61034-2:2005+AMD1:2013 CSV	Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements
IEC 60332-2:1989	Tests on electric cables under fire conditions. Part 2: Test on a single small vertical insulated copper wire or cable
IEC 61034-1:2005+AMD1:2013 CSV	Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
EN 60811-1-1:1995/A1:2001	INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - GENERAL APPLICATION - MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TESTS FOR DETERMINING MECHANICAL PROPERTIES
EN 60811-1-4:1995/A2:2001	INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1-4: GENERAL APPLICATION - TESTS AT LOW TEMPERATURE

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart