• EN 62209-2:2010

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODYMOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ)

    Available format(s): 

    Superseded date:  10-12-2021

    Language(s): 

    Published date:  12-01-2013

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Symbols and abbreviated terms
    5 Measurement system specifications
    6 Protocol for SAR evaluation
    7 Uncertainty estimation
    8 Measurement report
    Annex A (informative) - Phantom rationale
    Annex B (normative) - SAR measurement system verification
    Annex C (informative) - Fast SAR testing
    Annex D (informative) - Standard sources and phantoms
            for system validation
    Annex E (informative) - Example recipes for phantom
            tissue-equivalent liquids
    Annex F (normative) - SAR correction for deviations of
            complex permittivity from targets
    Annex G (informative) - Hands-free kit testing
    Annex H (informative) - Skin enhancement factor
    Annex I (informative) - Tissue-equivalent liquid dielectric
            property measurements and measurement uncertainty
            estimation
    Annex J (informative) - Testing compliance for the exposure
            of the hand
    Annex K (informative) - Test reduction
    Annex L (normative) - Power scaling procedure
    Annex M (informative) - Rationale for probe parameters
    Bibliography
    Annex ZA (normative) - Normative references to international
             publications with their corresponding European
             publications

    Abstract - (Show below) - (Hide below)

    Pertains to any wireless communication device capable of transmitting electromagnetic fields (EMF) intended to be used at a position near the human body, in the manner described by the manufacturer, with the radiating part(s) of the device at distances up to and including 200 mm from a human body, i.e. when held in the hand or in front of the face, mounted on the body, combined with other transmitting or non-transmitting devices or accessories (e.g. belt-clip, camera or Bluetooth add-on), or embedded in garments.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    EN 50527-2-2:2018 Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices - Part 2-2: Specific assessment for workers with cardioverter defibrillators (ICDs)
    I.S. EN 62232:2017 DETERMINATION OF RF FIELD STRENGTH, POWER DENSITY AND SAR IN THE VICINITY OF RADIOCOMMUNICATION BASE STATIONS FOR THE PURPOSE OF EVALUATING HUMAN EXPOSURE
    UNE-EN 50383:2011 Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz)
    17/30359914 DC : 0 BS EN 50527-2-2 - PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE TO ELECTROMAGNETIC FIELDS OF WORKERS BEARING ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: SPECIFIC ASSESSMENT FOR WORKERS WITH CARDIOVERTER DEFIBRILLATORS (ICDS)
    EN 62232:2017 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
    CEI EN 50383 : 2013 BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ)
    EN 62493:2015 Assessment of lighting equipment related to human exposure to electromagnetic fields
    I.S. EN 50566:2017 PRODUCT STANDARD TO DEMONSTRATE THE COMPLIANCE OF WIRELESS COMMUNICATION DEVICES WITH THE BASIC RESTRICTIONS AND EXPOSURE LIMIT VALUES RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS IN THE FREQUENCY RANGE FROM 30 MHZ TO 6 GHZ: HAND-HELD AND BODY MOUNTED DEVICES IN CLOSE PROXIMITY TO THE HUMAN BODY
    BS EN 50566:2017 Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body
    BS EN 50527-2-1:2016 Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices Specific assessment for workers with cardiac pacemakers
    11/30252989 DC : 0 BS EN 50566 - PRODUCT STANDARD TO DEMONSTRATE COMPLIANCE OF RADIO FREQUENCY FIELDS FROM HANDHELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES (30 MHZ - 6 GHZ)
    NF EN 50383 : 2010 BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ)
    PREN 50527-2-2 : DRAFT 2017 PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE TO ELECTROMAGNETIC FIELDS OF WORKERS BEARING ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: SPECIFIC ASSESSMENT FOR WORKERS WITH CARDIOVERTER DEFIBRILLATORS (ICDS)
    CEI EN 62232 : 1ED 2018 DETERMINATION OF RF FIELD STRENGTH, POWER DENSITY AND SAR IN THE VICINITY OF RADIOCOMMUNICATION BASE STATIONS FOR THE PURPOSE OF EVALUATING HUMAN EXPOSURE
    CEI EN 50566 : 2014 PRODUCT STANDARD TO DEMONSTRATE COMPLIANCE OF RADIO FREQUENCY FIELDS FROM HANDHELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES USED BY THE GENERAL PUBLIC (30 MHZ - 6 GHZ)
    PREN 50566 : DRAFT 2017 PRODUCT STANDARD TO DEMONSTRATE THE COMPLIANCE OF WIRELESS COMMUNICATION DEVICES WITH THE BASIC RESTRICTIONS AND EXPOSURE LIMIT VALUES RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS IN THE FREQUENCY RANGE FROM 30 MHZ TO 6 GHZ: HAND-HELD AND BODY MOUNTED DEVICES IN CLOSE PROXIMITY TO THE HUMAN BODY
    BS EN 62493:2015 Assessment of lighting equipment related to human exposure to electromagnetic field
    BS EN 50383:2010 Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz)
    PREN 50527-2-1 : DRAFT 2015 PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE TO ELECTROMAGNETIC FIELDS OF WORKERS BEARING ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-1: SPECIFIC ASSESSMENT FOR WORKERS WITH CARDIAC PACEMAKERS
    EN 300 422-2 : 1.4.1 WIRELESS MICROPHONES; AUDIO PMSE UP TO 3 GHZ; PART 2: CLASS B RECEIVERS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU
    EN 300 422-1 : 1.5.1 WIRELESS MICROPHONES; AUDIO PMSE UP TO 3 GHZ; PART 1: CLASS A RECEIVERS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU
    EN 50383 : 2010 COR 2013 BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ)
    17/30353676 DC : 0 BS EN 50566 - PRODUCT STANDARD TO DEMONSTRATE THE COMPLIANCE OF WIRELESS COMMUNICATION DEVICES WITH THE BASIC RESTRICTIONS AND EXPOSURE LIMIT VALUES RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS IN THE FREQUENCY RANGE FROM 30 MHZ TO 6 GHZ: HAND-HELD AND BODY MOUNTED DEVICES IN CLOSE PROXIMITY TO THE HUMAN BODY
    BS EN 62232:2017 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure (IEC 62232:2017)
    15/30321270 DC : 0 BS EN 50527-2-1 - PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE TO ELECTROMAGNETIC FIELDS OF WORKERS BEARING ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-1: SPECIFIC ASSESSMENT FOR WORKERS WITH CARDIAC PACEMAKERS
    12/30258453 DC : 0 BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    UNE-EN 62493:2015 Assessment of lighting equipment related to human exposure to electromagnetic Field
    I.S. EN 50527-2-2:2018 PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE TO ELECTROMAGNETIC FIELDS OF WORKERS BEARING ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: SPECIFIC ASSESSMENT FOR WORKERS WITH CARDIOVERTER DEFIBRILLATORS (ICDS)
    UNE-EN 50566:2013 Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz)
    I.S. EN 50383:2010 BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ)
    09/30207082 DC : 0 BS EN 50383:2002/FPRAA - BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ)
    I.S. EN 62493:2015 ASSESSMENT OF LIGHTING EQUIPMENT RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS
    EN 50566:2017 Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    IEC 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz)
    IEC 62479:2010 Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
    ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    IEEE 1528-2013 REDLINE IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
    IEC 62311:2007 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
    ISO 10012:2003 Measurement management systems — Requirements for measurement processes and measuring equipment
    EN 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz)
    ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective