Skip to content
Please enter a keyword to search

  • EN 62262:2002

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

    Available format(s): 

    Superseded date:  03-11-2021

    Language(s): 

    Published date:  24-07-2002

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Definitions
    4 Designations
    5 General requirements for tests
    6 Test to verify the protection against mechanical
      impacts
    7 Test apparatus

    Abstract - (Show below) - (Hide below)

    Refers to the classification of the degrees of protection provided by enclosures against external mechanical impacts when the rated voltage of the protected equipment is not greater than 72,5 kV. This standard is only applicable to enclosures of equipment where the specific standard establishes degrees of protection of the enclosure against mechanical impacts (expressed in this standard as impacts).

    General Product Information - (Show below) - (Hide below)

    Committee CLC/SR 70
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    08/30180887 DC : DRAFT MAY 2008 BS EN 50131-4 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
    I.S. EN IEC 62828-1:2018 REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
    EN 62817:2015/A1:2017 PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION OF SOLAR TRACKERS (IEC 62817:2014/A1:2017)
    DIN EN 16252:2013-03 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
    UNE-EN 62817:2016 Photovoltaic systems - Design qualification of solar trackers
    12/30244749 DC : 0 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    BS EN 61969-3:2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS
    BS EN 50085-1 : 2005 CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    BS EN 62549:2011 Articulated systems and flexible systems for cable guiding
    09/30202532 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    BS EN 62820-1-1:2016 Building intercom systems System requirements. General
    CEI EN 62093 : 2005 BALANCE-OF-SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS
    HD 60364-7-708:2017 Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
    BS EN 16252:2012 Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements
    CEI EN 60670-24 : 2014 BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 24: PARTICULAR REQUIREMENTS FOR ENCLOSURES FOR HOUSING PROTECTIVE DEVICES AND OTHER POWER DISSIPATING ELECTRICAL EQUIPMENT
    S.R. HD 60364-7-708:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS, CAMPING PARKS AND SIMILAR LOCATIONS
    UNE-EN 50541-1:2012 Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements
    12/30244743 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    BS EN 50490:2008 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
    10/30218875 DC : 0 BS EN 50130-5:2010 - ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
    07/30162831 DC : 0 BS EN 13193 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - COLLATERAL STANDARD - FIREMAN'S SWITCHES FOR EXTERIOR AND INTERIOR SIGNS AND LUMINAIRES
    BS EN 62271-200:2012 High-voltage switchgear and controlgear AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    DIN EN 12405-3:2016-04 Gas meters - Conversion devices - Part 3: Flow computer
    EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    CEI EN 62549 : 2012 ARTICULATED SYSTEMS AND FLEXIBLE SYSTEMS FOR CABLE GUIDING
    I.S. EN 61969-3:2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS (IEC 61969-3:2011 (EQV))
    DIN EN 16486:2014-10 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    CEI EN 50085-2-4 : 2011 CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-4: PARTICULAR REQUIREMENTS FOR SERVICE POLES AND SERVICE POSTS
    S.R. HD 60364-5-51:2009 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
    I.S. EN 16500:2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    EN 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
    I.S. EN 50130-5:2011 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
    I.S. EN 62271-212:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 212: COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATION (CEADS)
    I.S. EN 62586-1:2017 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
    UNE-EN 16500:2015 Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
    S.R. HD 60364-7-709:2009 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS
    I.S. EN 50524:2009 DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS
    DIN EN 40-4:2006-06 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
    BS EN 40-4:2005 Lighting columns Requirements for reinforced and prestressed concrete lighting columns
    BS EN 13463-1:2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    UNE-EN 62271-212:2017 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
    I.S. EN 12629-4:2001 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 4: CONCRETE ROOF TILE MAKING MACHINES
    EN 60670-24:2013 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
    EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
    EN 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
    EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
    HD 60364-5-51:2009/A12:2017 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
    EN 50130-5:2011 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
    EN 12151:2007 Machinery and plants for the preparation of concrete and mortar - Safety requirements
    EN 50085-1 : 2005 AMD 1 2013 CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    EN 62271-201:2014 High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    EN 62271-212:2017 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
    EN 60839-11-1:2013/AC:2015 ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013)
    EN 62586-1:2017 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
    EN 50541-1:2011 Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements
    EN 62676-1-1:2014/AC:2014 VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL (IEC 62676-1-1:2013)
    EN 50131-10:2014 Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises Transceiver (SPT)
    EN 62271-202:2014/AC:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
    EN 62683:2015 Low-voltage switchgear and controlgear - Product data and properties for information exchange
    EN 50490:2008 Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps
    EN 60598-2-5:2015 Luminaires - Part 2-5: Particular requirements - Floodlights
    EN 50425:2008 Switches for household and similar fixed electrical installations - Collateral standard - Fireman's switches for exterior and interior signs and luminaires
    TS 102 872 : 1.1.1 ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); COPPER EXTERNAL NETWORK TESTING INTERFACE
    I.S. EN 16252:2012 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
    06/30127082 DC : 0 EN 50486 - EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR - ENTRY SYSTEMS
    DIN EN 15955-2:2013-09 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    UNI EN 16500 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    BS EN 50588-1:2017 MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS
    DIN EN 16486 E : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    BS EN 16500:2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    16/30299837 DC : 0 BS EN 50131-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES
    I.S. EN 62626-1:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ENCLOSED EQUIPMENT - PART 1: ENCLOSED SWITCH-DISCONNECTORS OUTSIDE THE SCOPE OF IEC 60947-3 TO PROVIDE ISOLATION DURING REPAIR AND MAINTENANCE WORK
    BS EN 50085-2-4:2009 Cable trunking systems and cable ducting systems for electrical installations Particular requirements for service poles and service posts
    NF EN 50130-5 : 2011 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
    BS EN 14033-3 : 2009 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
    I.S. EN 12151:2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    BS EN 50541-1:2011 Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3150 kVA, with highest voltage for equipment not exceeding 36 kV General requirements
    PREN 50131-6 : DRAFT 2016 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES
    BS EN 60598-2-5:2015 LUMINAIRES - PART 2-5: PARTICULAR REQUIREMENTS - FLOODLIGHTS
    11/30240323 DC : 0 BS EN 16252 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
    BS EN 62586-1:2017 Power quality measurement in power supply systems Power quality instruments (PQI)
    BS EN 61969-1:2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 1: DESIGN GUIDELINES
    12/30270038 DC : 0 BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    BS EN 50131-3:2009 Alarm systems. Intrusion and hold-up systems Control and indicating equipment
    07/30134620 DC : 0 BS EN 50131-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES
    BS EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
    BS EN 16486:2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    BS EN 62676-1-1:2014 Video surveillance systems for use in security applications System requirements. General
    I.S. EN IEC 62613-1:2018 PLUGS, SOCKET-OUTLETS AND SHIP COUPLERS FOR HIGH-VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) - PART 1: GENERAL REQUIREMENTS
    CEI EN 50486 : 2009 EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS
    I.S. EN 50085-2-4:2009 CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-4: PARTICULAR REQUIREMENTS FOR SERVICE POLES AND SERVICE POSTS
    I.S. EN 16486:2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    PREN 15746-2 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    BS EN 61010-1:2010+A1:2019 (published 2019-03) Safety requirements for electrical equipment for measurement, control, and laboratory use General requirements
    CEI EN 62864-1 : 1ED 2017 RAILWAY APPLICATIONS - ROLLING STOCK - POWER SUPPLY WITH ONBOARD ENERGY STORAGE SYSTEM - PART 1: SERIES HYBRID SYSTEM
    UNE-EN 12405-3:2016 Gas meters - Conversion devices - Part 3: Flow computer
    CEI EN 50490 : 2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
    UNE-EN 50131-10:2014 Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises Transceiver (SPT)
    UNI EN 16252 : 2013 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
    UNI EN 16486 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    I.S. EN 50588-1:2017 MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS
    I.S. EN 62676-1-1:2014 VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
    CEI EN 62208 : 2012 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    I.S. EN 50131-4:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
    I.S. EN 15746-2:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 62271-202:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
    I.S. EN 15955-2:2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    CEI EN 62271-201 : 2015 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 201: AC SOLID-INSULATION ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
    S.R. HD 60364-7-712:2016 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-712: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - PHOTOVOLTAIC (PV) SYSTEMS
    I.S. EN 62689-1:2016 CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
    UNE-EN 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
    CEI EN 50131-4 : 2010 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
    I.S. EN 14033-3:2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
    EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
    UNE-EN 62271-200:2012 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    EN 61969-3:2012 Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
    EN 16486:2014 Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements
    EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
    DIN EN 13463-1:2009-07 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    UNI EN 15746-2 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    CEI EN 62974-1 : 1ED 2017 MONITORING AND MEASURING SYSTEMS USED FOR DATA COLLECTION, GATHERING AND ANALYSIS - PART 1: DEVICE REQUIREMENTS
    17/30353695 DC : 0 BS EN 50131-4 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
    I.S. EN 13463-1:2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    EN IEC 62969-1:2018 Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors
    BS EN 50131-10:2014 (published 2014-08) Alarm systems. Intrusion and hold-up systems Application specific requirements for Supervised Premises Transceiver (SPT)
    PREN 50524 : DRAFT 2008 DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS
    UNE-EN 50490:2010 Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps
    BS EN 50486:2008 Equipment for use in audio and video door-entry systems
    12/30270562 DC : 0 BS EN 60670-24 - BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 24: PARTICULAR REQUIREMENTS FOR ENCLOSURES FOR HOUSING PROTECTIVE DEVICES AND OTHER POWER DISSIPATING ELECTRICAL EQUIPMENT
    HD 60364-7-709:2009/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS
    BS EN 50425:2008 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - COLLATERAL STANDARD - FIREMAN'S SWITCHES FOR EXTERIOR AND INTERIOR SIGNS AND LUMINAIRES
    BS EN 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
    NF EN 50541-1 : 2011 THREE PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 KVA TO 3150 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS
    CEI EN 50541-1 : 2011 THREE PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 KVA TO 3150 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS
    I.S. EN 60839-11-1:2013 ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS
    EN 62974-1:2017 Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
    UNE-EN 62549:2012 Articulated systems and flexible systems for cable guiding
    UNE-EN 62676-1-1:2015 Video surveillance systems for use in security applications - Part 1-1: System requirements - General
    EN 16252:2012 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
    NF EN 15746-2 : 2010 + A1 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    UNE-EN 62208:2012 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
    BS EN 61587-1:2017 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
    I.S. EN 62820-1-1:2016 BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
    I.S. EN 50131-3:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT
    I.S. EN 61869-1:2009 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 12405-3:2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    BS EN 62271-1:2017 High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear
    I.S. EN 60670-24:2013 BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 24: PARTICULAR REQUIREMENTS FOR ENCLOSURES FOR HOUSING PROTECTIVE DEVICES AND OTHER POWER DISSIPATING ELECTRICAL EQUIPMENT (IEC 60670-24:2011 (MOD))
    I.S. EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    I.S. EN 50541-1:2011 THREE PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 KVA TO 3150 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS
    PREN 50541-1 : DRAFT 2009 THREE PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 TO 3150 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS AND REQUIREMENTS FOR DRY TYPE TRANSFORMERS WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV
    I.S. EN 62271-200:2012 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011 (EQV))
    EN 62271-200:2012/AC:2015 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: AC METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011)
    I.S. EN 61010-1:2010/A1:2019 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    UNE-EN 62271-202:2015 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation
    UNE-EN 15954-2:2014 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
    UNE-EN 15955-2:2014 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
    BS EN 12151:2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    UNE-EN 61869-1:2010 Instrument transformers -- Part 1: General requirements
    UNE-EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements
    EN 61969-1:2012 Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines
    EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines
    EN 60839-11-1:2013/AC:2015 ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013)
    UNI EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    UNI EN 13463-1 : 2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    EN 50532:2010 Compact Equipment Assembly for Distribution Substations (CEADS)
    UNI EN 12629-4 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 4: CONCRETE ROOF TILE MAKING MACHINES
    UNI EN 15955-2 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    BS EN 60669-2-6:2012 Switches for household and similar fixed electrical installations Particular requirements. Fireman\'s switches for exterior and interior signs and luminaires
    09/30211604 DC : 0 BS EN 50541-1 - THREE PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 TO 3150 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS AND REQUIREMENTS FOR DRY TYPE TRANSFORMERS WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV
    I.S. HD 60364-7-708:2009 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS, CAMPING PARKS AND SIMILAR LOCATIONS
    08/30183361 DC : DRAFT JUNE 2008 BS EN 50524 - DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS
    EN 62689-1:2016 Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements
    BS EN 12405-3:2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    DD CLC/TS 50131-4:2006 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
    I.S. EN 50532:2010 COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATIONS (CEADS)
    CEI EN 60598-2-5 : 2016 LUMINAIRES - PART 2-5: PARTICULAR REQUIREMENTS - FLOODLIGHTS
    DIN EN 14033-3:2014-08 (Draft) RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
    ASTM F 3002 : 2014 Standard Specification for Design of the Command and Control System for Small Unmanned Aircraft Systems (sUAS)
    12/30268301 DC : 0 BS EN 16486 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    BS EN 62974-1:2017 Monitoring and measuring systems used for data collection, gathering and analysis Device requirements
    BS EN 60839-11-1:2013 Alarm and electronic security systems Electronic access control systems. System and components requirements
    CEI EN 50524 : 2010 DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS
    CEI EN 61969-3 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS
    PREN 50130-5 : DRAFT 2010 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
    BS EN 50524:2009 (published 2010-01) Data sheet and name plate for photovoltaic inverters
    BS EN 62689-1:2016 (published 2017-01) Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements
    DIN EN 12405-3 E : 2016 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    BS EN 62093:2005 Balance-of-system components for photovoltaic systems. Design qualification natural environments
    BS EN 50130-5:2011 Alarm systems Environmental test methods
    11/30245742 DC : 0 BS EN 50131-10 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 10: APPLICATION SPECIFIC REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT)
    DIN EN 16500:2014-10 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    UNE-EN 62974-1:2018 Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
    BS EN 15955-2:2013 Railway applications. Track. Demountable machines and associated equipment General safety requirements
    I.S. HD 60364-7-722:2012 LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLY OF ELECTRIC VEHICLE
    EN 50131-6:2017 Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies
    I.S. EN 60598-2-3:2005 LUMINAIRES - PART 2-3: PARTICULAR REQUIREMENTS - LUMINAIRES FOR ROAD AND STREET LIGHTING (IEC 60598-2-3:2002 (EQV))
    DIN EN 16500 E : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    BS EN 62817 : 2015 PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION OF SOLAR TRACKERS
    EN 50588-1:2017 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements
    I.S. EN 62864-1:2016 RAILWAY APPLICATIONS - ROLLING STOCK - POWER SUPPLY WITH ONBOARD ENERGY STORAGE SYSTEM - PART 1: SERIES HYBRID SYSTEM
    I.S. HD 60364-5-51:2009 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES (IEC 60364-5-51:2005 (MOD))
    I.S. EN 61969-1:2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 1: DESIGN GUIDELINES (IEC 61969-1:2011 (EQV))
    HD 60364-7-722:2016 Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles
    I.S. EN 15954-2:2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. CLC TS 50131-4:2006 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
    I.S. EN 62093:2005 BALANCE-OF-SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS
    BS EN 62683:2015 Low-voltage switchgear and controlgear. Product data and properties for information exchange
    I.S. EN 62817:2015 PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION OF SOLAR TRACKERS
    EN IEC 62828-1:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters
    UNE-EN 62864-1:2017 Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system
    I.S. EN 61010-1:2010 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    EN 50524:2009 Data sheet and name plate for photovoltaic inverters
    I.S. EN 62208:2011 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011)
    I.S. EN 50490:2008 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
    S.R. HD 60364-7-722:2016 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLIES FOR ELECTRIC VEHICLES
    BS EN 62271-212:2017 High-voltage switchgear and controlgear Compact Equipment Assembly for Distribution Substation (CEADS)
    BS EN 50532:2010 Compact equipment assembly for distribution substations (CEADS)
    UNE-EN 62271-201:2015 High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    09/30202403 DC : 0 BS EN 50532 - COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATIONS (CEADS)
    UNE-EN 50532:2011 Compact Equipment Assembly for Distribution Substations (CEADS)
    UNE-EN 13463-1:2011 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
    EN 60669-2-6:2012 Switches for household and similar fixed electrical installations - Part 2-6: Particular requirements - Fireman's switches for exterior and interior signs and luminaires
    EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    EN 40-4:2005/AC:2006 LIGHTING COLUMNS - PART 4: REQUIREMENTS FOR REINFORCED AND PRESTRESSED CONCRETE LIGHTING COLUMNS
    EN 15955-2 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    EN 16500:2014 Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
    EN 14033-3:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
    PREN 50131-10 : DRAFT 2011 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 10: APPLICATION SPECIFIC REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT)
    BS EN 61869-1:2009 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    CEI EN 61969-1 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 1: DESIGN GUIDELINES
    CEI EN 62586-1 : 2016 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
    CEI EN 50131-3 : 2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT
    BS EN 15954-2:2013 Railway applications. Track. Trailers and associated equipment General safety requirements
    UNE-EN 50130-5:2011 Alarm systems - Part 5: Environmental test methods
    BS EN 60670-24:2013 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
    CEI EN 62820-1-1 : 1ED 2017 BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
    14/30258503 DC : 0 BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
    I.S. EN 50131-10:2014 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 10: APPLICATION SPECIFIC REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT)
    BS EN 62271-201:2014 High-voltage switchgear and controlgear AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    DIN EN 15954-2:2013-11 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
    I.S. EN 50486:2008 EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS
    I.S. EN 62974-1:2017 MONITORING AND MEASURING SYSTEMS USED FOR DATA COLLECTION, GATHERING AND ANALYSIS - PART 1: DEVICE REQUIREMENTS
    PREN 60670-24 : DRAFT 2012 BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 24: PARTICULAR REQUIREMENTS FOR ENCLOSURES FOR HOUSING PROTECTIVE DEVICES AND OTHER POWER DISSIPATING ELECTRICAL EQUIPMENT (IEC 60670-24:2011, MODIFIED)
    DIN EN 15746-2:2016-02 (Draft) Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015
    UNE-EN 50131-4:2010 Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices
    07/30169926 DC : DRAFT AUG 2007 BS EN 50490 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
    CEI EN 50130-5 : 2012 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
    EN IEC 62613-1:2018 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements
    PREN 50131-4 : DRAFT 2017 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
    CEI EN 61869-1 : 2010 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    CEI EN 60669-2-6 : 2012 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-6: PARTICULAR REQUIREMENTS - FIREMAN'S SWITCHES FOR EXTERIOR AND INTERIOR SIGNS AND LUMINAIRES
    UNE-EN 16252:2013 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
    I.S. HD 60364-7-709:2009 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS (IEC 60364-7-709:2007 (MOD))
    I.S. EN 50425:2008 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - COLLATERAL STANDARD - FIREMAN'S SWITCHES FOR EXTERIOR AND INTERIOR SIGNS AND LUMINAIRES
    UNE-EN 50524:2010 Data sheet and name plate for photovoltaic inverters
    I.S. EN 60669-2-6:2012 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-6: PARTICULAR REQUIREMENTS - FIREMAN'S SWITCHES FOR EXTERIOR AND INTERIOR SIGNS AND LUMINAIRES (IEC 60669-2-6:2012 (MOD))
    CEI EN 62676-1-1 : 2014 VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
    I.S. EN 60598-2-5:2015 LUMINAIRES - PART 2-5: PARTICULAR REQUIREMENTS - FLOODLIGHTS
    BS EN 15746-2 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    BS EN 50131-4:2009 Alarm systems. Intrusion and hold-up systems Warning devices
    15/30279801 DC : 0 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 50131-6:2017 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES
    I.S. EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
    I.S. EN 50085-1:2005 CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 62271-201:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 201: AC SOLID-INSULATION ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
    UNE-EN 61439-1:2012 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    BS EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies General rules
    BS EN 12629-4 : 2001 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 4: CONCRETE ROOF TILE MAKING MACHINES
    BS EN 62271-202:2014 High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation
    EN 50131-3:2009 Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment
    EN 61869-1:2009 Instrument transformers - Part 1: General requirements
    HD 60364-7-712:2016 Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems
    EN 50085-2-4:2009 Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements for service poles and service posts
    EN 12405-3 : 2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    EN 62864-1:2016 Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system
    EN 62093:2005 Balance-of-system components for photovoltaic systems - Design qualification natural environments
    EN 50486:2008 Equipment for use in audio and video door-entry systems
    DIN EN 12151:2008-05 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    CLC/TS 50131-4:2006 Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices
    DIN EN 15746-2:2011-12 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011)
    EN 50131-4:2009 Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices
    EN 62549:2011 Articulated systems and flexible systems for cable guiding
    EN 60598-2-3:2003/A1:2011 LUMINAIRES - PART 2-3: PARTICULAR REQUIREMENTS - LUMINAIRES FOR ROAD AND STREET LIGHTING (IEC 60598-2-3:2002/A1:2011)

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    EN 60068-1:2014 Environmental testing - Part 1: General and guidance
    HD 323.1 : 200S2 BASIC ENVIRONMENTAL TESTING PROCEDURES - GENERAL AND GUIDANCE
    IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
    IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective