EN 771-6:2011+A1:2015
Current
The latest, up-to-date edition.
Specification for masonry units - Part 6: Natural stone masonry units
19-08-2015
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials of natural stone
5 Requirements for natural stone masonry units
6 Description, designation and classification of
natural stone masonry units
7 Marking
8 Assessment and verification of constancy of
performance (AVCP)
Annex A (normative) - Sampling for type testing
and for independent testing of consignment
Annex B (informative) - Guidance for test frequencies
for designing a FPC system to demonstrate conformity
of finished products with the requirements of
the standard and the declaration of the manufacturer
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Regulation
Bibliography
This European Standard specifies the characteristics and performance requirements of masonry units manufactured from natural stone the width of which is equal to or greater than 80 mm, for which the main intended uses are common, facing or exposed masonry units in loadbearing or non-loadbearing building and civil engineering applications These units are suitable for all forms of coursed or random masonry walling, including single leaf, cavity, partition, retaining and the external masonry to chimneys. They can provide fire protection, thermal insulation, sound insulation and sound absorption.This European Standard includes natural stone masonry units of an overall non-rectangular parallelepiped shape, specially shaped and accessory units for internal and external application.It defines the performance related to e.g. strength, petrographic description, density, porosity, dimensional accuracy, thermal conductivity, water absorption, and frost resistance and provides for the !assessment and verification of constancy of performance (AVCP)" of the product to this European Standard. The marking requirements for products covered by this European Standard are also included.This European Standard does not cover storey height panels, natural stone for paving, chimney flue linings nor units intended for use as damp proof course.
Committee |
CEN/TC 125
|
DevelopmentNote |
Supersedes PREN 771-6. (08/2011) 2011 Edition Re-Issued in August 2015 & incorporates AMD 1 2015. (09/2015)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-EN 771-6:2012 | Identical |
NBN EN 771-6 : 2011 + A1 2015 | Identical |
NEN EN 771-6 : 2011 + A1 2015 | Identical |
NF EN 771-6 : 2011 + A1 2015 | Identical |
I.S. EN 771-6:2011 | Identical |
NS EN 771-6 : 2011 + A1 2015 | Identical |
PN-EN 771-6 + A1: 2015-10 | Identical |
I.S. EN 771-6:2011+A1:2015 | Identical |
DIN EN 771-6:2015-11 | Identical |
SN EN 771-6 : 2011 + A1 2015 | Identical |
UNI EN 771-6 : 2011 | Identical |
BS EN 771-6 : 2011 | Identical |
UNE-EN 771-6:2012+A1:2016 | Identical |
BS EN 771-6:2011+A1:2015 | Identical |
I.S. EN 1996-1-2:2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX) |
CEN/TR 16886:2016 | Guidance on the application of statistical methods for determining the properties of masonry products |
BS EN 12059 : 2008 | NATURAL STONE PRODUCTS - DIMENSIONAL STONE WORK - REQUIREMENTS |
10/30212126 DC : 0 | BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
S.R. CEN/TR 17024:2017 | NATURAL STONES - GUIDANCE FOR USE OF NATURAL STONES |
DIN EN 1469:2015-05 | NATURAL STONE PRODUCTS - SLABS FOR CLADDING - REQUIREMENTS |
DIN EN 1996-1-2:2011-04 | Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2010) |
BS EN 1015-9:1999 | Methods of test for mortar for masonry Determination of workable life and correction time of fresh mortar |
BS EN 846-8:2000 | Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of joist hangers |
CEN/TR 17024:2017 | Natural stones - Guidance for use of natural stones |
EN 12057:2015 | Natural stone products - Modular tiles - Requirements |
EN 12059:2008+A1:2011 | Natural stone products - Dimensional stone work - Requirements |
DIN EN 772-21:2011-07 | Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption |
10/30215389 DC : 0 | BS EN 772-21 - METHODS OF TEST FOR MASONRY UNITS - PART 21: DETERMINATION OF WATER ABSORPTION OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY COLD WATER ABSORPTION |
PREN 772-16 : DRAFT 2010 | METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF DIMENSIONS |
UNI EN 15080-12 : 2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS |
I.S. EN 15080-12:2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS |
UNI EN 772-21 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 21: DETERMINATION OF WATER ABSORPTION OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY COLD WATER ABSORPTION |
DIN EN 12059:2012-03 | NATURAL STONE PRODUCTS - DIMENSIONAL STONE WORK - REQUIREMENTS |
NF EN 772-21 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 21: DETERMINATION OF WATER ABSORPTION OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY COLD WATER ABSORPTION |
UNE-EN 15080-12:2011 | Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls |
DIN EN 772-11:2011-07 | Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
DIN EN 12058:2015-05 | NATURAL STONE PRODUCTS - SLABS FOR FLOORS AND STAIRS - REQUIREMENTS |
DIN EN 12057:2015-05 | NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS |
DIN EN 772-16:2011-07 | Methods of test for masonry units - Part 16: Determination of dimensions |
BS EN 772-1 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
BS EN 12057:2015 | Natural stone products. Modular tiles. Requirements |
I.S. EN 772-1:2011 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
I.S. EN 12057:2015 | NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS |
I.S. EN 12058:2015 | NATURAL STONE PRODUCTS - SLABS FOR FLOORS AND STAIRS - REQUIREMENTS |
I.S. EN 772-16:2011 | METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF DIMENSIONS |
DIN EN 1996-1-1:2013-02 | Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (includes Amendment 1:2012) |
I.S. EN 846-7:2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
DIN EN 772-1:2000-09 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
I.S. EN 772-11:2011 | METHODS OF TEST FOR MASONRY UNITS - PART 11: DETERMINATION OF WATER ABSORPTION OF AGGREGATE CONCRETE, AUTOCLAVED AERATED CONCRETE, MANUFACTURED STONE AND NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS |
I.S. EN 846-5:2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
I.S. EN 846-6:2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 6 - DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (SINGLE END TEST) |
I.S. EN 1469:2015 | NATURAL STONE PRODUCTS - SLABS FOR CLADDING - REQUIREMENTS |
DIN EN 1015-9:2007-05 | Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar (includes Amendment A1:2006) |
I.S. EN 1996-1-1:2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
I.S. EN 1996-3:2006 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
UNE-EN 1996-1-2:2011 | Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design |
10/30215383 DC : 0 | BS EN 772-16 - METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF DIMENSIONS |
PD CEN/TR 17024:2017 | Natural stones. Guidance for use of natural stones |
DIN EN 15080-12:2011-04 | Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls |
I.S. EN 772-21:2011 | METHODS OF TEST FOR MASONRY UNITS - PART 21: DETERMINATION OF WATER ABSORPTION OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY COLD WATER ABSORPTION |
PREN 772-11 : DRAFT 2010 | METHODS OF TEST FOR MASONRY UNITS - PART 11: DETERMINATION OF WATER ABSORPTION OF AGGREGATE CONCRETE, AUTOCLAVED AERATED CONCRETE, MANUFACTURED STONE AND NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS |
DIN EN 1996-3:2010-12 | Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (includes Corrigendum AC:2009) |
BS EN 772-20:2000 | Methods of test for masonry units Determination of flatness of faces of masonry units |
UNE-EN 846-5:2013 | Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
UNE-EN 1469:2015 | Natural stone products - Slabs for cladding - Requirements |
EN 846-6:2012 | Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) |
UNI EN 846-7 : 2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
UNI EN 846-6 : 2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 6: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (SINGLE END TEST) |
UNI EN 846-5 : 2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
UNI EN 1996-1-2 : 2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
UNI EN 772-11 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 11: DETERMINATION OF WATER ABSORPTION OF AGGREGATE CONCRETE, AUTOCLAVED AERATED CONCRETE, MANUFACTURED STONE AND NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS |
UNI EN 1996-1-1 : 2013 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
UNI EN 772-16 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF DIMENSIONS |
BS EN 772-21:2011 | Methods of test for masonry units Determination of water absorption of clay and calcium silicate masonry units by cold water absorption |
10/30215380 DC : 0 | BS EN 772-11 - METHODS OF TEST FOR MASONRY UNITS - PART 11: DETERMINATION OF WATER ABSORPTION OF AGGREGATE CONCRETE, AUTOCLAVED AERATED CONCRETE, MANUFACTURED STONE AND NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS |
07/30172842 DC : 0 | BS EN 15080-12 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS |
06/30153245 DC : DRAFT JULY 2006 | EN 12059 - NATURAL STONE PRODUCTS - DIMENS - NATURAL STONE PRODUCTS - DIMENSIONAL STONE WORK-REQUIREMENTS |
S.R. CEN/TR 16886:2016 | GUIDANCE ON THE APPLICATION OF STATISTICAL METHODS FOR DETERMINING THE PROPERTIES OF MASONRY PRODUCTS |
I.S. EN 12059:2008 | NATURAL STONE PRODUCTS - DIMENSIONAL STONE WORK - REQUIREMENTS |
BS EN 1996-1-2:2005 | Eurocode 6. Design of masonry structures General rules. Structural fire design |
UNE-EN 12059:2008 | Natural stone products - Dimensional stone work - Requirements |
UNE-EN 846-6:2015 | Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) |
UNE-EN 12058:2015 | Natural stone products - Slabs for floors and stairs - Requirements |
BS EN 846-5:2012 | Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
BS EN 1996-1-1 : 2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
BS EN 846-6:2012 | Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) |
UNE-EN 12057:2015 | Natural stone products - Modular tiles - Requirements |
BS EN 846-7:2012 | Methods of test for ancillary components for masonry Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
UNE-EN 846-7:2015 | Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
BS EN 772-16:2011 | Methods of test for masonry units Determination of dimensions |
EN 772-1:2011+A1:2015 | Methods of test for masonry units - Part 1: Determination of compressive strength |
EN 772-16:2011 | Methods of test for masonry units - Part 16: Determination of dimensions |
EN 846-7:2012 | Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
EN 1996-1-1:2005+A1:2012 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
EN 1469:2015 | Natural stone products - Slabs for cladding - Requirements |
EN 772-21:2011 | Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption |
EN 846-5:2012 | Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
EN 772-11:2011 | Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
EN 15080-12:2011 | Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls |
BS EN 15080-12:2011 | Extended application of results from fire resistance tests Loadbearing masonry walls |
PD CEN/TR 16886:2016 | Guidance on the application of statistical methods for determining the properties of masonry products |
UNE-EN 1996-1-1:2011 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
UNI EN 12059 : 2012 | NATURAL STONE PRODUCTS - DIMENSIONAL STONE WORK - REQUIREMENTS |
DIN EN 772-1:2016-05 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
BS EN 1469:2015 | Natural stone products. Slabs for cladding. Requirements |
BS EN 772-11:2000 | Methods of test for masonry units Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
BS EN 1996-3:2006 | Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures |
BS EN 12058:2015 | Natural stone products. Slabs for floors and stairs. Requirements |
EN 12058:2015 | Natural stone products - Slabs for floors and stairs - Requirements |
DIN EN 846-7:2012-11 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
DIN EN 846-5:2012-11 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
DIN EN 846-6:2012-11 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 6: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (SINGLE END TEST) |
UNE-EN 772-1:2011 | Methods of test for masonry units - Part 1: Determination of compressive strength |
EN 771-3:2011+A1:2015 | Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates) |
EN 998-2:2016 | Specification for mortar for masonry - Part 2: Masonry mortar |
EN 771-4:2011+A1:2015 | Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units |
EN 1936:2006 | Natural stone test methods - Determination of real density and apparent density, and of total and open porosity |
ISO 12491:1997 | Statistical methods for quality control of building materials and components |
EN 13373:2003 | Natural stone test methods - Determination of geometric characteristics on units |
EN 772-1:2011+A1:2015 | Methods of test for masonry units - Part 1: Determination of compressive strength |
EN 1745:2012 | Masonry and masonry products - Methods for determining thermal properties |
EN 12371:2010 | Natural stone test methods - Determination of frost resistance |
EN 12407:2007 | Natural stone test methods - Petrographic examination |
ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
EN 772-16:2011 | Methods of test for masonry units - Part 16: Determination of dimensions |
EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
EN 1996-1-1:2005+A1:2012 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
EN 12440:2017 | Natural stone - Denomination criteria |
ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
EN 771-1:2011+A1:2015 | Specification for masonry units - Part 1: Clay masonry units |
EN 12372:2006 | Natural stone test methods - Determination of flexural strength under concentrated load |
EN 772-11:2011 | Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
EN 771-5:2011+A1:2015 | Specification for masonry units - Part 5: Manufactured stone masonry units |
EN 771-2:2011+A1:2015 | Specification for masonry units - Part 2: Calcium silicate masonry units |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.