EN 976-1:1997

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks

Available format(s):

Withdrawn date: 20-04-2022

Language(s):

Published date: 23-07-1997

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

1 Scope
2 Normative references
3 Materials
    3.1 General
    3.2 Resins
    3.3 Reinforcement materials
    3.4 Processing agents
    3.5 Fillers
    3.6 Additives
    3.7 Structural core
    3.8 Rib core
4 Tank construction
    4.1 General
    4.2 Cylinder wall and tank end build-up
    4.3 Jointing of cylinder walls and/or tank ends
    4.4 Tank ends
    4.5 Manways
    4.6 Connected pipes and their fittings
    4.7 Lifting devices
    4.8 Anchoring devices
    4.9 Static charge dissipation
5 Requirements
    5.1 Appearance
    5.2 Dimensions
    5.3 Leaktightness
    5.4 Bending and torsion moments on fittings
    5.5 Internal impact resistance
    5.6 External impact resistance
    5.7 Lifting system loading
    5.8 Structural stability
    5.9 Laminate requirements
    5.10 Structural core properties
6 Test methods
    6.1 General
    6.2 Dimensions
    6.3 Leaktightness
    6.4 Bending and torsion moments on fittings
    6.5 Internal impact resistance
    6.6 External impact resistance
    6.7 Lifting system loading
    6.8 Negative pressure test
    6.9 Tests on laminate
    6.10 Structural core properties
7 Marking
Annexes
A (informative) A-deviations

Abstract - (Show below) - (Hide below)

This Part 1 of European Standard EN 976 specifies the requirements and associated test methods for horizontal, cylindrical single walls tanks made of glass reinforced thermosetting resins (hereafter called tanks), and for their accessories, used for the underground non-pressure storage of liquid petroleum based fuels. The tanks specified by this European Standard are tanks with one or more compartments and with or without the possibility of leak detection.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 210
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Withdrawn

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NBN EN 976-1 : 1997	Identical
NF EN 19976-1 : 1997	Identical
NS EN 976-1 : 1ED 1997	Identical
UNI EN 976-1 : 1999	Identical
DIN EN 976-1:1997-09	Identical
BS EN 976-1:1997	Identical
I.S. EN 976-1:1998	Identical
SN EN 976-1 : 1998	Identical
NEN EN 976-1 : 1997	Identical
PN EN 976-1 : 2002	Identical
UNE-EN 976-1:1998	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

11/30238497 DC : 0	BS EN 13160-5 - LEAK DETECTION SYSTEMS - PART 5: TANK GAUGE LEAK DETECTION SYSTEMS
16/30329416 DC : 0	BS EN 12566-3 - SMALL WASTEWATER TREATMENT SYSTEMS UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS
PREN 13012 : DRAFT 2010	PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
I.S. EN 12566-3:2016	SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS
BS EN 13617-3:2012	Petrol filling stations Safety requirements for construction and performance of shear valves
EN 12566-3:2016	Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
EN 13012:2012	Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
DIN EN 13617-3:2012-05	Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves
I.S. EN 13012:2012	PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
I.S. EN 13160-5:2016	LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS
DIN EN 858-1:2002-05	CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
I.S. EN 13617-3:2012	PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES
10/30219402 DC : 0	BS EN 13012 - PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
14/30301263 DC : 0	BS EN 13160-5 - LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS
PREN 13617-3 : DRAFT 2010	PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES
PREN 13160-5 : DRAFT 2014	LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS
EN 13617-3:2012	Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves
BS EN 13012:2012	Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers
UNE-EN 13617-3:2012	Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves
10/30219411 DC : 0	BS EN 13617-3 - PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES
00/715014 DC : DRAFT OCT 2000	PREN 13617-3 - PETROL FILLING STATIONS - PART 3: CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES
DIN EN 13012:2012-09	Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
BS EN 13160-5:2004	Leak detection systems Tank gauge leak detection systems
UNE-EN 12566-3:2017	Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
BS EN 12566-3 : 2005	SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS
UNE-EN 13012:2012	Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
EN 858-1:2002/A1:2004	SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
UNI EN 13012 : 2012	PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
UNI EN 13617-3 : 2012	PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES
EN 976-2:1997	Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks
EN 1825-1:2004/AC:2006	GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
BS EN 1825-1:2004	Grease separators Principles of design, performance and testing, marking and quality control
UNE-EN 13160-5:2017	Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
BS EN 858-1:2002	Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control
EN 13160-5:2016	Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
DIN EN 1825-1:2004-12	Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004

Standards Referencing This Book - (Show below) - (Hide below)

ISO 1922:2012	Rigid cellular plastics Determination of shear strength
EN 978:1997	Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta
EN 63 : 1977	GLASS REINFORCED PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES - THREE POINT METHOD
EN 61 : 1977	GLASS REINFORCED PLASTICS - DETERMINATION OF TENSILE PROPERTIES
EN 977:1997	Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids
EN 637:1994/AC:1995	PLASTICS PIPING SYSTEMS - GLASS REINFORCED PLASTICS COMPONENTS - DETERMINATION OF THE AMOUNTS OF CONSTITUENTS USING THE GRAVIMETRIC METHOD
ISO 844:2014	Rigid cellular plastics Determination of compression properties

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart