EN ISO 11205:2009
Current
The latest, up-to-date edition.
Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
12-08-2009
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Measurement uncertainty
5 Principle
6 Instrumentation
6.1 General
6.2 Calibration
7 Installation and operation of the source
7.1 General
7.2 Location of the machine
7.3 Mounting of the machine
7.4 Auxiliary equipment
7.5 Operation of the machine under test
8 Test procedure
8.1 Applicability
8.2 Measurement time interval
8.3 Measurements
8.4 Wind and gas flows
8.5 Criteria for qualification of the measurement
8.6 Criterion for background noise
8.7 Frequency range of measurements
8.8 Evaluation of the measurement result
9 Information to be recorded
9.1 General
9.2 Machine under test
9.3 Test conditions
9.4 Acoustic environment
9.5 Instrumentation
9.6 Location of specified positions
9.7 Noise data
10 Information to be reported
Annex A (normative) Criterion for the adequacy of the
direction of the sound intensity vector
Annex B (normative) Procedure for frequencies higher
than 5000 Hz
Annex C (normative) Procedure in case the measurement
fails to qualify
Annex D (informative) Example of a test table
Bibliography
Annex ZA (informative) Relationship between this European Standard
and the Essential Requirements of EU Directive 98/37/EC
Annex ZB (informative) Relationship between this European Standard
and the Essential Requirements of EU Directive 2006/42/EC
ISO 11205:2003 specifies an engineering method (grade 2 accuracy) to determine the emission sound pressure level of machines in situ, at the work station or at other specified positions, using sound intensity. It is an alternative to ISO 11201, ISO 11202 and ISO 11204 for in situ measurements. It is applicable to all kinds of test environments provided that the requirements on background noise and field indicators are fulfilled. ISO 11205:2003 is applicable to equipment emitting stationary broadband noise. The noise can differ between operational cycles and can be with or without discrete frequency or narrow band components.
| Committee |
CEN/TC 211
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 11205 : 2009 | Identical |
| NBN EN ISO 11205 : 2009 | Identical |
| I.S. EN ISO 11205:2009 | Identical |
| ISO 11205:2003 | Identical |
| UNI EN ISO 11205 : 2009 | Identical |
| BS EN ISO 11205:2009 | Identical |
| DIN EN ISO 11205:2009-12 | Identical |
| NEN EN ISO 11205 : 2009 | Identical |
| UNE-EN ISO 11205:2010 | Identical |
| NS EN ISO 11205 : 2009 | Identical |
| SN EN ISO 11205 : 2010 | Identical |
| PN EN ISO 11205 : 2010 | Identical |
| CSA Z107.58 : 2015 | NOISE EMISSION DECLARATIONS FOR MACHINERY |
| 10/30195968 DC : 0 | BS ISO 18738-2 - MEASUREMENT OF RIDE QUALITY - PART 2: ESCALATORS AND MOVING WALKS |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| ISO 11200:2014 | Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| ISO 12001:1996 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| IEC 61043:1993 | Electroacoustics - Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| ISO 7574-1:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.