EN ISO 11296-7:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011)
22-02-2019
20-02-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Pipes at the 'M' stage
6 Fittings at the 'M' stage
7 Ancillary components
8 Fitness for purpose of the installed lining
system at the 'I' stage
9 Installation practice
Annex A (normative) - Spirally-wound pipe - Test
method for watertightness in a deflected
condition
Annex B (informative) - Examples of methods
for reconnecting and sealing laterals to
SWO pipe
Bibliography
This part of ISO 11296, in conjunction with Part 1, specifies requirements and test methods for pipes which areformed on site by spirally winding and jointing a pre-manufactured profiled plastics strip, or a profiled plasticsstrip and integral locking joiner strip, and used for the renovation of underground non-pressure drainage andsewerage networks.It applies to spirally-wound pipes of fixed or variable diameter installed by one of two methods.The first method employs a dedicated winding machine in front of the open end of an existing pipeline, e.g. ina manhole. The pipes thus formed are simultaneously inserted into the existing pipeline by the winding forces,and by certain techniques can also be expanded in diameter after or during insertion.The second method employs a dedicated winding machine which forms the pipe as it traverses the existingpipeline from one manhole to the next.It covers spirally-wound pipes of fixed or variable diameter made of profiled plastics strips, with or withoutsteel stiffening elements, of unplasticized poly(vinyl chloride) (PVC‑U) with integral locking mechanism or highdensity polyethylene (HDPE) with integrally welded joints.
Committee |
CEN/TC 155
|
DevelopmentNote |
Supersedes PREN ISO 11296-7 & EN 13566-7. (03/2013)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NEN EN ISO 11296-7 : 2013 | Identical |
UNE-EN ISO 11296-7:2014 | Identical |
ISO 11296-7:2019 | Identical |
UNI EN ISO 11296-7 : 2013 | Identical |
NF EN ISO 11296-7 : 2013 | Identical |
SN EN ISO 11296-7 : 2013 | Identical |
ONORM EN ISO 11296-7 : 2013 | Identical |
BS EN ISO 11296-7:2013 | Identical |
PN EN ISO 11296-7 : 2013 | Identical |
I.S. EN ISO 11296-7:2019 | Identical |
ISO 11296-7:2011 | Identical |
BS EN ISO 11296-7:2019 | Identical |
NS EN ISO 11296-7 : 2013 | Identical |
UNI EN ISO 11296-7 : 2019 | Identical |
NEN-EN-ISO 11296-7:2019 | Identical |
I.S. EN ISO 11296-7:2013 | Identical |
NBN EN ISO 11296-7 : 2013 | Identical |
PN-EN ISO 11296-7:2019 | Identical |
DIN EN ISO 11296-7:2013-05 | Identical |
BS EN 16506:2014 | Systems for renovation of drains and sewers. Lining with a rigidly anchored plastics inner layer (RAPL) |
DIN EN 16506:2014-12 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
PREN 15885 : DRAFT 2015 | CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION, REPAIR AND REPLACEMENT OF DRAINS AND SEWERS |
UNI EN 16506 : 2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
16/30332542 DC : 0 | BS EN 15885 - CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION, REPAIR AND REPLACEMENT OF DRAINS AND SEWERS |
EN 16506:2014 | Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
UNE-EN 16506:2015 | Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
I.S. EN 16506:2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
ISO 11295:2017 | Classification and information on design and applications of plastics piping systems used for renovation and replacement |
ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
ISO 11296-1:2009 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 1: General |
ISO 6259-1:2015 | Thermoplastics pipes Determination of tensile properties Part 1: General test method |
EN 1979:1999 | Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam |
ISO 11296-4:2009 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 4: Lining with cured-in-place pipes |
ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
ISO 4435:2003 | Plastics piping systems for non-pressure underground drainage and sewerage Unplasticized poly(vinyl chloride) (PVC-U) |
ISO 9967:2016 | Thermoplastics pipes Determination of creep ratio |
ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
EN 14364:2013 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
ISO 9969:2016 | Thermoplastics pipes Determination of ring stiffness |
ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.