EN ISO 11733:2004

Foreword
1 Scope
2 Normative references
3 Definitions
4 Principle
5 Test environment
6 Reagents and materials
7 Apparatus
8 Procedure
   8.1 General
   8.2 Preparation of the inoculum
   8.3 Performance of the test
9 Calculation and expression of results
   9.1 Calculation of the degree of elimination
   9.2 Expression of results
   9.3 Indication of biodegradation
   9.4 Biodegradation of the organic medium
10 Validity of the test
11 Test report
Annex A (informative) Modification of the activated sludge
                      simulation test for nitrifying-denitrifying
                      sewage treatment plants
Annex B (informative) Coupling of the test units (optional)
Annex C (informative) Test systems
Annex D (informative) Effects of sludge retention time on effluent
                      concentration
Annex E (informative) Example of an elimination/degradation curve
Bibliography

ISO 11733:2004 specifies a method for the determination of the elimination and the biodegradability of organic compounds by aerobic micro-organisms. The conditions described simulate a wastewater treatment plant. Two test systems can be used: activated sludge plants or porous pots. The tests can optionally be performed under conditions of nitrification and denitrification and coupling of the units.The method applies to organic compounds which, under the conditions of the test, aresoluble in tap water at the test concentration and not expected to be transformed to insoluble metabolites if biodegradation, in addition to elimination, is determined;poorly water-soluble, but which are satisfactorily dispersible in water and allow detection with suitable analytical means (e.g. organic carbon measurements);non-volatile, or which have a negligible vapour pressure under the test conditions;not inhibitory to the test micro-organisms at the concentration chosen for the test. Compounds inhibitory at concentrations used in this test may be tested at concentrations less than their EC20 value, followed by higher practical concentrations after a period of acclimatization.The method can also be used to measure the biodegradation and elimination of dissolved organic compounds in waste water (also called "test compound" in the method).