IEC 60243-1:2013
|
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
EN ISO 14527-1 : 1999
|
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999) |
ISO 6603-2:2000
|
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing |
EN ISO 62:2008
|
Plastics - Determination of water absorption (ISO 62:2008) |
EN ISO 1183-3 : 1999
|
PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD |
EN ISO 8256:2004
|
Plastics - Determination of tensile-impact strength (ISO 8256:2004) |
ISO 3671:1976
|
Plastics — Aminoplastic moulding materials — Determination of volatile matter |
ISO 3167:2014
|
Plastics Multipurpose test specimens |
IEC 60250:1969
|
Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
EN ISO 60:1999
|
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977) |
ISO 171:1980
|
Plastics — Determination of bulk factor of moulding materials |
ISO 2112:1990
|
Plastics Aminoplastic moulding materials Specification |
EN ISO 527-2:2012
|
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
EN ISO 120 : 1998
|
PLASTICS - PHENOL-FORMALDEHYDE MOULDINGS - DETERMINATION OF FREE AMMONIA AND AMMONIUM COMPOUNDS - COLORIMETRIC COMPARISON METHOD |
ISO 120:1977
|
Plastics Phenol-formaldehyde mouldings Determination of free ammonia and ammonium compounds Colorimetric comparison method |
EN ISO 4614 : 1999
|
PLASTICS - MELAMINE-FORMALDEHYDE MOULDINGS -DETERMINATION OF EXTRACTABLE FORMALDEHYDE |
ISO 295:2004
|
Plastics — Compression moulding of test specimens of thermosetting materials |
ISO 10350-1:2017
|
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials |
ISO 2039-1:2001
|
Plastics Determination of hardness Part 1: Ball indentation method |
ISO 10724-1:1998
|
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens |
EN ISO 14527-3 : 1999
|
PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS (ISO 14527-3:1999) |
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
ISO 8256:2004
|
Plastics — Determination of tensile-impact strength |
ISO 11359-2:1999
|
Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
ISO 60:1977
|
Plastics — Determination of apparent density of material that can be poured from a specified funnel |
EN ISO 2818:1996
|
PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING |
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
ISO 75-2:2013
|
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
IEC 60167:1964
|
Methods of test for the determination of the insulation resistance of solid insulating materials |
EN ISO 75-2:2013
|
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
ISO 1183:1987
|
Plastics Methods for determining the density and relative density of non-cellular plastics |
IEC 60296:2012 RLV
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
EN ISO 3167:2014
|
Plastics - Multipurpose test specimens (ISO 3167:2014) |
IEC 60707:1999
|
Flammability of solid non-metallic materials when exposed to flame sources - List of test methods |
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
ISO 472:2013
|
Plastics Vocabulary |
ISO 2577:2007
|
Plastics Thermosetting moulding materials Determination of shrinkage |
EN ISO 2039-1 : 2003
|
PLASTICS - DETERMINATION OF HARDNESS - PART 1: BALL INDENTATION METHOD (ISO 2039-1:2001) |
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
EN ISO 295 : 2004
|
PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOSETTING MATERIALS |
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
EN ISO 6603-2:2000
|
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000) |
ISO 179-1:2010
|
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
EN ISO 4589-2:2017
|
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
ISO 62:2008
|
Plastics Determination of water absorption |
ISO 7808:1992
|
Plastics — Thermosetting moulding materials — Determination of transfer flow |
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
ISO 14527-3:1999
|
Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 3: Requirements for selected moulding compounds |
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
ISO 2818:1994
|
Plastics — Preparation of test specimens by machining |
ISO 14527-1:1999
|
Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 1: Designation system and basis for specifications |
ISO 899-1:2017
|
Plastics — Determination of creep behaviour — Part 1: Tensile creep |
EN ISO 3671:1998
|
Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976) |
ISO 4614:1977
|
Plastics Melamine-formaldehyde mouldings Determination of extractable formaldehyde |
ISO 178:2010
|
Plastics Determination of flexural properties |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
EN ISO 7808 : 1998
|
PLASTICS - THERMOSETTING MOULDING MATERIALS - DETERMINATION OF TRANSFER FLOW (ISO 7808:1992) |
ISO 10724-2:1998
|
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates |