17/30346738 DC : 0
|
BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
PREN 12493 : DRAFT 2013
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
PREN 10207 : DRAFT 2015
|
STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
15/30317351 DC : 0
|
BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
16/30332611 DC : DRAFT JAN 2016
|
BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
BS EN 16767:2016
|
Industrial valves. Steel and cast iron check valves |
11/30254168 DC : 0
|
BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DIN EN 15551 E : 2011
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
UNE-EN 16767:2017
|
Industrial valves - Steel and cast iron check valves |
16/30322067 DC : 0
|
BS EN 13001-3-1:2012 AMD 2 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
BS EN 1562:2012
|
Founding. Malleable cast irons |
14/30301577 DC : 0
|
BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
12/30250279 DC : 0
|
BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
PREN 10225-4 : DRAFT 2017
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
BS EN 1563:2011
|
Founding. Spheroidal graphite cast irons |
PREN 50405 : DRAFT 2014
|
RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CARBON CONTACT STRIPS |
VDMA 24408 : DRAFT 2015
|
LIMIT OF THE SCOPE OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION 305/2011/EU WITH RESPECT TO PROCESS PLANT AND AMENDMENTS TO HARMONIZED STANDARDS UNDER THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE |
PREN 14276-2 : DRAFT 2017
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
I.S. EN 1563:2011
|
FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
I.S. EN 13445-2:2014
|
UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
17/30346735 DC : 0
|
BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
PREN 10028-1 : DRAFT 2014
|
FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
BS EN 13611:2015
|
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
16/30334287 DC : 0
|
BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
16/30332605 DC : 0
|
BS EN 10210-1 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
EN 13001-3-6:2018
|
Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders |
I.S. EN 10216-2:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
I.S. EN 13480-2:2017
|
METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
BS EN 13480-8:2017
|
Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
EN 10222-1:2017
|
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
BS EN 13480-2:2017
|
Metallic industrial piping Materials |
BS EN 13480-8:2017+A1:2019
|
Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
BS EN 10216-2:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
DIN EN 12952-6:2011-10
|
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
DIN EN 14359 E : 2017
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
BS EN 14141:2013
|
Valves for natural gas transportation in pipelines. Performance requirements and tests |
BS EN 13835:2012
|
Founding. Austenitic cast irons |
UNE-EN 10272:2016
|
Stainless steel bars for pressure purposes |
BS EN 10088-2:2014
|
Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
UNE-EN 1559-1:2011
|
Founding - Technical conditions of delivery - Part 1: General |
DIN EN 14893:2014-09
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
BS EN 10272:2007
|
Stainless steel bars for pressure purposes |
BS EN 1559-1:2011
|
Founding. Technical conditions of delivery General |
DIN EN 12493:2017-01
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
DIN EN 1562:2012-05
|
FOUNDING - MALLEABLE CAST IRONS |
I.S. EN 10216-4:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
I.S. EN 10222-1:2017
|
STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS |
I.S. EN 14870-1:2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
EN 10149-1:2013
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
EN 12952-2:2011
|
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN 12952-5:2011
|
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
CEN/TS 15718:2011
|
Railway applications - Wheelsets and bogies - Product requirements for cast wheels |
EN 10216-1:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
EN 10272:2016
|
Stainless steel bars for pressure purposes |
EN 13001-3-1:2012+A2:2018
|
Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure |
EN 10207:2017
|
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
EN 10028-1:2017
|
Flat products made of steels for pressure purposes - Part 1: General requirements |
DIN EN 15551:2011-01
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
DIN EN 16767 E : 2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
BS EN 16451:2015
|
Railway applications. Braking. Brake pad holder |
13/30277434 DC : 0
|
BS EN 14399-4 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES |
EN 10217-7:2014
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
DIN EN 16451:2015-09
|
RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
13/30248693 DC : 0
|
BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
I.S. EN 13611:2015
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
UNI EN 1562 : 2012
|
FOUNDING - MALLEABLE CAST IRONS |
UNE-EN 1563:2012
|
Founding - Spheroidal graphite cast irons |
12/30270633 DC : 0
|
BS EN 10222-1 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
DIN EN 15551:2013-05 (Draft)
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
11/30253751 DC : 0
|
BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
PREN 10219-1 : DRAFT 2016
|
COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
EN 4700-002:2016
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
UNI EN 10217-7 : 2014
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
PREN 10253-4 : DRAFT 2017
|
BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
PREN 10088-2 : DRAFT 2011
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DD CEN/TS 15718:2011
|
Railway applications. Wheelsets and bogies. Product requirements for cast wheels |
BS EN 15551:2017
|
Railway applications. Railway rolling stock. Buffers |
PREN 10210-1 : DRAFT 2016
|
HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
DIN EN 14893 E : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
PREN 764-4 : DRAFT 2012
|
PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
PREN 10272 : DRAFT 2013
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
UNE-EN 13480-8:2017
|
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.) |
15/30322070 DC : 0
|
BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
17/30346741 DC : 0
|
BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
UNI EN 1563 : 2012
|
FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
17/30360051 DC : 0
|
BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
UNE-EN 12952-6:2012
|
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
I.S. EN 14460:2018
|
EXPLOSION RESISTANT EQUIPMENT |
DIN EN 10216-5:2014-03
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
I.S. EN 1562:2012
|
FOUNDING - MALLEABLE CAST IRONS |
DIN EN 12252:2014-07
|
LPG equipment and accessories - Equipping of LPG road tankers |
DIN EN 13796-1 E : 2006
|
SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
DIN EN 1559-1:2011-05
|
Founding - Technical conditions of delivery - Part 1: General |
DIN EN 10269:2014-02
|
STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
DIN EN 10216-2:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
BS EN 10216-4:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
BS EN 12252:2014
|
LPG equipment and accessories. Equipping of LPG road tankers |
UNE-EN 14141:2014
|
Valves for natural gas transportation in pipelines - Performance requirements and tests |
DIN EN 1559-2:2014-12
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
I.S. EN 10216-1:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
I.S. EN 10273:2016
|
HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
I.S. EN 10216-3:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
I.S. EN 13796-1:2017
|
SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
DIN EN 10028-1:2017-10
|
FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
I.S. EN 10216-5:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
I.S. EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
I.S. EN 10217-7:2014
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
I.S. EN 12952-6:2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
DIN EN 13611:2019-06
|
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
I.S. EN 13835:2012
|
FOUNDING - AUSTENITIC CAST IRONS |
DIN EN 10088-2:2014-12
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DIN EN 13796-1:2006-01
|
SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
I.S. EN 1559-1:2011
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
I.S. EN 10149-1:2013
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
I.S. EN 10269:2013
|
STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
I.S. EN 12952-2:2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
I.S. EN 1559-2:2014
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
DIN EN 12252:2000-10
|
LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
I.S. EN 14141:2013
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
I.S. EN 10272:2016&LC:2016
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
I.S. EN 13480-8:2017&LC:2019
|
METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
I.S. EN 14893:2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
I.S. EN 10088-3:2014
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
I.S. EN 12252:2014
|
LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
I.S. EN 12952-5:2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
DIN EN 10088-3:2014-12
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
I.S. EN 764-4:2014
|
PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
I.S. EN 10028-1:2017
|
FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
I.S. EN 1564:2011
|
FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS |
I.S. EN 14359:2017
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
UNI EN 14870-1 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
UNI EN 12493 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
NF EN 12952-2 : 2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
NF EN 13835 : 2012
|
FOUNDING - AUSTENITIC CAST IRONS |
VDI 3405 Blatt 2:2013-08
|
Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
DIN EN 1563:2015-07 (Draft)
|
FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
PREN 13766 : DRAFT 2016
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
12/30260023 DC : 0
|
BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
BS EN 12493 : 2013
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
12/30259070 DC : 0
|
BS EN 764-4 - PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
13/30277431 DC : 0
|
BS EN 14399-3 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
13/30266592 DC : 0
|
BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
I.S. EN 50405:2015
|
RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS |
BS EN 4700-002:2016
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
16/30330752 DC : 0
|
BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
UNI EN 10216-5 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
13/30247837 DC : 0
|
BS EN 13094 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
13/30288572 DC : 0
|
BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
13/30288575 DC : 0
|
BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
EN 13001-3-5:2016
|
Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
16/30322061 DC : DRAFT MAR 2016
|
BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
PREN 10222-1 : DRAFT 2012
|
STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
PREN 14399-3 : DRAFT 2013
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
UNE-EN 50405:2016
|
Railway applications - Current collection systems - Pantographs, testing methods for contact strips |
BS EN 50405 : 2015
|
RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS |
I.S. EN 16767:2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
EN 13445-2:2014/A2:2018
|
UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
EN 1563:2011
|
Founding - Spheroidal graphite cast irons |
KTA 3211.1 : 2015
|
PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
I.S. EN 15551:2017
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
PREN 14359 : DRAFT 2014
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
EN 1562:2012
|
Founding - Malleable cast irons |
PREN 13480-8 : DRAFT 2012
|
METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
17/30347070 DC : 0
|
BS EN 10340-2 - STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
PREN 15566 : DRAFT 2013
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
PREN 1559-2 : DRAFT 2012
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
PREN 13001-3-4 : DRAFT 2016
|
CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
UNE-EN 12952-5:2012
|
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
DIN EN 1564:2012-01
|
Founding - Ausferritic spheroidal graphite cast irons |
I.S. EN 1092-1:2007
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
UNE-EN 14359:2017
|
Gas-loaded accumulators for fluid power applications |
UNE-EN 10088-2:2015
|
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
DIN EN 10216-3:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
DIN EN 14141:2013-08
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
DIN EN 14359:2011-04
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
UNI EN 10216-2 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
UNE-EN 10216-2:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
BS EN 10217-7:2014
|
Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
UNE-EN 764-4:2015
|
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
UNE-EN 10088-3:2015
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
UNE-EN 10216-4:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
UNE-EN 1564:2012
|
Founding - Ausferritic spheroidal graphite cast irons |
EN 13094:2015
|
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
I.S. EN 13094:2015
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
UNI EN 10088-3 : 2014
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN 10269 : 2013
|
Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures |
UNI EN 12952-5 : 2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
UNI EN 13835 : 2012
|
FOUNDING - AUSTENITIC CAST IRONS |
EN 1559-2:2014
|
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
UNI EN 12952-2 : 2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
UNI EN 1559-2 : 2014
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
UNI EN 14893 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
UNI EN 1559-1 : 2011
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
UNI EN 1564 : 2011
|
FOUNDING - AUSFERRITIC SPHEROIDAL GRAFITE CAST IRONS |
UNI EN 14141 : 2013
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
UNI EN 10216-4 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
UNI EN 10216-1 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
EN 14870-1:2011
|
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) |
UNI EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN 10216-3 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
UNI EN 12952-6 : 2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
UNI EN 10149-1 : 2013
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
UNI EN 12252 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
DIN EN 10149-1:2013-12
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
UNI CEN/TS 15718 : 2011
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
14/30279136 DC : 0
|
BS EN 50405 - RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CARBON CONTACT STRIPS |
17/30347067 DC : 0
|
BS EN 10340-1 - STEEL CASTINGS FOR STRUCTURAL USES - PART 1: GENERAL |
EN 10216-5:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
16/30336440 DC : DRAFT MAR 2016
|
BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
13/30281067 DC : 0
|
BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
12/30266615 DC : 0
|
BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
14/30274238 DC : 0
|
BS EN 14359 - GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
13/30241415 DC : 0
|
BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
15/30331863 DC : 0
|
BS EN ISO 10855-2 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING |
PREN 12972 : DRAFT 2017
|
TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
16/30322064 DC : DRAFT MAR 2016
|
BS EN 13001-3-6 - CRANES - GENERAL DESIGN - PART 3-6: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - HYDRAULIC CYLINDERS |
I.S. EN 13001-3-6:2018
|
CRANES - GENERAL DESIGN - PART 3-6: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - HYDRAULIC CYLINDERS |
I.S. EN 13001-3-1:2012
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
I.S. EN 10207:2017
|
STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
PREN 10269 : DRAFT 2011
|
STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
EN 14460:2018
|
Explosion resistant equipment |
EN 1092-1:2018
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
BS EN 13445-2 : 2014
|
UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
PREN 10273 : DRAFT 2013
|
HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
17/30360691 DC : 0
|
BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
BS EN 10207:2017
|
Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars |
DIN EN 13611:2016-09
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
UNE-EN 1562:2012
|
Founding - Malleable cast irons |
DIN EN 12493:2014-03
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
17/30351221 DC : 0
|
BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
PREN 13611 : DRAFT 2017
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
ASTM F 3122 : 2014
|
Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
PREN 14893 : DRAFT 2013
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
UNE-EN 15551:2017
|
Railway applications - Railway rolling stock - Buffers |
PREN 10340-2 : DRAFT 2017
|
STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
EN 10216-2:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
BS EN 13480-2:2017+A3:2018
|
Metallic industrial piping Materials |
DIN EN 13094:2015-07
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
DIN EN 10216-4:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
DIN EN 10217-7:2015-01
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
DIN EN 10272:2016-10
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
BS EN 1564:2011
|
Founding. Ausferritic spheroidal graphite cast irons |
BS EN 1559-2:2014
|
Founding. Technical conditions of delivery Additional requirements for steel castings |
BS EN 10216-5:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
EN 16767:2016
|
Industrial valves - Steel and cast iron check valves |
BS EN 14359:2017
|
Gas-loaded accumulators for fluid power applications |
UNE-EN 13796-1:2017
|
Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
BS EN 10216-3:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
UNE-EN 12952-2:2012
|
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
BS EN 12952-5:2011
|
Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler |
BS EN 764-4:2014
|
Pressure equipment Establishment of technical delivery conditions for metallic materials |
BS EN 13796-1:2005
|
Safety requirements for cableway installations designed to carry persons. Carriers Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
BS EN 10088-3:2014
|
Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
UNE-EN 10269:2014
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
UNE-EN 13835:2012
|
Founding - Austenitic cast irons |
BS EN 12952-6:2011
|
Water-tube boilers and auxiliary installations Inspection during construction; documentation and marking of pressure parts of the boiler |
UNE-EN 13094:2015
|
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
EN 13480-2:2017
|
Metallic industrial piping - Part 2: Materials |
UNE-EN 10216-3:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
UNE-EN 10028-1:2017
|
Flat products made of steels for pressure purposes - Part 1: General requirements |
UNE-EN 10149-1:2014
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
UNE-EN 10216-5:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
UNE-EN 10216-1:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
BS EN 14870-1:2011
|
Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends |
DIN EN 13796-1:2012-06 (Draft)
|
SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
BS EN 10149-1:2013
|
Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions |
DIN EN 13835:2012-04
|
FOUNDING - AUSTENITIC CAST IRONS |
EN 14359:2017
|
Gas-loaded accumulators for fluid power applications |
EN 14893:2014
|
LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
EN 13835:2012
|
Founding - Austenitic cast irons |
EN 15551:2017
|
Railway applications - Railway rolling stock - Buffers |
EN 1564:2011
|
Founding - Ausferritic spheroidal graphite cast irons |
EN 16451:2015
|
Railway applications - Braking - Brake pad holder |
EN 1559-1:2011
|
Founding - Technical conditions of delivery - Part 1: General |
EN 14141:2013
|
Valves for natural gas transportation in pipelines - Performance requirements and tests |
EN 13796-1:2017
|
Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
EN 13480-8:2017
|
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
EN 764-4:2014
|
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
PREN 10253-2 : DRAFT 2017
|
BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
PREN 12252 : DRAFT 2013
|
LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
UNE-EN 14893:2014
|
LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
PREN 14399-4 : DRAFT 2013
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES |
PREN 1563 : DRAFT 2015
|
FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
14/30312182 DC : 0
|
BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
PREN 10088-3 : DRAFT 2011
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
11/30254171 DC : 0
|
BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
15/30331537 DC : 0
|
BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
DIN EN 16451 E : 2015
|
RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
DIN EN 16767:2016-08
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
BS EN 13001-3-5:2016
|
Cranes. General design Limit states and proof of competence of forged hooks |
I.S. EN 4700-002:2016
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
S.R. CEN/TS 15718:2011
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
PREN 4700-002 : 200P3
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
I.S. EN 16451:2015
|
RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
UNE-EN 12493:2014
|
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture |
UNE-EN 13445-2:2015
|
Unfired pressure vessels - Part 2: Materials |
I.S. EN 12493:2013
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
17/30353548 DC : 0
|
BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
17/30346732 DC : 0
|
BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
UNE-EN 13611:2016
|
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
EN 13611:2015/AC:2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
EN 12493:2013+A1:2014/AC:2015
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
DIN EN 764-4:2015-03
|
PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
DIN EN 12952-2:2011-10
|
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
DIN EN 12952-5:2012-01
|
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
DIN EN 10216-1:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
BS EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
BS EN 10216-1:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
UNE-EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
BS EN 14893:2014
|
LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
UNE-EN 10222-1:2017
|
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
BS EN 12952-2:2011
|
Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
BS EN 10222-1:2017
|
Steel forgings for pressure purposes General requirements for open die forgings |
BS EN 10028-1:2017
|
Flat products made of steels for pressure purposes General requirements |
BS EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
BS EN 13094:2015
|
Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction |
EN 10216-4:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
EN 12252:2014
|
LPG equipment and accessories - Equipping of LPG road tankers |
EN 12952-6:2011
|
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
I.S. EN 13611:2015/AC:2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
EN 10216-3:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
DIN EN 14359:2017-09
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
EN 50405 : 2015 AMD 1 2016
|
RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS |
UNE-EN 13480-2:2017
|
Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.) |