EN ISO 16433:2007
Current
The latest, up-to-date edition.
Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels (ISO 16433:2006)
20-06-2007
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
4.1 Form
4.2 Steel grades
4.3 Surface conditions
5 Component design and manufacture
5.1 Component design
5.2 Component manufacture
6 Process requirements
6.1 Seam welding with wide wheels
6.2 Seam welding with thin wheels
6.3 Mash seam welding
6.4 Wire seam welding
6.5 Wide-electrode seam welding
6.6 Foil seam welding
7 Welding equipment
7.1 Welding machine
7.2 Electrodes (wheels, mandrels, pads, backing bars)
7.2.1 Electrode material
7.2.2 Electrode dimensions
7.3 Electrode-wheel cooling
8 Weldability assessment
9 Weld assessment - Type tests
9.1 Test pieces
9.1.1 General
9.1.2 Manual peel test piece
9.1.3 Mechanised peel test piece
9.1.4 Pressure test
9.1.5 Metallurgical examination
9.2 Test requirements
9.2.1 Weld dimensions
9.2.2 Manual peel test
9.2.3 Mechanised peel
9.2.4 Pressure test
9.2.5 Visual and metallurgical examination
9.3 Acceptance requirements
10 Weld assessment - routine tests
10.1 General
10.2 Batch testing
10.3 Test pieces and test procedures
10.4 Number of tests
10.5 Test requirements
11 Routine production weld quality-control requirements
11.1 Weld size - nugget width
11.2 Weld dimensions
11.3 Weld failure mode
11.4 Weld appearance - surface condition
11.5 Distortion
12 Reclamation of non-conformant assemblies
Annex A (informative) Welding equipment
Annex B (informative) Typical seam welding conditions
Annex C (Informative) Partial list of steel types applicable
to the standard
Bibliography
ISO16433:2006 specifies requirements for resistance seam welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel comprising two sheets of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm for the following materials:uncoated steels;hot-dip zinc or iron-zinc alloy (galvannealed) coated steel;electrolytic zinc, zinc-iron, or zinc-nickel coated steel;aluminium coated steel;zinc-aluminium coated steel.
Committee |
CEN/TC 121
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
BS EN ISO 16433:2007 | Identical |
UNI EN ISO 16433 : 2008 | Identical |
I.S. EN ISO 16433:2007 | Identical |
NF EN ISO 16433 : 2007 | Identical |
UNE-EN ISO 16433:2008 | Identical |
NBN EN ISO 16433 : 2007 | Identical |
SN EN ISO 16433 : 2007 | Identical |
NEN EN ISO 16433 : 2007 | Identical |
DIN EN ISO 16433:2007-09 | Identical |
NS EN ISO 16433 : 1ED 2007 | Identical |
ISO 16433:2006 | Identical |
DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
ISO 5182:2016 | Resistance welding Materials for electrodes and ancillary equipment |
ISO 14270:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds |
ISO 10447:2015 | Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds |
ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
ISO 3573:2012 | Hot-rolled carbon steel sheet of commercial and drawing qualities |
ISO 17654:2011 | Resistance welding Destructive tests of welds Pressure test of resistance seam welds |
ISO 9364:2011 | Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities |
ISO 4998:2014 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
ISO 5002:2013 | Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities |
ISO 15614-12:2014 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 12: Spot, seam and projection welding |
ISO 669:2016 | Resistance welding Resistance welding equipment Mechanical and electrical requirements |
ISO 14327:2004 | Resistance welding Procedures for determining the weldability lobe for resistance spot, projection and seam welding |
ISO 14329:2003 | Resistance welding Destructive tests of welds Failure types and geometric measurements for resistance spot, seam and projection welds |
ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
ISO 3575:2016 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities |
ISO 4950-2:1995 | High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition |
ISO 4950-1:1995 | High yield strength flat steel products — Part 1: General requirements |
ISO 5000:2011 | Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.