08/30185924 DC : 0
|
BS EN 1071-10 - ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
15/30329701 DC : 0
|
BS EN 13523-1 - COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
I.S. EN 12373-1:2001
|
ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM |
BS EN 4704:2012
|
Aerospace series. Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
I.S. EN 12206-1:2004
|
PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER |
PREN 4827 : DRAFT 2015
|
AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
BS EN 14879-2:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
BS EN 14430:2004
|
Vitreous and porcelain enamels. High voltage test |
BS EN 12206-1:2004
|
Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder |
EN 1071-10:2009
|
Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning |
EN 12373-9:1998
|
Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus |
DIN EN 14879-4:2008-01
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
DIN EN 14879-2:2007-02
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
DIN EN 13523-1:2017-05
|
COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
EN 12983-1:2000/AC:2008
|
COOKWARE - DOMESTIC COOKWARE FOR USE ON TOP OF A STOVE, COOKER OR HOB - PART 1: GENERAL REQUIREMENTS |
EN 12330 : 2000
|
CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL |
EN 13048:2009
|
Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method |
ONORM EN 12983-1 : 2008
|
COOKWARE - DOMESTIC COOKWARE FOR USE ON TOP OF A STOVE, COOKER OR HOB - PART 1: GENERAL REQUIREMENTS |
I.S. EN 12983-1:2000
|
COOKWARE - DOMESTIC COOKWARE FOR USE ON TOP OF A STOVE, COOKER OR HOB - PART 1: GENERAL REQUIREMENTS |
IPC HDBK 830 : A
|
GUIDELINES FOR DESIGN, SELECTION AND APPLICATION OF CONFORMAL COATINGS |
I.S. EN 12330:2000
|
CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL |
I.S. EN 12329:2000
|
CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
I.S. EN 14430:2004
|
VITREOUS AND PORCELAIN ENAMELS - HIGH VOLTAGE TEST |
12/30271191 DC : 0
|
BS EN 4827 - AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
EN 12206-1:2004
|
Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
04/30109201 DC : DRAFT OCT 2004
|
EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
PREN 4704 : 200P1
|
AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
I.S. EN 4704:2012
|
AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
I.S. EN 4827:2017
|
AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
DIN EN 14879-4 E : 2008
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 4: LININGS ON METALLIC COMPONENTS |
DIN EN 13048:2009-08
|
Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method |
BS EN 12329:2000
|
Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel |
BS EN 13523-1:2017
|
Coil coated metals. Test methods Film thickness |
DIN EN 12329:2000-09
|
CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON AND STEEL |
DIN EN 12206-1:2004-09
|
Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
I.S. EN 13523-1:2017
|
COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
I.S. EN 13048:2009
|
PACKAGING - FLEXIBLE ALUMINIUM TUBES - INTERNAL LACQUER FILM THICKNESS MEASUREMENT METHOD |
VDI 3823 Blatt 4:2006-11
|
Vacuum coating quality assurance - Testing of vacuum coated plastics |
17/30364786 DC : 0
|
BS EN 4827 - AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
17/30364785 DC : 0
|
BS EN 4868 - AEROSPACE SERIES - ANODIC ELECTRODEPOSITION OF PRIMER |
I.S. CEN TS 1071-10:2004
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
BS EN 4827:2017
|
Aerospace series. Hexavalent chromium free anodizing of aluminium and aluminium alloys |
PREN 13523-1 : DRAFT 2015
|
COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
UNI EN 1071-10 : 2009
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
I.S. EN 1071-10:2009
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
DIN EN 14879-2 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
BS EN ISO 14923:2003
|
Thermal spraying. Characterization and testing of thermally sprayed coatings |
ISO 3882:2003
|
Metallic and other inorganic coatings — Review of methods of measurement of thickness |
I.S. EN 13834:2009
|
COOKWARE - OVENWARE FOR USE IN TRADITIONAL DOMESTIC OVENS |
ONORM EN 13834 : 2009
|
COOKWARE - OVENWARE FOR USE IN TRADITIONAL DOMESTIC OVENS |
EN ISO 14923:2003
|
Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
EN 13750:2002
|
Domestic water kettles for use on top of stove, cooker or hob - Requirements and test methods |
UNI EN 13834 : 2009
|
COOKWARE - OVENWARE FOR USE IN TRADITIONAL DOMESTIC OVENS |
UNI EN 13048 : 2009
|
PACKAGING - FLEXIBLE ALUMINIUM TUBES - INTERNAL LACQUER FILM THICKNESS MEASUREMENT METHOD |
I.S. EN 12373-9:1999
|
ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - MEASUREMENT OF WEAR RESISTANCE AND WEAR INDEX OF ANODIC OXIDATION COATINGS USING AN ABRASIVE WHEEL WEAR TEST APPARATUS |
I.S. EN 12373-10:1999
|
ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 10: MEASUREMENT OF MEAN SPECIFIC ABRASION RESISTANCE OF ANODIC OXIDATION COATINGS USING AN ABRASIVE JET TEST APPARATUS |
DD ENV 13834:2000
|
Cookware. Ovenware for use in domestic thermal ovens |
07/30172345 DC : 0
|
BS EN 15724 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - SECONDARY CONTAINMENTS USED WITH TANKS COMPLYING WITH EN 13341 - REQUIREMENTS AND TEST METHODS |
DIN EN 13523-1:2015-12 (Draft)
|
COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
DIN EN ISO 3882:2003-10
|
METALLIC AND OTHER INORGANIC COATINGS - REVIEW OF METHODS OF MEASUREMENT OF THICKNESS |
BS EN ISO 3882:2003
|
Metallic and other inorganic coatings. Review of methods of measurement of thickness |
BS EN 12373-9:1999
|
Aluminium and aluminium alloys. Anodizing Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus |
BS EN 14879-4:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
BS EN 12983-1 : 2000
|
COOKWARE - DOMESTIC COOKWARE FOR USE ON TOP OF A STOVE, COOKER OR HOB - PART 1: GENERAL REQUIREMENTS |
BS EN 13048:2009
|
Packaging. Flexible aluminium tubes. Internal lacquer film thickness measurement method |
BS EN 13834 : 2007
|
COOKWARE - OVENWARE FOR USE IN TRADITIONAL DOMESTIC OVENS |
ISO 14923:2003
|
Thermal spraying Characterization and testing of thermally sprayed coatings |
BS EN 13750:2002
|
Domestic water kettles for use on top of stove, cooker or hob. Requirements and test methods |
UNE-EN 13523-1:2017
|
Coil coated metals - Test methods - Part 1: Film thickness |
BS EN 12330:2000
|
Corrosion protection of metals. Electrodeposited coatings of cadmium on iron or steel |
EN 4827:2017
|
Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys |
EN 14879-2:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
EN 14430 : 2004
|
VITREOUS AND PORCELAIN ENAMELS - HIGH VOLTAGE TEST |
EN 12373-10:1998
|
Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
EN 4704:2012
|
Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
ENV 13834 : 2000
|
COOKWARE - OVENWARE FOR USE IN CONVENTIONAL DOMESTIC OVENS |
EN ISO 3882:2003
|
Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
EN 14879-4:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
BS EN 1071-10:2009
|
Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by cross sectioning |
05/30137579 DC : DRAFT AUG 2005
|
EN 13834 - COOKWARE - OVENWARE FOR USE IN TRADITIONAL DOMESTIC OVENS |
08/30173308 DC : DRAFT MAY 2008
|
BS EN 13523-1 - COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
DIN EN 1071-10:2009-10
|
Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning |
10/30215608 DC : 0
|
BS EN 4704 - AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODISING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
DD CEN/TS 1071-10:2004
|
Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by cross section |
PREN 4868 : DRAFT 2018
|
AEROSPACE SERIES - ANODIC ELECTRODEPOSITION OF HEXAVALENT CHROMIUM FREE PRIMER |
DIN 28054-1:2000-09
|
CHEMICAL APPARATUS - COATING WITH ORGANIC MATERIALS FOR METALLIC COMPONENTS - PART 1: REQUIREMENTS AND TESTING |
UNI EN 4704 : 2013
|
AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
BS EN 12373-1:2001
|
Aluminium and aluminium alloys. Anodizing Method for specifying decorative and protective anodic oxidation coatings on aluminium |
BS EN 12373-10:1999
|
Aluminium and aluminium alloys. Anodizing Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
EN 13523-1:2017
|
Coil coated metals - Test methods - Part 1: Film thickness |
EN 12329 : 2000
|
CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
CEN/TS 1071-10 : 2004
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
EN 12373-1 : 2001
|
ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM |
DIN EN ISO 14923:2003-10
|
THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS |
DIN EN 14430:2004-12
|
VITREOUS AND PORCELAIN ENAMELS - HIGH VOLTAGE TEST |
DIN EN 13834:2009-07
|
COOKWARE - OVENWARE FOR USE IN TRADITIONAL DOMESTIC OVENS |