EN ISO 2439:2008
Current
The latest, up-to-date edition.
Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
15-12-2008
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Test pieces
6.1 Shape and dimensions
6.2 Samples showing orientation
6.3 Conditioning
7 Procedure
7.1 General
7.2 Preliminary indentation for Methods A, B and C
7.3 Method A - Determination of the 40%/30 s indentation
hardness index
7.4 Method B - Determination of the 25%-40%-65%/30 s
indentation hardness characteristics
7.5 Method C - Determination of the 40% indentation
hardness check
7.6 Method D - Determination of the 25%/20 s low indentation
hardness index
7.7 Method E - Determination of the compressive deflection
coefficient and hysteresis loss rate
8 Repeat tests
9 Test report
Annex A (informative) - Test method parameters and typical graphs
Annex B (informative) - Precision of Method E
Bibliography
The indentation hardness of flexible cellular materials is a measure of their load-bearing properties. ISO 2439:2008 specifies four methods (A to D) for the determination of indentation hardness and one method (E) for determination of compressive deflection coefficient and hysteresis loss rate of flexible cellular materials. Annex A provides a summary of test parameters and typical force-indentation graphs obtained with these methods.These five methods are applicable only to latex foam, urethane foam and PVC foam of the open-cell type. The methods specified can be used for testing finished articles and for the characterization of bulk material.ISO 2439:2008 specifies the following methods:Method A — Determination of the 40 %/30 s indentation hardness index, which gives a single indentation measurement for laboratory test purposes;Method B — Determination of the 25 %-40 %-65 %/30 s indentation hardness characteristics, which provides information about the shape of the hardness indentation curve;Method C — Determination of the 40 % indentation hardness check, which is a quick procedure suitable for quality control testing;Method D — Determination of the 25 %/20 s low indentation hardness index, which is a quick procedure suitable as an inspection test;Method E — Determination of the compressive deflection coefficient and hysteresis loss rate, which gives additional information about the load-bearing properties of materials.The results obtained by these methods relate only to the test conditions specified and cannot, in general, be used directly for design purposes.
Committee |
CEN/TC 249
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
UNI EN ISO 2439 : 2009 | Identical |
DIN EN ISO 2439:2009-05 | Identical |
PN EN ISO 2439 : 2010 | Identical |
I.S. EN ISO 2439:2009 | Identical |
ISO 2439:2008 | Identical |
NS EN ISO 2439 : 2ED 2008 | Identical |
NEN EN ISO 2439 : 2009 | Identical |
UNE-EN ISO 2439:2009 | Identical |
BS EN ISO 2439:2008 | Identical |
PN ISO 2439 : 2000 | Identical |
NBN EN ISO 2439 : 2009 | Identical |
SN EN ISO 2439 : 2009 | Identical |
NF EN ISO 2439 : 2009 | Identical |
SS-EN ISO 2439:2008 | Identical |
I.S. EN 14035-22:2004 | FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS |
09/30201918 DC : 0 | BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS |
DIN EN 16265:2016-05 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
I.S. EN 14035-13:2004 | FIREWORKS - PART 13: FLASH PELLETS - SPECIFICATION AND TEST METHODS |
I.S. EN 14035-35:2004 | FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS |
PREN 716-2 : DRAFT 2015 | FURNITURE - CHILDREN'S COTS AND FOLDING COTS FOR DOMESTIC USE - PART 2: TEST METHODS |
BS EN 60312:2008 | Vacuum cleaners for household use. Methods of measuring the performance |
DIN EN 16263-4:2015-11 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS |
PD EN 14035-8:2004 | Fireworks Bengal sticks. Specification and test methods |
DIN EN 16256-5:2013-03 | PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS |
I.S. EN 14035-5:2006 | FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS |
I.S. EN 80601-2-35:2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS AND MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE |
UNE-EN 16890:2018 | Children's furniture - Mattresses for cots and cribs - Safety requirements and test methods |
I.S. EN 60299:2014 | HOUSEHOLD ELECTRIC BLANKETS - METHODS FOR MEASURING PERFORMANCE |
BS EN 14035-6:2004 | Fireworks Bengal flames. Specification and test methods |
BS EN 716-2:2017 | Furniture. Children\'s cots and folding cots for domestic use Test methods |
BS EN 14035-35:2004 | Fireworks Throwdowns. Specification and test methods |
I.S. EN 716-2:2017 | FURNITURE - CHILDREN'S COTS AND FOLDING COTS FOR DOMESTIC USE - PART 2: TEST METHODS |
DIN EN 14035-35:2005-02 | FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS |
EN 747-2:2012+A1:2015 | Furniture - Bunk beds and high beds - Part 2: Test methods |
EN 12227:2010 | Playpens for domestic use - Safety requirements and test methods |
EN 61255:2014 | Household electric heating pads - Methods for measuring performance |
DIN EN 14035-10:2004-11 | FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS |
I.S. EN 14035-24:2004 | FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS |
DIN EN 14035-31:2006-01 | FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS |
BS EN 16263-4:2015 | Pyrotechnic articles. Other pyrotechnic articles Test methods |
I.S. EN 14035-7:2004 | FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS |
BS EN 60299:2014 | Household electric blankets. Methods for measuring performance |
PD EN 14035-3:2004 | Fireworks Aerial wheels. Specification and test methods |
DIN EN 16264:2014-11 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
15/30297361 DC | BS ISO 26261-3. Fireworks. Category 4. Part 3. Test methods |
PD EN 14035-13:2004 | Fireworks Flash pellets. Specification and test methods |
CEI EN 60312 : 2008 | VACUUM CLEANERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
I.S. EN 14035-31:2005 | FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS |
EN 16890:2017 | CHILDREN'S FURNITURE - MATTRESSES FOR COTS AND CRIBS - SAFETY REQUIREMENTS AND TEST METHODS |
UNE-EN 16264:2015 | Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuated tools |
I.S. EN 61255:2014 | HOUSEHOLD ELECTRIC HEATING PADS - METHODS FOR MEASURING PERFORMANCE |
I.S. EN 60335-2-81:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335 -2-81:2002 (EQV)) |
BS EN 12227:2010 | Playpens for domestic use. Safety requirements and test methods |
I.S. EN 14035-3:2004 | FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS |
BS EN 15947-4 : 2016 | PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS |
I.S. EN 16120:2012 | CHILD USE AND CARE ARTICLES - CHAIR MOUNTED SEAT |
DIN EN 747-2:2015-08 | Furniture - Bunk beds and high beds - Part 2: Test methods (includes Amendment A1:2015) |
DIN EN 13453-2:2004-09 | FURNITURE - BUNK BEDS AND HIGH BEDS FOR NON-DOMESTIC USE - PART 2: TEST METHODS |
UNE-EN 1272:2018 | Child care articles - Table mounted chairs - Safety requirements and test methods |
DIN EN 14035-24:2004-11 | FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS |
DIN EN 14035-25:2006-01 | FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
DIN EN 14035-28:2004-11 | FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS |
I.S. EN 747-2:2012 | FURNITURE - BUNK BEDS AND HIGH BEDS - PART 2: TEST METHODS |
DIN EN 14035-22:2004-11 | FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS |
DIN EN 14035-8:2004-11 | FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS |
DIN EN 14035-7:2004-11 | FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS |
DIN EN 14035-9:2004-11 | FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS |
DIN EN 14035-6:2004-11 | FIREWORKS - PART 6: BENGAL FLAMES - SPECIFICATION AND TEST METHODS |
DIN EN 14035-5:2006-05 | FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS |
DIN EN 1273:2005-08 | CHILD USE AND CARE ARTICLES - BABY WALKING FRAMES - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 14035-3:2004-11 | FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS |
I.S. EN 1932:2013 | EXTERNAL BLINDS AND SHUTTERS - RESISTANCE TO WIND LOADS - METHOD OF TESTING AND PERFORMANCE CRITERIA |
DIN EN 1932:2013-09 | EXTERNAL BLINDS AND SHUTTERS - RESISTANCE TO WIND LOADS - METHOD OF TESTING AND PERFORMANCE CRITERIA |
I.S. EN 1272:2017 | CHILD CARE ARTICLES - TABLE MOUNTED CHAIRS - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 14035-38:2006-05 | FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS |
VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
I.S. EN 14035-28:2004 | FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS |
I.S. EN 14035-25:2005 | FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
I.S. EN 16261-3:2012 | PYROTECHNIC ARTICLES - FIREWORKS, CATEGORY 4 - PART 3: TEST METHODS |
BS EN 16265:2015 | Pyrotechnic articles. Other pyrotechnic articles. Ignition devices |
I.S. EN 14035-19:2003 | FIREWORKS - PART 19: HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS |
DIN EN 16261-3:2013-03 | Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods |
UNE-EN 12227:2011 | Playpens for domestic use - Safety requirements and test methods |
BS EN 16264:2014 | Pyrotechnic articles. Other pyrotechnic articles. Cartridges for powder actuated tools |
10/30219375 DC : 0 | |
PD EN 14035-17:2004 | Fireworks Ground spinners. Specification and test methods |
I.S. EN 16264:2014 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
EN 80601-2-35:2009/A1:2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS AND MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE (IEC 80601-2-35:2009/A1:2016) |
UNI EN 12227 : 2010 | PLAYPENS FOR DOMESTIC USE - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 14035-21:2005 | FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
DIN EN 15947-4:2016-02 | Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
BS EN 16890:2017 | Children\'s furniture. Mattresses for cots and cribs. Safety requirements and test methods |
I.S. EN 14035-33:2005 | FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS |
CEI EN 60335-2-17 : 2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR BLANKETS, PADS, CLOTHING AND SIMILAR FLEXIBLE HEATING APPLIANCES |
DIN EN 1272:2016-02 (Draft) | CHILD CARE ARTICLES - TABLE MOUNTED CHAIRS - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 14035-25:2005 | Fireworks Party poppers. Specification and test methods |
BS EN 14035-22:2004 | Fireworks Mines. Specification and test methods |
BS EN 14035-7:2004 | Fireworks Bengal matches. Specification and test methods |
I.S. EN 1273:2005 | CHILD USE AND CARE ARTICLES - BABY WALKING FRAMES - SAFETY REQUIREMENTS AND TEST METHODS |
EN 1273:2005 | CHILD USE AND CARE ARTICLES - BABY WALKING FRAMES - SAFETY REQUIREMENTS AND TEST METHODS |
EN 16120 : 2012 COR 2017 | CHILD USE AND CARE ARTICLES - CHAIR MOUNTED SEAT |
UNE-EN 60335-2-17:2013 | Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances |
ONORM EN 1273 : 2005 | CHILD USE AND CARE ARTICLES - BABY WALKING FRAMES - SAFETY REQUIREMENTS AND TEST METHODS |
EN 14035-21 : 2005 | FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
EN 14035-20 : 2005 | FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
UNI EN 1932 : 2013 | EXTERNAL BLINDS AND SHUTTERS - RESISTANCE TO WIND LOADS - METHOD OF TESTING AND PERFORMANCE CRITERIA |
DIN EN 16890:2015-08 (Draft) | CHILDREN'S FURNITURE - MATTRESSESS FOR COTS AND CRIBS - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 14035-38:2006 | FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS |
DIN EN 12227:2010-12 | Playpens for domestic use - Safety requirements and test methods |
UNE-EN 15947-4:2016 | Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
UNE-EN 16265:2016 | Pyrotechnic articles - Other pyrotechnic articles - Ignition devices |
15/30326840 DC : 0 | BS EN 716-2 - FURNITURE - CHILDREN'S COTS AND FOLDING COTS FOR DOMESTIC USE - PART 2: TEST METHODS |
NF EN 12227 : 2010 | PLAYPENS FOR DOMESTIC USE - SAFETY REQUIREMENTS AND TEST METHODS |
PD EN 14035-10:2004 | Fireworks Double bangers. Specification and test methods |
PD EN 14035-31:2005 | Fireworks Shell-in-mortars. Specification and test methods |
DIN EN 14035-13:2004-11 | FIREWORKS - PART 13: FLASH PELLETS - SPECIFICATION AND TEST METHODS |
PD EN 14035-9:2004 | Fireworks Crackling granules. Specification and test methods |
15/30320422 DC : 0 | BS EN 1272 - CHILD CARE ARTICLES - TABLE MOUNTED CHAIRS - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 60335-2-81 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-81: PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS |
PD EN 14035-12:2003 | Fireworks Flash bangers and flash banger batteries. Specification and test methods |
16/30341219 DC : 0 | BS EN 17022 - CHILD CARE ARTICLES - BATHING AIDS - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 60335-2-17:2013 | Household and similar electrical appliances. Safety Particular requirements for blankets, pads, clothing and similar flexible heating appliances |
BS EN 60335-2-66 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-66: PARTICULAR REQUIREMENTS FOR WATER-BED HEATERS |
I.S. EN 16890:2017 | CHILDREN'S FURNITURE - MATTRESSES FOR COTS AND CRIBS - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 16256-5:2012 | PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS |
I.S. EN 14035-9:2004 | FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS |
I.S. EN 60335-2-17:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-17: PARTICULAR REQUIREMENTS FOR BLANKETS, PADS, CLOTHING AND SIMILAR FLEXIBLE HEATING APPLIANCES (IEC 60335-2-17:2012 (EQV)) |
PREN 1272 : DRAFT 2015 | CHILD CARE ARTICLES - TABLE MOUNTED CHAIRS - SAFETY REQUIREMENTS AND TEST METHODS |
PD EN 14035-18:2004 | Fireworks Hand-held fountains. Specification and test methods |
I.S. EN 15947-4:2015 | PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS |
I.S. EN 14035-17:2004 | FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
I.S. EN 14035-10:2004 | FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS |
UNE-EN 1932:2014 | External blinds and shutters - Resistance to wind loads - Method of testing and performance criteria |
BS EN 1273:2005 | Child use and care articles. Baby walking frames. Safety requirements and test methods |
BS EN 14035-38:2006 | Fireworks Shot tubes. Specification and test methods |
EN 60335-2-17:2013 | Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances |
BS EN 14035-34:2003 | Fireworks Table bombs. Specification and test methods |
BS EN 14035-19:2003 | Fireworks Hand-held sparklers. Specification and test methods |
BS EN 747-2 : 2012 | FURNITURE - BUNK BEDS AND HIGH BEDS - PART 2: TEST METHODS |
BS EN 14035-24:2004 | Fireworks Novelty matches. Specification and test methods |
BS EN 14035-23:2003 | Fireworks Non-hand-held sparklers. Specification and test methods |
BS EN 1272:2017 | Child care articles. Table mounted chairs. Safety requirements and test methods |
BS EN 1932:2013 | External blinds and shutters. Resistance to wind loads. Method of testing and performance criteria |
BS EN 14072:2003 | Glass in furniture. Test methods |
BS EN 14035-15:2003 | Fireworks Fountains. Specification and test methods |
BS EN 14035-5:2006 | Fireworks Batteries and combinations. Specification and test methods |
EN 14035-3 : 2004 | FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS |
EN 16261-3:2012 | Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods |
EN 14035-7 : 2004 | FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS |
EN 1932:2013 | External blinds and shutters - Resistance to wind loads - Method of testing and performance criteria |
EN 14035-25 : 2005 | FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
EN 14035-35 : 2004 | FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS |
EN 14035-22 : 2004 | FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS |
EN 14035-24 : 2004 | FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS |
EN 15947-4:2015 | Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
EN 14035-8 : 2004 | FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS |
EN 14035-17 : 2004 | FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
EN 14035-33 : 2005 | FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS |
EN 14035-10 : 2004 | FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS |
EN 14035-13 : 2004 | FIREWORKS - PART 13: FLASH PELLETS - SPECIFICATION AND TEST METHODS |
EN 16265:2015 | Pyrotechnic articles - Other pyrotechnic articles - Ignition devices |
EN 14035-18 : 2004 | FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS |
EN 14035-6 : 2004 | FIREWORKS - PART 6: BENGAL FLAMES - SPECIFICATION AND TEST METHODS |
EN 16263-4:2015 | Pyrotechnic articles - Other pyrotechnic articles - Part 4: Test methods |
EN 16256-5:2012 | Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods |
EN 14035-31 : 2005 | FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS |
EN 14035-28 : 2004 COR 2006 | FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS |
EN 14072:2003 | Glass in furniture - Test methods |
EN 14035-9 : 2004 | FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS |
EN 716-2:2017 | Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods |
EN 14035-38:2006 | Fireworks - Part 38: Shot tubes - Specification and test methods |
EN 14035-5 : 2006 | FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS |
UNE-EN 16261-3:2014 | Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods |
14/30303444 DC : 0 | BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS |
BS EN 16256-5:2012 | Pyrotechnic articles. Theatrical pyrotechnic articles Test methods |
PD EN 14035-20:2005 | Fireworks Jumping crackers. Specification and test methods |
DIN EN 16120:2014-07 | CHILD USE AND CARE ARTICLES - CHAIR MOUNTED SEAT |
PD EN 14035-33:2006 | Fireworks Spinners. Specification and test methods |
UNI EN 16264 : 2014 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
UNE-EN 16256-5:2013 | Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods |
I.S. EN 14035-6:2004 | FIREWORKS - PART 6: BENGAL FLAMES - SPECIFICATION AND TEST METHODS |
DIN EN 716-2:2015-10 (Draft) | FURNITURE - CHILDREN'S COTS AND FOLDING COTS FOR DOMESTIC USE - PART 2: TEST METHODS |
I.S. EN 13453-2:2004 | FURNITURE - BUNK BEDS AND HIGH BEDS FOR NON-DOMESTIC USE - PART 2: TEST METHODS |
DIN EN 14035-33:2006-01 | FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS |
I.S. EN 16265:2015 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
BS EN 16261-3:2012 | Pyrotechnic articles. Fireworks, Category 4 Test methods |
15/30324386 DC : DRAFT JULY 2015 | BS EN 16890 - CHILDREN'S FURNITURE - MATTRESSES FOR COTS AND CRIBS - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 14035-21:2006-01 | FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
DIN EN 14035-20:2005-06 | FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
BS EN 80601-2-35 : 2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS AND MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE |
BS EN 16120 : 2012 | CHILD USE AND CARE ARTICLES - CHAIR MOUNTED SEAT |
PD EN 14035-21:2005 | Fireworks Jumping ground spinners. Specification and test methods |
DIN EN 14035-17:2004-11 | FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
BS EN 61255:2014 | Household electric heating pads. Methods for measuring performance |
UNE-EN 16263-4:2016 | Pyrotechnics articles - Other pyrotechnic articles - Part 4: Test methods |
I.S. EN 14035-18:2005 | FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS |
I.S. EN 16263-4:2015 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS |
I.S. EN 14035-8:2004 | FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS |
I.S. EN 14035-20:2005 | FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
I.S. EN 60335-2-66:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-66: PARTICULAR REQUIREMENTS FOR WATER-BED HEATERS (IEC 60335-2-66:2002 (EQV)) |
I.S. EN 12227:2010 | PLAYPENS FOR DOMESTIC USE - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 60312:2008 | VACUUM CLEANERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
BS EN 14035-28:2004 | Fireworks Roman candles. Specification and test methods |
BS EN 13453-2:2004 | Bunk beds and high beds for non-domestic use Test methods |
EN 60335-2-81:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-81: PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335-2-81:2002/A2:2011) |
DIN EN 16120:2017-03 | CHILD USE AND CARE ARTICLES - CHAIR MOUNTED SEAT |
DIN EN 14072:2004-02 | Glass in furniture - Test methods |
EN 60312:2008 | Vacuum cleaners for household use - Methods of measuring the performance |
EN 1272:2017 | Child care articles - Table mounted chairs - Safety requirements and test methods |
EN 60299:2014 | Household electric blankets - Methods for measuring performance |
EN 13453-2 : 2004 | FURNITURE - BUNK BEDS AND HIGH BEDS FOR NON-DOMESTIC USE - PART 2: TEST METHODS |
UNE-EN 16120:2013 | Child use and care articles - Chair mounted seat |
UNE-EN 747-2:2012 | Furniture - Bunk beds and high beds - Part 2: Test methods |
ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
ISO 1382:2012 | Rubber Vocabulary |
ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
ISO/TR 9272:2005 | Rubber and rubber products Determination of precision for test method standards |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.