Skip to content
Please enter a keyword to search

  • EN ISO 472:2013

    Current The latest, up-to-date edition.

    Plastics - Vocabulary (ISO 472:2013)

    Available format(s): 

    Language(s): 

    Published date:  06-02-2013

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Terms and definitions
    Bibliography

    Abstract - (Show below) - (Hide below)

    ISO 472:2013 defines terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61) and general terms and definitions of polymer science used in all aspects of plastics technology.In addition to terms in English and French (two of the three official ISO languages), this vocabulary includes the equivalent terms in German; these have been included under the responsibility of the member body for Germany (DIN). However, only the terms and definitions in the official languages can be considered as ISO terms and definitions.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 249
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    13/30280703 DC : 0 BS EN 1329-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    DIN EN 13245-3:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
    PREN 1451-1 : DRAFT 2016 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    16/30342057 DC : 0 BS EN 17033 - PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS
    16/30336859 DC : 0 BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    14/30310352 DC : 0 BS EN 12200-1 - PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    PREN 1519-1 : DRAFT 2017 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM
    DIN EN 15701 E : 2017 PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
    DIN EN 15870 E : 2009 ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
    BS EN 17098-2:2018 Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Method for film permeability determination using a static technique
    09/30209028 DC : 0 BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    12/30258334 DC : 0 BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    DIN EN 13245-2:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes (includes Corrigendum AC:2009)
    14/30311109 DC : 0 BS EN 1453-1 - PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
    DIN EN 13245-2 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
    08/30168672 DC : DRAFT AUG 2008 BS EN 15857 - NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
    DIN EN 15422:2008-06 Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes
    DIN 55657:2016-08 Paints and varnishes - Test method for evaluation of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage
    DIN EN 15345:2008-02 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
    S.R. CEN/TS 16861:2015 PLASTICS - RECYCLED PLASTICS - DETERMINATION OF SELECTED MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLYETHYLENE TEREPHTHALATE (PET)
    BS EN 15422:2008 Precast concrete products. Specification of glassfibres for reinforcement of mortars and concretes
    DIN EN 13476-1:2015-11 (Draft) PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
    UNI EN 16240 : 2014 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
    I.S. EN 16575:2014 BIO-BASED PRODUCTS - VOCABULARY
    S.R. CEN TR 15932:2010 PLASTICS - RECOMMENDATION FOR TERMINOLOGY AND CHARACTERISATION OF BIOPOLYMERS AND BIOPLASTICS
    BS EN 16153 : 2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    S.R. CEN TS 15534-1:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
    UNE-EN 16575:2015 Bio-based products - Vocabulary
    I.S. EN 15701:2016 PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
    UNI CEN/TS 16011 : 2013 PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
    BS EN 131-6:2015 Ladders Telescopic ladders
    UNI EN 1555-1 : 2011 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
    NF EN 1555-1 : 2010 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
    EN ISO 899-2:2003/A1:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)
    DIN EN 13121-1:2003-10 GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions
    EN 13121-1:2003 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
    DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
    DIN EN 12201-1:2011-11 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
    DIN EN 14598-1:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
    BS EN 14020-3:2002 Reinforcements. Specification for textile glass rovings Specific requirements
    UNE-EN 12200-1:2017 Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    BS EN 15347:2007 Plastics. Recycled Plastics. Characterization of plastics waste
    BS EN 14408-1:2004 Plastics piping systems for renovation of underground gas supply networks General
    DIN EN 15342 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
    BS EN 13677-2:2003 Reinforced thermoplastic moulding compounds. Specification for GMT Methods of test and general requirements
    UNE-EN 16245-2:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
    BS EN 14118-1:2003 Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Designation
    BS EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
    BS EN 14118-3:2003 Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Specific requirements
    CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
    EN 13360:2002 Rubber- or plastics-coated fabrics - Terminology
    DIN EN 13706-1:2003-02 REINFORCED PLASTICS COMPOSITES - SPECIFICATIONS FOR PULTRUDED PROFILES - PART 1: DESIGNATION
    DIN EN 13706-2:2003-02 REINFORCED PLASTICS COMPOSITES - SPECIFICATIONS FOR PULTRUDED PROFILES - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS
    EN 12201-1:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
    DIN EN 15701:2017-02 PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
    CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
    CEN/TS 16861:2015 Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET)
    DIN EN ISO 15605:2004-11 Adhesives - Sampling (ISO 15605:2000)
    EN 13245-2:2008/AC:2009 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
    DIN EN 14447:2005-07 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005
    DIN EN 14649:2005-07 PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST)
    EN 12666-1:2005+A1:2011 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
    EN 1013:2012+A1:2014 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    EN 61212-3-3:2006 INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: ROUND LAMINATED MOULDED RODS
    EN 13245-3:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
    18/30371677 DC : DRAFT MAY 2018 BS EN 1401-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS
    PD CEN/TS 16011:2013 Plastics. Recycled plastics. Sample preparation
    14/30273514 DC : 0 BS ISO 18249 - NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING - TESTING OF FIBRE REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
    11/30246452 DC : 0 BS EN 14758-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    UNI EN 15343 : 2008 PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT
    12/30266170 DC : 0 BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
    PREN 17098-2 : DRAFT 2017 PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
    11/30239977 DC : 0 BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS
    DIN EN 16245-2:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
    17/30364341 DC : 0 BS EN 1519-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM
    PD CEN/TS 16861:2015 Plastics. Recycled plastics. Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET)
    17/30361211 DC : 0 BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
    BS EN 1013 : 2012 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    EN 15344:2007 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
    DIN EN 15857:2010-05 Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria
    07/30169818 DC : 0 BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    16/30332879 DC : 0 BS EN 1451-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    PREN 1329-1 : DRAFT 2013 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    17/30360679 DC : DRAFT SEP 2017 BS EN 17152-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND CONVEYANCE AND STORAGE OF NON-POTABLE WATER - BOXES USED FOR INFILTRATION, ATTENUATION AND STORAGE SYSTEMS - PART 1: SPECIFICATIONS FOR STORM WATER BOXES MADE OF PP AND PVC
    07/30165577 DC : 0 BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    DIN EN 13245-3 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
    UNI EN 15857 : 2010 NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
    DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products
    UNI EN 15345 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
    UNI EN 15870 : 2009 ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
    PREN 131-2 : DRAFT 2009 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    PREN 1852-1 : DRAFT 2016 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    PREN 513 : DRAFT 2017 PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
    S.R. CEN/TS 16010:2013 PLASTICS - RECYCLED PLASTICS - SAMPLING PROCEDURES FOR TESTING PLASTICS WASTE AND RECYCLATES
    PD CEN/TR 16953:2017 Medical gloves for single use. Guidance for selection
    S.R. CEN/TR 16149:2011 GUIDANCE DOCUMENT FOR DRAFTING CEN/TC 158 STANDARDS
    PREN 15348 : DRAFT 2013 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
    BS EN 1329-1 : 2014 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    EN 1852-1:2018 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
    I.S. EN 15422:2008 PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASSFIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES
    I.S. EN 13121-1:2003 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
    DIN EN 14758-1:2012-05 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
    DIN EN 14408-1:2004-12 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL
    DIN EN 15343:2008-02 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
    DIN EN 15347:2008-02 Plastics - Recycled Plastics - Characterisation of plastics wastes
    DIN EN 15346 E : 2015 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
    DIN EN 15347 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
    DIN EN 15344:2008-02 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
    DIN EN 15342:2008-02 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
    BS EN ISO 15605:2004 Adhesives. Sampling
    BS EN 14118-2:2003 Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Methods of test and general requirements
    DIN EN 15343 E : 2008 PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT
    BS EN 1401-1:2009 Plastic piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system
    I.S. EN 15346:2014 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
    I.S. EN 131-2:2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    I.S. EN 14052:2012 HIGH PERFORMANCE INDUSTRIAL HELMETS
    DIN EN 14409-1:2004-12 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL
    I.S. EN 13245-1:2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
    I.S. EN 61212-1:2006 INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS
    CEN/TS 16010:2013 PLASTICS - RECYCLED PLASTICS - SAMPLING PROCEDURES FOR TESTING PLASTICS WASTE AND RECYCLATES
    I.S. EN 397:2012 INDUSTRIAL SAFETY HELMETS
    I.S. EN 12201-1:2011 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
    I.S. EN 61212-3-3:2006 INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: ROUND LAMINATED MOULDED RODS
    I.S. EN 12200-1:2016 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    I.S. EN 1555-1:2010-2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
    I.S. EN 14758-1:2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    DIN EN 1453-1:2017-09 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
    I.S. EN 1453-1:2017 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1 - SPECIFICATIONS FOR PIPES AND THE SYSTEM
    I.S. EN ISO 899-2:2003 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING (ISO 899-2:2003)
    I.S. EN 12666-1:2006 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    UNI CEN/TS 16010 : 2013 PLASTICS - RECYCLED PLASTICS - SAMPLING PROCEDURES FOR TESTING PLASTICS WASTE AND RECYCLATES
    I.S. EN 14118-2:2003 REINFORCEMENT - SPECIFICATIONS FOR TEXTILE GLASS MATS (CHOPPED STRAND AND CONTINUOUS FILAMENT MATS) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS
    CEI EN 60903 : 2005 LIVE WORKING - GLOVES OF INSULATING MATERIAL IMPIANTI
    PREN 1401-1 : DRAFT 2018 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS
    10/30212144 DC : 0 BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
    15/30327642 DC : 0 BS EN 13476-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
    BS EN 1451-1:2017 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Specifications for pipes, fittings and the system
    PD CEN/TR 15932:2010 Plastics. Recommendation for terminology and characterisation of biopolymers and bioplastics
    PD CEN/TR 15438:2007 Plastics piping systems. Guidance for coding of products and their intended uses
    DIN EN 1013:2015-03 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    PREN 12200-1 : DRAFT 2014 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    BS EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
    BS EN 16575:2014 Bio-based products. Vocabulary
    08/30185535 DC : DRAFT JULY 2008 BS EN ISO 1452-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) - PART 1: GENERAL
    UNE-EN 15348:2015 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
    UNI EN 15347 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
    DIN EN 16575 E : 2014 BIO-BASED PRODUCTS - VOCABULARY
    BS EN 15345:2007 Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates
    08/30194094 DC : 0 BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
    DIN EN 15701:2015-02 (Draft) PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
    PD CEN/TS 16010:2013 Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates
    04/30091878 DC : DRAFT FEB 2004 BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    08/30191143 DC : 0 BS EN 1555-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
    PREN 1453-1 : DRAFT 2014 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
    UNI EN 13245-2 : 2009 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
    11/30238648 DC : DRAFT FEB 2011 BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    UNI EN 1329-1 : 2014 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    DIN EN 131-6:2015-05 LADDERS - PART 6: TELESCOPIC LADDERS
    DIN EN 16153:2015-05 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    EN 1451-1:2017 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
    UNI CEN/TR 15932 : 2010 PLASTICS - RECOMMENDATION FOR TERMINOLOGY AND CHARACTERISATION OF BIOPOLYMERS AND BIOPLASTICS
    UNI EN 15342 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
    I.S. EN 131-6:2015 LADDERS - PART 6: TELESCOPIC LADDERS
    UNI EN 16575 : 2014 BIO-BASED PRODUCTS - VOCABULARY
    I.S. EN 1451-1:2017 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    I.S. EN 16240:2013 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    BS EN 1852-1:2018 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Specifications for pipes, fittings and the system
    I.S. EN 15870:2009 ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
    I.S. EN 16245-2:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
    CEN/TR 16953:2017 Medical gloves for single use - Guidance for selection
    I.S. EN 13245-3:2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
    EN 17098-2:2018 Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique
    EN 17098-1:2018 Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films
    PRCEN/TS 16861 : DRAFT 2014 PLASTICS - RECYCLED PLASTICS - DETERMINATION OF SELECTED MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLYETHYLENE TEREPHTHALATE (PET)
    UNI EN 13245-3 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
    EN 131-6:2015 Ladders - Part 6: Telescopic ladders
    EN 17033:2018 Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods
    DIN EN 1555-1:2010-12 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
    DIN EN 1453-1:2000-03 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
    DIN EN 14447 E : 2005 FIBRE REINFORCED PLASTICS - GLASS MAT REINFORCED THERMOPLASTICS (GMT) - DETERMINATION OF FLOWABILITY AND SOLIDIFICATION
    DIN EN 12666-1:2011-11 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system (includes Amendment A1:2011)
    DIN EN 14649 E : 2005 PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST)
    DIN EN 15346:2015-01 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
    UNE-EN 1453-1:2017 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system
    BS EN 13121-1:2003 GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions
    UNE-EN 14758-1:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
    BS EN 397 : 2012 INDUSTRIAL SAFETY HELMETS
    BS EN 12201-1:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General
    BS EN 13706-2:2002 Reinforced plastics composites. Specifications for pultruded profiles Method of test and general requirements
    BS EN 13421:2006 Plastics. Thermoset moulding compounds. Composites and reinforcement fibres. Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
    DIN EN 15344 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
    EN 14118-3:2003 Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements
    EN 14408-1:2004 Plastics piping systems for renovation of underground gas supply networks - Part 1: General
    EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
    EN 14118-1:2003 Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation
    EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
    UNI EN 13245-1 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
    UNI EN 397 : 2013 INDUSTRIAL SAFETY HELMETS
    UNI EN 16245-2 : 2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
    UNI EN 12201-1 : 2012 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
    UNI EN 12666-1 : 2011 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    UNI EN 14052 : 2013 HIGH PERFORMANCE INDUSTRIAL HELMETS
    EN 14020-3:2002 Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements
    UNI EN 1401-1 : 2009 PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    UNI EN 14758-1 : 2012 PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    DIN EN 15857 E : 2010 NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
    DIN EN 16240:2014-03 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    S.R. CEN/TR 16953:2017 MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION
    09/30206298 DC : 0 BS EN 16011 - PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
    UNI EN 15344 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
    I.S. EN ISO 15605:2004 ADHESIVES - SAMPLING
    DD CEN/TS 14758-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s) (PP-MD) Guidance for the assessment of conformity
    I.S. EN 1329-1:2014 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    BS EN 60903:2003 Live working. Gloves of insulating material
    UNI EN 15422 : 2008 PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASS-FIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES
    PREN 131-6 : DRAFT 2017 LADDERS - PART 6: TELESCOPIC LADDERS
    BS EN 13245-3:2010 Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications Designation of PVC-UE profiles
    I.S. EN 14408-1:2004 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL
    08/30170590 DC : DRAFT JULY 2008 BS EN ISO 12543-1 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS
    BS EN 15870:2009 Adhesives. Determination of tensile strength of butt joints
    BS EN 16245-2:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers
    04/30091867 DC : DRAFT FEB 2004 BS EN ISO 12086-1 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
    BS EN 15857:2010 Non-destructive testing. Acoustic emission. Testing of fibre-reinforced polymers. Specific methodology and general evaluation criteria
    17/30348289 DC : 0 BS EN 17098-2 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
    DIN EN 15345 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
    09/30206295 DC : 0 BS EN 16010 - PLASTICS - RECYCLED PLASTICS - SAMPLING PROCEDURES FOR TESTING PLASTICS WASTE AND RECYCLATES
    UNE-EN 15857:2010 Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria
    DIN EN 15348:2015-01 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
    BS EN 15348:2014 Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates
    PD CEN/TR 16149:2011 Guidance Document for drafting CEN/TC 158 Standards
    DIN EN 15422 E : 2008 PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASSFIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES
    S.R. CEN/TS 16011:2013 PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
    I.S. EN 13245-2:2008 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
    I.S. EN 60903:2003 LIVE WORKING - GLOVES OF INSULATING MATERIAL
    I.S. EN 17098-2:2018 PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
    I.S. EN 17033:2018 PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS
    BS EN 13476-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) General requirements and performance characteristics
    I.S. EN 1013:2012 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    BS EN 17098-1:2018 Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Specifications for barrier films
    PREN 13476-1 : DRAFT 2015 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLSEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
    PREN 14758-1 : DRAFT 2011 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    EN 13476-1:2018 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristics
    I.S. EN 15345:2007 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
    DIN EN 14052:2013-04 High performance industrial helmets (includes Amendment A1:2012)
    DIN EN 397:2013-04 Industrial safety helmets (includes Amendment A1:2012)
    BS EN 1453-1:2000 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly (vinyl chloride) (PVC-U) Specifications for pipes and the system
    ISO 2535:2001 Plastics Unsaturated-polyester resins Measurement of gel time at ambient temperature
    BS EN ISO 2535:2002 Plastics. Unsaturated polyester resins. Measurement of gel time at ambient temperature
    BS EN 14649:2005 Precast concrete products. Test method for strength retention of glass fibres in cement and concrete (SIC test)
    ISO 19952:2005 Footwear Vocabulary
    BS EN 13677-3:2003 Reinforced thermoplastic moulding compounds. Specification for GMT Specific requirements
    BS EN 131-2 : 2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    EN 1453-1:2017/AC:2017 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
    BS EN ISO 899-2 : 2003 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING
    ISO 15605:2000 Adhesives Sampling
    DIN EN 13245-1 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
    UNE-EN 1555-1:2011 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
    BS EN 12200-1:2016 Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system
    DIN EN 13245-1:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
    BS EN 14409-1:2004 Plastics piping systems for renovation of underground water supply networks General
    ISO 15493:2003 Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series
    BS EN 12666-1 : 2005 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    BS EN 14020-1:2002 Reinforcements. Specification for textile glass rovings Designation
    BS EN 14020-2:2002 Reinforcements. Specification for textile glass rovings Methods of test and general requirements
    BS EN 13245-1:2010 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Designation of PVC-U profiles
    BS EN ISO 19952:2006 Footwear. Vocabulary
    BS EN 14758-1:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD) Specifications for pipes, fittings and the system
    UNE-EN 1013:2013 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
    BS EN 14052 : 2012 HIGH PERFORMANCE INDUSTRIAL HELMETS
    BS EN 15342:2007 Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates
    UNE-CEN/TR 15438:2012 IN Plastics piping systems - Guidance for coding of products and their intended uses
    UNE-CEN/TS 16011:2015 EX Plastics - Recycled plastics - Sample preparation
    BS EN ISO 3672-1:2001 Plastics. Unsaturated-polyester resins (UP-R) Designation system
    BS EN 61212-3-3:2006 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Specifications for individual materials - Round laminated moulded rods
    ISO 899-2:2003 Plastics Determination of creep behaviour Part 2: Flexural creep by three-point loading
    EN 15342:2007 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
    EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
    EN 15422:2008 Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes
    EN 14409-1:2004 Plastics piping systems for renovation of underground water supply networks - Part 1: General
    EN 14649 : 2005 PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST)
    EN 15857:2010 Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria
    EN 15343:2007 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
    EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
    EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
    EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
    EN 15347:2007 Plastics - Recycled Plastics - Characterisation of plastics wastes
    EN ISO 2535 : 2002 PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT AMBIENT TEMPERATURE (ISO 2535:2001)
    EN ISO 19952 : 2005 Footwear - Vocabulary (ISO 19952:2005)
    EN 397:2012+A1:2012 Industrial safety helmets
    EN 14020-2:2002 Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements
    EN 1401-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    EN 15345:2007 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
    EN 13706-2:2002 Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements
    EN 15870:2009 Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified)
    EN 15348:2014 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
    EN 14052:2012+A1:2012 High performance industrial helmets
    EN 16575:2014 Bio-based products - Vocabulary
    EN 14020-1:2002 Reinforcements - Specification for textile glass rovings - Part 1: Designation
    EN 13706-1:2002 Reinforced plastics composites - Specifications for pultruded profiles - Part 1: Designation
    EN ISO 15493:2003/A1:2017 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)
    EN 14758-1:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
    EN 14118-2:2003 Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements
    EN 15701:2016 (edition 2) Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods
    EN 14598-1:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
    EN 13887:2003 Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
    EN 15346:2014 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
    I.S. EN 1852-1:2018 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    17/30363924 DC : 0 BS EN 17176-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL
    DIN EN 15870:2009-08 ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
    13/30277400 DC : 0 BS EN 131-6 - LADDERS - PART 6: TELESCOPIC LADDERS
    17/30348286 DC : 0 BS EN 17098-1 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
    PREN 17176-1 : DRAFT 2017 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL
    04/30091874 DC : DRAFT FEB 2004 BS EN ISO 13000-1 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 1: REQUIREMENTS AND DESIGNATION
    I.S. EN 15534-1:2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
    13/30276234 DC : 0 BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
    I.S. EN 14409-1:2004 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL
    UNE-EN 15346:2015 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
    05/30111233 DC : 0 BS EN 13245-2 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
    DIN EN 16575:2014-10 BIO-BASED PRODUCTS - VOCABULARY
    BS EN 15534-1 : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
    13/30276237 DC : 0 BS EN 15348 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
    DIN EN 15348 E : 2015 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
    06/19970535 DC : DRAFT AUG 2006 EN 13476-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
    NF EN 13245-3 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
    03/110340 DC : 0 BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    I.S. EN 15344:2007 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
    08/30189974 DC : DRAFT DEC 2008 BS EN 13245-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
    14/30318870 DC : 0 BS PD CEN/TS 16861 - PLASTICS - RECYCLED PLASTICS - DETERMINATION OF SELECTED MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLYETHYLENE TEREPHTHALATE (PET)
    02/124518 DC : DRAFT DEC 2002 EN 14598-1 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 1: DESIGNATION
    PREN 15346 : DRAFT 2013 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
    I.S. EN 13476-1:2007 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
    UNE-EN 13245-3:2011 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
    04/30091870 DC : DRAFT FEB 2004 BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    UNI EN 1013 : 2015 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    EN 1329-1:2014+A1:2018 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems
    I.S. EN 17098-1:2018 PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
    I.S. EN 15348:2014 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
    I.S. EN 16153:2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
    S.R. CEN/TR 15353:2007 PLASTICS - RECYCLED PLASTICS - GUIDELINES FOR THE DEVELOPMENT OF STANDARDS FOR RECYCLED PLASTICS
    UNE-CEN/TR 15932:2010 IN Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics
    17/30363915 DC : 0 BS EN 131-6 - LADDERS - PART 6: TELESCOPIC LADDERS
    DIN EN 131-6 E : 2015 LADDERS - PART 6: TELESCOPIC LADDERS
    I.S. EN 15857:2010 NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
    DIN EN 1401-1:2009-07 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    DIN EN 12200-1:2016-10 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    UNE-EN 13245-1:2011 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
    BS EN 15343:2007 Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content
    I.S. EN 1401-1:2009 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    BS EN 14447:2005 Fibre reinforced plastics. Glass mat reinforced thermoplastics (GMT). Determination of flowability and solidification
    BS EN 13706-1:2002 Reinforced plastics composites. Specifications for pultruded profiles Designation
    UNE-EN 12201-1:2012 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
    BS EN 13887:2003 Structural adhesives. Guidelines for surface preparation of metals and plastics prior to adhesive bonding
    BS EN ISO 15493 : 2003 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003)
    BS EN 13360:2002 Rubber- or plastics-coated fabrics. Terminology
    BS EN 61212-1:2006 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Definitions, designations and general requirements
    BS EN 15346:2014 Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
    BS EN 15344:2007 Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates
    BS EN ISO 10724-1:2001 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) General principles and moulding of multipurpose test specimens
    BS EN 14598-1:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Designation
    EN 12200-1:2016 Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
    EN ISO 15605:2004 Adhesives - Sampling (ISO 15605:2000)
    CEN/TR 15932:2010 Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics
    CEN/TR 16149:2011 Guidance Document for drafting CEN/TC 158 Standards
    EN 131-2:2010+A2:2017 Ladders - Part 2: Requirements, testing, marking
    EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
    EN 13245-1:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
    EN 60903 : 2003 COR 2005 LIVE WORKING - GLOVES OF INSULATING MATERIAL
    DIN EN 13887:2003-11 STRUCTURAL ADHESIVES - GUIDELINES FOR SURFACE PREPARATION OF METALS AND PLASTICS PRIOR TO ADHESIVE BONDING
    EN 61212-1:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
    CEN/TR 15438:2007 Plastics piping systems - Guidance for coding of products and their intended uses
    UNE-EN 12666-1:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
    UNE-EN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 15850:2014 Plastics Determination of tension-tension fatigue crack propagation Linear elastic fracture mechanics (LEFM) approach
    ISO 1139:1973 Textiles — Designation of yarns
    ISO 974:2000 Plastics Determination of the brittleness temperature by impact
    ISO 294-3:2002 Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates
    ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
    ISO 4587:2003 Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
    ISO 294-2:1996 Plastics Injection moulding of test specimens of thermoplastic materials Part 2: Small tensile bars
    ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
    ISO 294-1:2017 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
    ISO 13586:2000 Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach
    ISO 6601:2002 Plastics — Friction and wear by sliding — Identification of test parameters
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective