EN ISO 527-1:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
Superseded date
18-09-2019
Published date
15-02-2012
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle and methods
5 Apparatus
6 Test specimens
7 Number of test specimens
8 Conditioning
9 Procedure
10 Calculation and expression of results
11 Precision
12 Test report
Annex A (informative) - Determination of strain at
yield
Annex B (informative) - Extensometer accuracy for the
determination of Poisson's ratio
Annex C (normative) - Calibration requirements for
the determination of the tensile modulus
Bibliography
ISO 527-1:2012 specifies the general principles for determining the tensile properties of plastics and plastic composites under defined conditions. Several different types of test specimen are defined to suit different types of material which are detailed in subsequent parts of ISO 527.The methods are used to investigate the tensile behaviour of the test specimens and for determining the tensile strength, tensile modulus and other aspects of the tensile stress/strain relationship under the conditions defined.The methods are not normally suitable for use with rigid cellular materials, for which ISO 1926 is used, or for sandwich structures containing cellular materials.
| Committee |
CEN/TC 249
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN ISO 527-1 : 2012 | Identical |
| DIN EN ISO 527-1:2012-06 | Identical |
| UNE-EN ISO 527-1:1996 | Identical |
| SN EN ISO 527-1 : 2012 | Identical |
| BS EN ISO 527-1:2012 | Identical |
| UNI EN ISO 527-1 : 2012 | Identical |
| NEN EN ISO 527-1 : 2012 | Identical |
| NF EN ISO 527-1 : 2012 | Identical |
| SS-EN ISO 527-1:2012 | Identical |
| I.S. EN ISO 527-1:2012 | Identical |
| NS EN ISO 527-1 : 2012 | Identical |
| PN EN ISO 527-1 : 2012 | Identical |
| ISO 527-1:2012 | Identical |
| NBN EN ISO 527-1 : 2012 | Identical |
| UNE-EN ISO 527-1:2012 | Identical |
| BS 2782-3.321(1994) : 1994 AMD 8633 | Identical |
| 08/30180284 DC : DRAFT JUNE 2008 | BS EN 1465 - ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| NF EN 15860 : 2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| NF EN 10245-5 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| DD CLC/TS 50131-2-7-3:2009 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (active) |
| PREN 13491 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| I.S. EN 13766:2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| 16/30338114 DC : 0 | BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| 16/30342057 DC : 0 | BS EN 17033 - PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS |
| 16/30338123 DC : 0 | BS EN 16993 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
| 09/30209028 DC : 0 | BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| 03/104248 DC : DRAFT FEB 2003 | EN 14628 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES IN HIGHLY AGGRESSIVE SOILS - REQUIREMENTS AND TEST METHODS |
| BS EN 4702-05:2017 | Aerospace series. Quick release fastening systems for non-structural and lining applications Retaining washer |
| 16/30341197 DC : 0 | BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| DIN EN 15860 E : 2012 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| 12/30267848 DC : 0 | BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| DIN EN 15345:2008-02 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| DIN EN 14963 E : 2006 | ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| 10/30216993 DC : 0 | BS EN 295-4 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| 06/30153191 DC : 0 | BS EN 15542 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| UNI EN 16240 : 2014 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15502-2-1:2012 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| PREN 13160-7 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| PREN 4702-05 : DRAFT 2016 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS WITH NON METALLIC STUD FOR NON-STRUCTURAL APPLICATIONS - PART 05: RETAINING WASHER |
| I.S. EN 50131-2-8:2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS |
| BS EN ISO 12215-1:2000 | Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate |
| S.R. CLC/TS 50131-2-7-3:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE) |
| I.S. EN 15345:2007 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| I.S. EN 13565-1:2004 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| I.S. EN 17098-1:2018 | PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS |
| DIN EN 15382:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| BS EN 13493:2013 | Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites |
| EN ISO 9093-2:2002 | Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) |
| BS EN 15382:2013 | Geosynthetic barriers. Characteristics required for use in transportation infrastructure |
| UNI EN 15860 : 2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| 16/30317348 DC : 0 | BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| EN 13491:2018 | Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures |
| I.S. EN 14963:2006 | ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| I.S. EN 50290-2-23:2013 | COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES |
| EN 13206:2017 | Plastics - Thermoplastic covering films for use in agriculture and horticulture |
| DIN EN 13592:2015-09 (Draft) | PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| DIN EN 14598-3:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
| DIN EN 26:2015-08 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| DIN EN 14598-2:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements |
| BS EN 14471 : 2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| BS EN 13492:2013 | Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
| BS EN 15347:2007 | Plastics. Recycled Plastics. Characterization of plastics waste |
| BS EN 14415:2004 | Geosynthetic barriers. Test method for determining the resistance to leaching |
| DIN EN 15342 E : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
| BS EN ISO 1622-2:1999 | Plastics. Polystrene (PS) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 11542-2 : 1999 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 1873 : 2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| BS EN 14628:2005 | Ductile iron pipes, fittings and accessories. External polythene coating for pipes. Requirements and test methods |
| I.S. EN ISO 7823-1:2003 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
| I.S. EN 89:2015 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| EN 13349:2002 | Copper and coppper alloys - Pre-insulated copper tubes with solid covering |
| DIN EN 13492:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
| EN 1013:2012+A1:2014 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13592:2017-05 | PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| EN 1337-2:2004 | Structural bearings - Part 2: Sliding elements |
| EN 61965:2003 | Mechanical safety of cathode ray tubes |
| EN 50131-2-8:2016 | Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
| DIN EN 15502-2-1:2017-09 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW (includes Amendment 1:2016) |
| EN 13160-7:2016 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| EN 1337-5:2005 | Structural bearings - Part 5: Pot bearings |
| DIN EN 15382:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| ONORM EN ISO 11542-2 : 2009 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNE-EN 50290-2-23:2014 | Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
| I.S. EN 4702-03:2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING |
| I.S. EN 13492:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| UNE-EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| 17/30353428 DC : DRAFT JUNE 2017 | BS EN 17129 - CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION |
| I.S. EN 483:2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| BS EN 50290-2-23:2013 | Communication cables Common design rules and construction. Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
| 01/107932 DC : DRAFT NOV 2001 | BS EN 1504-5 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
| 12/30258334 DC : 0 | BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 12226 : DRAFT 2010 | GEOSYNTHETICS - GENERAL TESTS FOR EVALUATION FOLLOWING DURABILITY TESTING |
| EN 15344:2007 | Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
| BS EN 50131-2-8:2016 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Shock detectors |
| 07/30169818 DC : 0 | BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 17/30335121 DC : 0 | BS EN 13655 - PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE |
| 16/30317340 DC : 0 | BS EN 14932 - PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING SILAGE BALES - REQUIREMENTS AND TEST METHODS, CONDITIONS OF USE AND REMOVAL |
| S.R. CLC/TS 50131-2-7-1:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC) |
| UNI EN 15542 : 2008 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| DIN EN 15542 E : 2008 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| EN 4702-05:2017 | Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer |
| 17/30360679 DC : DRAFT SEP 2017 | BS EN 17152-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND CONVEYANCE AND STORAGE OF NON-POTABLE WATER - BOXES USED FOR INFILTRATION, ATTENUATION AND STORAGE SYSTEMS - PART 1: SPECIFICATIONS FOR STORM WATER BOXES MADE OF PP AND PVC |
| 08/30184645 DC : DRAFT SEP 2008 | BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| 14/30301266 DC : 0 | BS EN 13160-7 - LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| 11/30250549 DC : 0 | BS EN 14471 - CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| PREN 13592 : DRAFT 2015 | PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| UNE-EN 13493:2013 | Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites |
| 04/30109201 DC : DRAFT OCT 2004 | EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| 05/30127634 DC : DRAFT JAN 2005 | PREN 13566-7 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NONPRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY WOUND UNPLASTICIZED POLY (VINYLE CHLORIDE) (PVC-U) PIPES |
| BS ISO 7391-2 : 1996 AMD 10746 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DD CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
| BS EN 50465:2015 | European product standard for combined heating power systems using gas fuel |
| UNI EN 15345 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| PREN 15860 : DRAFT 2016 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| PREN 131-2 : DRAFT 2009 | LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| DIN EN 13361:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| PREN 14471 : DRAFT 2011 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13491:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| EN 13361:2018 | Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams |
| DIN EN 13492:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| UNE-EN 15382:2013 | Geosynthetic barriers - Characteristics required for use in transportation infrastructure |
| ISO 7823-2:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets |
| PREN 14932 : DRAFT 2016 | PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING SILAGE BALES - REQUIREMENTS AND TEST METHODS, CONDITIONS OF USE AND REMOVAL |
| PREN 13362 : DRAFT 2012 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| CLC/TS 50131-2-7-1:2009 | Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) |
| EN 13565-1:2003+A1:2007 | Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components |
| EN 50465 : 2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| I.S. EN 13361:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| I.S. EN 50465:2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| DIN EN 89:2015-08 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| DIN EN 13206:2015-09 (Draft) | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| DIN EN 1465:2009-07 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| DIN EN 13493:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| DIN EN 15347:2008-02 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| DIN EN 15346 E : 2015 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| DIN EN 15347 E : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
| DIN EN 14716:2005-03 | Stretched ceilings - Requirements and tests methods; German version EN 14716:2004 |
| DIN EN 14427:2014-09 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| DIN EN 14471:2015-03 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 1337-5:2005-07 | Structural bearings - Part 5: Pot bearings |
| DIN EN 13361:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| BS EN 1465:2009 | Adhesives. Determination of tensile lap-shear strength of bonded assemblies |
| BS EN ISO 15526-2:2004 | Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings |
| BS EN 26:1998 | Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners |
| BS EN 1337-5:2005 | Structural bearings Pot bearings |
| BS EN 1337-2:2004 | Structural bearings Sliding elements |
| BS EN 14716:2004 | Stretched ceilings. Requirements and test methods |
| BS EN 14598-2:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements |
| I.S. EN 15346:2014 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| I.S. EN 14471:2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 15526-2:2004 | PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 13160-7:2016 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| I.S. EN 13592:2017 | PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| I.S. EN 131-2:2010 | LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| I.S. EN 14628:2005 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1504-5:2013 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
| I.S. EN 26:2015 | GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| I.S. EN ISO 4894-2:1999 | PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 1873:2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN ISO 11542-2:1999 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 15526-2:2004-10 | PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 1337-2:2004 | STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
| DIN EN 13349:2002-11 | Copper and copper alloys - Pre-insulated copper tubes with solid covering; German version EN 13349:2002 |
| EN ISO 11542-2:1998/AC:2008 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 295-4:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| I.S. EN 14427:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| DIN EN 1873:2016-07 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 1465:2009 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| VDI 3388:2012-03 | Materials for trimming and forming dies |
| NF EN 12245 : 2009 + A1 2012 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| VDI 3405 Blatt 1:2013-10 | Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control |
| VDI 2019:2016-04 | Testing the adhesion of thermoplastic elastomers (TPE) on substrates |
| DIN EN 15836-1:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| PREN 13766 : DRAFT 2016 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| DIN EN 15502-2-1:2013-01 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| BS EN 4702-03:2017 | Aerospace series. Quick release fastening systems for non-structural and lining applications Stud - quick-release and locking |
| BS EN 15860:2010 | Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods |
| DIN EN 1013:2015-03 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 13361:2013 | Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams |
| BS EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods |
| 16/30338117 DC : 0 | BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| 16/30330752 DC : 0 | BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| DIN EN 15382 E : 2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| DD CLC/TS 50131-2-7-2:2009 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (passive) |
| NF EN 13766 : 2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| UNI EN 15347 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
| BS 2782-3.326F(1997) : 1997 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
| BS EN 15345:2007 | Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates |
| 04/30091878 DC : DRAFT FEB 2004 | BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 04/30113880 DC : DRAFT MAY 2004 | BS EN 14932 - PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING BALES - REQUIREMENTS AND TEST METHODS |
| DIN EN 14963:2006-12 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| BS EN 1013 : 2012 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 11/30238648 DC : DRAFT FEB 2011 | BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN 4702-03 : 2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING |
| PREN 4702-03 : DRAFT 2016 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS WITH NON METALLIC STUD FOR NON-STRUCTURAL APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING |
| EN ISO 14631 : 1999 | EXTRUDED SHEETS OF IMPACT-MODIFIED POLYSTYRENE (PS-I) - REQUIREMENTS AND TEST METHODS |
| DIN EN 13766:2010-11 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| UNI EN 15342 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
| UNE-EN 13491:2013 | Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures |
| I.S. EN 16240:2013 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN 15502-2-1 : 2012 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| I.S. EN 13491:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| DIN EN 13362:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| PREN 13655 : DRAFT 2016 | PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE |
| I.S. EN 15836-1:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| PREN 295-4 : DRAFT 2010 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| EN 13493:2018 | Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites |
| EN 17098-1:2018 | Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films |
| EN 13207:2018 | Plastics - Thermoplastic silage films and tubes for use in agriculture |
| DIN EN 13565-1:2016-08 (Draft) | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| EN 13766:2010 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
| PREN 17096 : DRAFT 2017 | GEOSYNTHETICS - TEST METHOD FOR THE DETERMINATION OF THE STRAIN HARDENING MODULUS OF HDPE GEOSYNTHETIC BARRIERS |
| EN 14932:2018 | Plastics - Thermoplastic stretch films for wrapping silage bales |
| EN 17033:2018 | Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods |
| I.S. EN 13207:2018 | PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE |
| UNE-EN 15860:2011 | Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods |
| UNE-EN 13160-7:2017 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| BS EN 13206:2017 | Plastics. Thermoplastic covering films for use in agriculture and horticulture |
| DIN EN 13566-7:2007-06 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES |
| DIN EN ISO 527-4:1997-07 | Determination of tensile properties of plastics - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997) |
| DIN EN 295-4:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| DIN EN 14628 E : 2006 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| DIN EN 14471 E : 2015 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14867 E : 2005 | PACKAGING - PLASTIC FREEZER BAGS - SPECIFICATIONS AND TEST METHODS |
| DIN EN 1337-5 E : 2005 | STRUCTURAL BEARINGS - PART 5: POT BEARINGS |
| DIN EN 15346:2015-01 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| DIN EN 15342:2008-02 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| DIN EN 1337-2:2004-07 | Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004 |
| DIN EN 15344:2008-02 | Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
| BS EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
| BS EN 13592:2017 | Plastics sacks for household waste collection. Types, requirements and test methods |
| DIN EN 13206:2017-05 | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| DIN EN 15344 E : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES |
| DIN EN 14427 E : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| EN 1504-5:2013 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
| EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| UNI EN 1465 : 2009 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH BONDED ASSEMBLIES |
| UNI EN 1337-2 : 2004 | STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
| EN 50465:2015 | Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW |
| UNI EN 14427 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| UNI EN 10245-1 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| UNI EN 295-4 : 2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| EN 483:1999/A4:2007 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| UNI EN 1504-5 : 2013 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
| I.S. EN ISO 14126:2000 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION |
| 12/30267854 DC : 0 | BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN CONSTRUCTION AND TUNNELS AND ASSOCIATED UNDER GROUND STRUCTURES |
| 12/30267845 DC : 0 | BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| 12/30258456 DC : 0 | BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN 15542:2008-06 | Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods |
| UNI EN 15344 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES |
| UNI EN 15836-1 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| BS EN 15836-1:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| 10/30218935 DC : 0 | BS EN 15502-2-1 - GAS-FIRED HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B[2], B[3] AND B[5] APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| CEI EN 50290-2-23 : 2014 | COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES |
| S.R. CLC/TS 50131-2-7-2:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| 08/30188437 DC : 0 | BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| 04/30091867 DC : DRAFT FEB 2004 | BS EN ISO 12086-1 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| BS 2782-3.326G(1997) : 1997 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES |
| 12/30267851 DC : 0 | BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| DIN EN 15345 E : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| 11/30229997 DC : 0 | BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| 12/30267857 DC : 0 | BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| 12/30268279 DC : 0 | BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| DD CLC/TS 50131-2-7-1:2009 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (acoustic) |
| PREN 13565-1 : DRAFT 2016 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| UNE-EN 13362:2013 | Geosynthetic barriers - Characteristics required for use in the construction of canals |
| DIN EN 16240:2014-03 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 13493 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| PREN 13492 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| 03/119348 DC : 0 | PREN 1013-1 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETING FOR INTERNAL AND EXTERNAL ROOFING, WALL CLADDING AND CEILING FINISHES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 15534-2:2007 | Wood-plastics composites (WPC) Characterisation of WPC materials |
| 08/30181778 DC : DRAFT JULY 2008 | BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| CLC/TS 50131-2-7-2:2009 | Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) |
| I.S. EN ISO 14632:1999 | EXTRUDED SHEETS OF POLYETHYLENE (PE-HD) - REQUIREMENTS AND TEST METHODS |
| BS EN 15542:2008 | Ductile iron pipes, fittings and accessories. External cement mortar coating for pipes. Requirements and test methods |
| I.S. EN 4702-05:2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 05: RETAINING WASHER |
| PREN 13207 : DRAFT 2016 | PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE |
| I.S. EN ISO 9093-2:2002 | SMALL CRAFT - SEACOCKS AND THROUGH-HULL FITTINGS - PART 2: NON-METALLIC |
| UNE-EN 50131-2-8:2017 | Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
| EN 13362:2018 | Geosynthetic Barriers - Characteristics required for use in the construction of canals |
| I.S. EN 13655:2018 | PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE |
| I.S. EN 17033:2018 | PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15860:2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1013:2012 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 15860:2016-07 (Draft) | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| BS EN 17098-1:2018 | Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Specifications for barrier films |
| UNE-EN 13766:2011 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
| BS EN ISO 9093-2:2002 | Small craft. Seacocks and through-hull fittings Non-metallic |
| 14/30311128 DC : 0 | BS EN 14716 - STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS |
| EN 15382:2018 | Geosynthetic barriers - Characteristics required for use in transportation infrastructure |
| EN 13492:2018 | Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
| ISO 9093-2:2002 | Small craft Seacocks and through-hull fittings Part 2: Non-metallic |
| S.R. CEN TS 15534-2:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 2: CHARACTERISATION OF WPC MATERIALS |
| I.S. EN 13493:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| I.S. EN 15382:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| I.S. EN 13362:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| I.S. EN 15542:2008 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13206:2017 | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| DIN EN 14716 E : 2005 | STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 1337-2 E : 2004 | STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
| DIN EN ISO 11542-2:2010-01 | Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008) |
| DIN EN 14415 E : 2004 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR DETERMINING THE RESISTANCE TO LEACHING |
| 02/124520 DC : DRAFT DEC 2002 | EN 14598-3 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 3: SPECIFIC REQUIREMENTS |
| 11/30242263 DC : 0 | BS EN 4691-001 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - TECHNICAL SPECIFICATION |
| BS EN ISO 14126:1999 | Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction |
| BS EN 13566-7:2007 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes |
| BS EN 12576:1998 | Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC |
| BS EN ISO 527-4:1997 | Plastics. Determination of tensile properties Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| ISO 14632:1998 | Extruded sheets of polyethylene (PE-HD) Requirements and test methods |
| BS EN ISO 3672-2:2001 | Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties |
| BS EN 13160-7:2003 | Leak detection systems General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets |
| BS EN 131-2 : 2010 | LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| BS EN 14427:2014 | LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction |
| BS EN 13349:2002 | Copper and copper alloys. Pre-insulated copper tubes with solid covering |
| BS EN ISO 14632:1999 | Extruded sheets of polyethylene (PE-HD). Requirements and test methods |
| BS EN ISO 7823-2:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets |
| ISO 14631:1999 | Extruded sheets of impact-modified polystyrene (PS-I) Requirements and test methods |
| UNE-EN 13592:2017 | Plastics sacks for household waste collection - Types, requirements and test methods |
| ISO 4894-2:1995 | Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| UNE-EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| ISO 3672-2:2000 | Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties |
| ISO 7823-1:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
| BS EN 1504-5:2013 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Concrete injection |
| BS EN ISO 7823-1:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets |
| BS EN 483 : 2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| BS EN 14598-3:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| ISO 11542-2:1998 | Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| UNE-EN 1013:2013 | Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods |
| UNE-EN 1873:2015 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| BS EN 14575:2005 | Geosynthetic barriers. Screening test method for determining the resistance to oxidation |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| UNE-EN 13206:2017 | Plastics - Thermoplastic covering films for use in agriculture and horticulture |
| ISO 14126:1999 | Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
| BS EN 15342:2007 | Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates |
| UNE-EN 89:2016 | Gas-fired storage water heaters for the production of domestic hot water |
| BS EN 14414:2004 | Geosynthetics. Screening test method for determining chemical resistance for landfill applications |
| UNE-EN 26:2016 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN 15342:2007 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
| EN 14628:2005 | Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods |
| EN ISO 15252-2 : 1999 | PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| EN 14471:2013+A1:2015 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| EN 14598-2:2005/AC:2006 | REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
| EN 14963:2006 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| EN 13592:2017 | Plastics sacks for household waste collection - Types, requirements and test methods |
| EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| EN ISO 14529-2 : 1999 | PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 14867:2005 | Packaging - Plastic freezer bags - Specifications and test methods |
| EN ISO 15526-2:2004 | Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000) |
| EN 15345:2007 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| EN ISO 14126:1999/AC:2002 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION |
| EN ISO 3672-2 : 2001 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN ISO 11248 : 1999 | Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993) |
| EN 14575:2005 | Geosynthetic barriers - Screening test method for determining the resistance to oxidation |
| EN ISO 14530-2 : 1999 | PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 14716:2004 | Stretched ceilings - Requirements and test methods |
| EN 1873:2014+A1:2016 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| EN 1465:2009 | Adhesives - Determination of tensile lap-shear strength of bonded assemblies |
| EN 14415:2004 | Geosynthetic barriers - Test method for determining the resistance to leaching |
| EN 15502-2-1:2012+A1:2016 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
| EN ISO 14528-2 : 1999 | PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 26:2015 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| EN ISO 7823-1:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) |
| EN ISO 4894-2 : 1999 | PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
| EN 15542:2008 | Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods |
| EN ISO 7823-2 : 2003 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS |
| EN 14598-3:2005 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
| EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| EN ISO 14527-2 : 1999 | PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 15346:2014 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| EN 14414 : 2004 | GEOSYNTHETICS - SCREENING TEST METHOD FOR DETERMINING CHEMICAL RESISTANCE FOR LANDFILL APPLICATIONS |
| PREN 13361 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| BS EN 14963:2006 | Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods |
| PREN 14716 : DRAFT 2014 | STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS |
| 16/30338108 DC : DRAFT JULY 2016 | BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| 17/30348286 DC : 0 | BS EN 17098-1 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS |
| I.S. EN 13566-7:2007 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES |
| I.S. EN 14932:2018 | PLASTICS - THERMOPLASTIC STRETCH FILMS FOR WRAPPING SILAGE BALES |
| 13/30276234 DC : 0 | BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| 17/30335124 DC : 0 | BS EN 13207 - PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE |
| BS EN 61965:2003 | Mechanical safety of cathode ray tubes |
| UNE-EN 15346:2015 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| UNE-EN 13492:2013 | Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
| BS EN 13565-1 : 2003 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| 15/30325373 DC : 0 | BS EN 13592 - PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| EN ISO 14632 : 1998 | EXTRUDED SHEETS OF POLYETHYLENE (PE-HD) - REQUIREMENTS AND TEST METHODS |
| 10/30216645 DC : 0 | BS EN 12226 - GEOSYNTHETICS - GENERAL TESTS FOR EVALUATION FOLLOWING DURABILITY TESTING |
| 16/30338111 DC : 0 | BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| 03/110340 DC : 0 | BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| I.S. EN 15344:2007 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES |
| 04/30099887 DC : DRAFT MAY 2004 | PREN 14963 - ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| 16/30338120 DC : 0 | BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| PREN 15346 : DRAFT 2013 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| 04/30091870 DC : DRAFT FEB 2004 | BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI EN 1013 : 2015 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 03/310127 DC : DRAFT JUNE 2003 | EN 14716 - STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS |
| 16/30338126 DC : 0 | BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| I.S. EN 61965:2003 | MECHANICAL SAFETY OF CATHODE RAY TUBES |
| NF EN 15836-1 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| S.R. CEN TS 15534-1:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
| CLC/TS 50131-2-7-3:2009 | Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) |
| 17/30353406 DC : 0 | BS EN 17096 - GEOSYNTHETICS - TEST METHOD FOR THE DETERMINATION OF THE STRAIN HARDENING MODULUS OF HDPE GEOSYNTHETIC BARRIERS |
| BS EN 13362:2018 | Geosynthetic Barriers. Characteristics required for use in the construction of canals |
| EN 13655:2018 | Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture |
| PREN 17129 : DRAFT 2017 | CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION |
| BS EN 13766:2010 | Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification |
| EN 15860:2010 | Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods |
| I.S. CEN TS 15354:2006 | PLASTICS - EXTRUDED AND/OR CALENDERED, NON-REINFORCED FILM AND SHEETING MADE OF PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) - GUIDANCE FOR CHARACTERISATION AND DESIGNATION |
| DIN EN 14414 E : 2004 | GEOSYNTHETICS - SCREENING TEST METHOD FOR DETERMINING CHEMICAL RESISTANCE FOR LANDFILL APPLICATIONS |
| DIN EN 14575 E : 2005 | GEOSYNTHETIC BARRIERS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO OXIDATION |
| DIN EN 1504-5:2013-06 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
| BS EN 13199-3:2000 | Packaging. Small load carrier systems Bond Stackable System (BSS) |
| BS EN ISO 1163-2:2000 | Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 14631:1999 | Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods |
| UNE-EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
| BS EN 14867:2005 | Packaging. Plastic freezer bags. Specifications and test methods |
| BS EN 12814-7:2002 | Testing of welded joints of thermoplastics semi-finished products Tensile test with waisted test specimens |
| BS EN 15344:2007 | Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates |
| ISO 15526-2:2000 | Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN 15346:2014 | Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates |
| 02/124519 DC : DRAFT DEC 2002 | EN 14598-2 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
| EN 13473-2:2001 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements |
| EN 13199-3:2000 | Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS) |
| DIN EN 13362:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| I.S. EN ISO 527-4:1997 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
| DIN EN 14867:2005-09 | Packaging - Plastic freezer bags - Specifications and test methods; German version EN 14867:2005 |
| DIN EN 13493:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| EN 12814-7:2002 | Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens |
| EN ISO 527-4:1997 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
| EN 131-2:2010+A2:2017 | Ladders - Part 2: Requirements, testing, marking |
| EN 50290-2-23:2013 | COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES |
| DIN EN 12814-7:2003-01 | Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German version EN 12814-7:2002 |
| DIN EN 14575:2005-07 | Geosynthetic barriers - Screening test method for determining the resistance to oxidation; German version EN 14575:2005 |
| DIN EN 14415:2004-08 | Geosynthetic barriers - Test method for determining the resistance to leaching |
| DIN EN 14414:2004-08 | Geosynthetics - Screening test method for determining chemical resistance for landfill applications |
| DIN EN 483:2000-06 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| CEN/TS 15534-2:2007 | Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials |
| EN 13566-7:2007 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes |
| CEN/TS 15354:2006 | Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation |
| DIN EN 14628:2006-01 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12814-7:2002 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 7: TENSILE TEST WITH WAISTED TEST SPECIMENS |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| ISO 1926:2009 | Rigid cellular plastics Determination of tensile properties |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 294-1:2017 | Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO 20753:2008 | Plastics Test specimens |
| ISO 16012:2015 | Plastics Determination of linear dimensions of test specimens |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.