• EN ISO 5349-1 : 2001

    Current The latest, up-to-date edition.

    MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001)

    Available format(s): 

    Language(s): 

    Published date:  29-08-2001

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms, definitions and symbols
      3.1 Terms and definitions
      3.2 Symbols
    4 Characterization of hand-transmitted vibration
      4.1 General consideration
      4.2 Measuring equipment for hand-transmitted vibration
      4.3 Coupling of the hand to the vibration source
      4.4 Quantity to be measured
      4.5 Multi-axis vibration
    5 Characterization of hand-transmitted vibration exposure
      5.1 General
      5.2 Daily exposure duration
      5.3 Daily vibration exposure
    6 Information to be reported
    Annex A (normative) Frequency-weighting and band-limiting
             filters
    Annex B (informative) Guidance on health effects of
             hand-transmitted vibration
    Annex C (informative) Relationship between vibration
             exposure and effects on health
    Annex D (informative) Factors likely to influence the
             effects of human exposure to hand-transmitted
             vibration in working conditions
    Annex E (informative) Preventive measures to be adopted by
             those responsible for occupational health and safety
    Annex F (informative) Guidelines for reporting additional
             information
    Annex ZA (normative) Normative references to international
             publications with their relevant European
             publications
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes requirement for measuring and reporting hand-transmitted vibration exposure in three orthogonal axes. Also defines frequency weighting and band-limiting filters for uniform comparison of measurements. Applicable to periodic and to random or non-periodic vibration and to repeated shock type excitation (impact).

    General Product Information - (Show below) - (Hide below)

    Committee TC 231
    Development Note Supersedes ENV 25349. (11/2001)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    S.R. CEN/TR 1030-2:2016 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE
    12/30236576 DC : 0 BS EN 12786 - SAFETY OF MACHINERY - RULES FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS
    BS PD CEN/TR 1030-2 : 2016 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE
    BS EN 15997 : 2011 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
    04/30117319 DC : 0 BS EN 60335-2-72 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE
    I.S. EN 16230-1:2013 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
    12/30271353 DC : 0 BS EN 60335-2-8:2003/AB - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES
    09/30187535 DC : 0 BS EN 13000 - CRANES - MOBILE CRANES
    CEI EN 60335-2-67 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE
    S.R. CEN/TR 16391:2012 MECHANICAL VIBRATION AND SHOCK - HAND-TRANSMITTED VIBRATION - INFLUENCE OF COUPLING FORCES AT THE HAND-MACHINE INTERFACE ON EXPOSURE EVALUATION
    BS EN 16230-1 : 2013 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
    I.S. EN 13000:2010 CRANES - MOBILE CRANES
    I.S. EN 62841-1:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    DIN EN 1005-5:2007-05 Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency
    BS EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing General requirements
    BS EN 1032 : 2003 MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
    BS EN 13000 : 2010 CRANES - MOBILE CRANES
    BS EN 614-1 : 2006 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
    CEN/TR 1030-2 : 2016 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE
    EN 15997:2011/AC:2012 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
    CEN/TR 16391 : 2012 MECHANICAL VIBRATION AND SHOCK - HAND-TRANSMITTED VIBRATION - INFLUENCE OF COUPLING FORCES AT THE HAND-MACHINE INTERFACE ON EXPOSURE EVALUATION
    EN 12182:2012 Assistive products for persons with disability - General requirements and test methods
    EN 60519-1:2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS (IEC 60519-1:2015)
    EN 1005-5:2007 Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency
    EN 1032:2003+A1:2008 (edition 3) Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
    EN ISO 20643:2008/A1:2012 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012)
    S.R. CEN/TR 15350:2013 MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY
    CEI EN 60335-2-69 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
    DIN EN 15997:2012-10 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
    I.S. TS 15694:2004 MECHANICAL VIBRATION AND SHOCK - MEASUREMENT AND EVALUATION OF SINGLE SHOCKS TRANSMITTED FROM HAND-HELD AND HAND-GUIDED MACHINES TO THE HAND-ARM SYSTEM
    BS EN 60335-2-8 : 2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES
    DIN EN 13000:2014-11 CRANES - MOBILE CRANES
    DIN EN 12182:2012-07 Assistive products for persons with disability - General requirements and test methods
    ISO/TS 15694:2004 Mechanical vibration and shock Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system
    I.S. EN ISO 20643:2008 MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005)
    UNI CEN/TR 15350 : 2013 MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY
    I.S. EN 13861:2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
    I.S. EN 614-1:2006 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
    I.S. EN 12182:2012 ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
    I.S. EN 12786:2013 SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARD
    I.S. EN 1032:2003 MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
    I.S. EN 15997:2011 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN 60335-2-8:2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES
    PREN 12786 : DRAFT 2012 SAFETY OF MACHINERY - RULES FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS
    I.S. CEN TR 15350:2006 MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY
    I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    PREN 60335-2-72 : DRAFT 2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE
    DIN EN 12786:2013-05 SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS
    DIN EN ISO 20643 E : 2012 MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005 + AMD 1:2012)
    DIN EN 1032:2009-02 MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
    DIN EN 13861:2012-01 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
    CEN/TR 15350:2013 MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY
    UNI EN 614-1 : 2009 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
    UNI CEN/TR 16391 : 2012 MECHANICAL VIBRATION AND SHOCK - HAND-TRANSMITTED VIBRATION - INFLUENCE OF COUPLING FORCES AT THE HAND-MACHINE INTERFACE ON EXPOSURE EVALUATION
    UNI EN 13861 : 2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
    UNI EN 12786 : 2013 SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS
    UNI EN ISO 20643 : 2012 MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION
    UNI EN 13000 : 2014 CRANES - MOBILE CRANES
    UNI EN 12182 : 2012 ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
    UNI EN 1032 : 2009 MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
    08/30193440 DC : 0 BS EN 60335-2-72 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE
    08/30182786 DC : DRAFT JULY 2008 BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
    02/706469 DC : DRAFT MAY 2002 PREN ISO 20643 - HAND-TRANSMITTED VIBRATION FROM HAND-HELD OR HAND-GUIDED MACHINERY - MEASUREMENT OF VIBRATION AT THE GRIP SURFACE
    BS PD CEN/TR 16391 : 2012 MECHANICAL VIBRATION AND SHOCK - HAND-TRANSMITTED VIBRATION - INFLUENCE OF COUPLING FORCES AT THE HAND-MACHINE INTERFACE ON EXPOSURE EVALUATION
    PD CEN/TR 15350:2013 MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY
    07/30171078 DC : DRAFT AUG 2007 BS EN 61029-1 - SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
    I.S. EN IEC 61010-2-120:2018 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-120: PARTICULAR SAFETY REQUIREMENTS FOR MACHINERY ASPECTS OF EQUIPMENT
    16/30337122 DC : 0 BS EN 16990 - NON-TYPE APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - ALL TERRAIN VEHICLES (ATVS - QUADS) AND SIDE BY SIDE VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS
    CEI EN 60335-2-72 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE FOR COMMERCIAL USE
    UNE-EN 12786:2013 Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards
    BS EN 1005-5:2007 Safety of machinery. Human physical performance Risk assessment for repetitive handling at high frequency
    BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    BS EN 12786 : 2013 SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS
    DIN EN ISO 20643:2012-10 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005 + Amd. 1:2012) (includes Amendment :2012)
    BS EN ISO 20643 : 2008 MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005)
    BS EN 12182:2012 (published 2012-06) Assistive products for persons with disability. General requirements and test methods
    BS EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements
    EN 13861:2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
    EN ISO/TS 15694 : 2004 MECHANICAL VIBRATION AND SHOCK - MEASUREMENT AND EVALUATION OF SINGLE SHOCKS TRANSMITTED FROM HAND-HELD AND HAND-GUIDED MACHINES TO THE HAND-ARM SYSTEM
    EN 614-1:2006+A1:2009 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
    EN 16230-1:2013+A1:2014 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
    03/311729 DC : DRAFT JULY 2003 EN ISO 8041 - HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
    09/30206741 DC : 0 BS EN 15997 - ALL TERRAIN VEHICLES - REQUIREMENTS AND TEST METHODS
    UNE-CEN/TR 15350:2013 IN Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery
    DIN EN 16230-1:2015-04 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
    EN IEC 61010-2-120 : 2018 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-120: PARTICULAR SAFETY REQUIREMENTS FOR MACHINERY ASPECTS OF EQUIPMENT (IEC 61010-2-120:2016)
    08/30195341 DC : 0 BS EN 60335-2-67 FPRAB - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT AND FLOOR CLEANING MACHINES, FOR INDUSTRIAL AND COMMERCIAL USE
    UNE-EN 60335-2-8:2016 Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
    CEI EN 60335-2-68 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES FOR COMMERCIAL USE
    EN 13000:2010+A1:2014 CRANES - MOBILE CRANES
    DIN EN 614-1:2009-06 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
    ISO 20643:2005 Mechanical vibration Hand-held and hand-guided machinery Principles for evaluation of vibration emission
    BS EN 13861:2011 Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
    EN 12786:2013 SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS
    EN 62841-1:2015/AC:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 5349-2:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace
    CR 12349:1996 MECHANICAL VIBRATION - GUIDE TO THE HEALTH EFFECTS OF VIBRATION ON THE HUMAN BODY
    ISO 10819:2013 Mechanical vibration and shock Hand-arm vibration Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
    CR 1030-2 : 1995 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE
    CR 1030-1 : 1995 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY
    ISO 2041:2009 Mechanical vibration, shock and condition monitoring Vocabulary
    ENV 28041 : DRAFT 1993 HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
    ISO 8041:2005 Human response to vibration Measuring instrumentation
    ISO 5348:1998 Mechanical vibration and shock Mechanical mounting of accelerometers
    IEC 61260:1995 Electroacoustics - Octave-band and fractional-octave-band filters
    ISO 5805:1997 Mechanical vibration and shock Human exposure Vocabulary
    ISO 8727:1997 Mechanical vibration and shock Human exposure Biodynamic coordinate systems
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective