EN ISO 7027:1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Water quality - Determination of turbidity (ISO 7027:1999)
01-06-2016
15-12-1999
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sampling and samples
5 Semiquantitative methods of turbidity measurement
5.1 Measurement using the transparency testing
tube
5.2 Measurement using the transparency testing
disk
6 Quantitative methods of turbidity measurement
using optical turbidimeters
6.1 General principles
6.2 Reagents
6.3 Measurement of diffuse radiation
6.4 Measurement of attenuated radiation
Annex A (informative) Results of an interlaboratory
collaborative trial to evaluate the suitability
of a synthetic polymer for use as a secondary
standard to formazine in turbidity measurements
Annex ZA (normative) Normative references to international
publications with their relevant European publications
Bibliography
Defines four procedures for determining water turbidity.
Committee |
CEN/TC 230
|
DevelopmentNote |
Supersedes EN 27027 (02/2000)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NF EN ISO 7027 : 2000 | Identical |
BS EN ISO 7027:2000 | Identical |
PN EN ISO 7027 : 2003 | Identical |
DIN EN ISO 7027:2000-04 | Identical |
UNI EN ISO 7027 : 2003 | Identical |
SN EN ISO 7027 : 2000 | Identical |
NEN EN ISO 7027 : 2000 | Identical |
UNE-EN ISO 7027:2001 | Identical |
NBN EN ISO 7027 : 2000 | Identical |
I.S. EN ISO 7027:2000 | Identical |
ISO 7027:1999 | Identical |
NS EN ISO 7027 : 2ED 1999 | Identical |
UNE-EN 16698:2016 | Water quality - Guidance on quantitative and qualitative sampling of phytoplankton from inland waters |
13/30291787 DC : 0 | BS EN 16698 - WATER QUALITY - GUIDANCE ON QUANTITATIVE AND QUALITATIVE SAMPLING OF PHYTOPLANKTON FROM INLAND WATERS |
15/30317321 DC : 0 | BS EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
EN 13052-1:2001 | Influence of materials on water intended for human consumption - Organic materials - Determination of colour and turbidity of water in piping systems - Part 1: Test method |
I.S. EN 14944-1:2006 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
BS EN 16698:2015 | Water quality. Guidance on quantitative and qualitative sampling of phytoplankton from inland waters |
BS EN 14395-1:2004 | Influence of organic materials on water intended for human consumption. Organoleptic assessment of water in storage systems Test method |
I.S. EN 14652:2006 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
DIN EN 14395-1:2005-01 | Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method |
I.S. EN 14898:2006 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ACTIVE MEDIA FILTERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
VDI 2083 Blatt 13.2:2009-01 | Cleanroom technology - Quality, production and distribution of ultrapure water - Microelectronics and other technical applications |
VDI 2083 Blatt 13.1:2009-01 | Cleanroom technology - Quality, production and distribution of ultrapure water - Fundamentals |
DIN EN 16698:2015-12 | WATER QUALITY - GUIDANCE ON QUANTITATIVE AND QUALITATIVE SAMPLING OF PHYTOPLANKTON FROM INLAND WATERS |
15/30329101 DC : 0 | BS EN 16907-6 - EARTHWORKS - PART 6: LAND RECLAMATION WITH DREDGED HYDRAULIC FILL |
03/110849 DC : DRAFT JULY 2003 | BS EN 14652 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICE - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
04/30083253 DC : DRAFT MAY 2004 | EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
PREN 16907-6 : DRAFT 2015 | EARTHWORKS - PART 6: LAND RECLAMATION WITH DREDGED HYDRAULIC FILL |
I.S. EN 16698:2015 | WATER QUALITY - GUIDANCE ON QUANTITATIVE AND QUALITATIVE SAMPLING OF PHYTOPLANKTON FROM INLAND WATERS |
BS EN 14652 : 2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
BS EN 14898 : 2006 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ACTIVE MEDIA FILTERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
DIN EN 14944-1:2006-07 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
EN 14898:2006+A1:2007 | Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing |
EN 14652:2005+A1:2007 | Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing |
EN 16698:2015 | Water quality - Guidance on quantitative and qualitative sampling of phytoplankton from inland waters |
EN 14395-1:2004 | Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method |
EN 14944-1:2006 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
PREN 14944-1 : DRAFT 2015 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
02/561264 DC : DRAFT MAR 2002 | BS EN 14395-1 - INFLUENCE OF ORGANIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - ORGANOLEPTIC ASSESSMENT OF WATER IN STORAGE SYSTEMS - PART 1: TEST METHOD |
DIN EN 14944-1:2015-06 (Draft) | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
BS EN 14944-1:2006 | Influence of cementitious products on water intended for human consumption. Test methods Influence of factory made cementitious products on organoleptic parameters |
BS EN 13052-1:2001 | Influence of materials on water intended for human consumption. Organic materials. Determination of colour and turbidity of water in piping systems Test method |
DIN EN 14898:2007-09 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ACTIVE MEDIA FILTERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
DIN EN 14652:2007-09 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
ISO 3864:1984 | Safety colours and safety signs |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.