Skip to content
Please enter a keyword to search

  • EN ISO 9002:1994/AC:1997

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION

    Available format(s): 

    Superseded date:  01-12-2000

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Committees responsible
    National foreword
    Foreword
    Introduction
    Specification
    1 Scope
    2 Normative reference
    3 Definitions
    4 Quality system requirements
    4.1 Management responsibility
    4.2 Quality system
    4.3 Contract review
    4.4 Design control
    4.5 Document and data control
    4.6 Purchasing
    4.7 Control of customer-supplied product
    4.8 Product identification and traceability
    4.9 Process control
    4.10 Inspection and testing
    4.11 Control of inspection, measuring and test
          equipment
    4.12 Inspection and test status
    4.13 Control of nonconforming product
    4.14 Corrective and preventive action
    4.15 Handling, storage, packaging, preservation and
          delivery
    4.16 Control of quality records
    4.17 Internal quality audits
    4.18 Training
    4.19 Servicing
    4.20 Statistical techniques
    Annex
    A (informative) Bibliography

    Abstract - (Show below) - (Hide below)

    Gives the quality requirements in cases where a contract requires a supplier to demonstrate a required level of process control for the supply of a service or product. Applies in contracts when: confidence in product conformance can be reached by satisfactory demonstration of a certain supplier's capabilities in installation and production; the specified requirements for product are as a specification or as an established design. Also covers Quality System Requirements such as Management Responsibility; Quality System; Document Control; Contract Review; Purchasing; Purchaser Supplied Product; Product Identification and Traceability; Process Control; Inspection and Testing; Inspection, Measuring and Test Equipment; Inspection and Test Status; Corrective Action and Training.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/CS
    Development Note Formerly EN 29002
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    99/709740 DC : DRAFT JUN 99 PREN 10253-2 - BUTT WELDING PIPE FITTINGS - PART 2: WROUGHT CARBON AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    BS EN 45510-3-2:2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3 - BOILERS - SECTION 3-2 - SHELL BOILERS
    I.S. EN 45510-2-5:2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    BS EN 45510-2-3:2000 GUIDE FOR THE PROCUREMENT OF POWER STATION EQUIPMENT - ELECTRICAL EQUIPMENT - STATIONARY BATTERIES AND CHARGERS
    BS PD CR 14245 : 2001 GUIDELINES FOR THE APPLICATION OF EN 197-2: 'CONFORMITY EVALUATION'
    97/711221 DC : DRAFT JUL 1997 DRAFT STANDARD PREN 12952-1: WATER TUBE BOILERS - PART 1: GENERAL
    99/100965 DC : DRAFT FEB 1999 PREN 13493 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN SOLID WASTE STORAGES AND WASTE DISPOSAL SITES
    BS EN 50207:2001 RAILWAY APPLICATIONS - ELECTRONIC POWER CONVERTERS FOR ROLLING STOCK
    BS EN 45510-6-5:2000 GUIDE FOR THE PROCUREMENT OF POWER STATION EQUIPMENT - TURBINE AUXILIARIES - PART 6-5: DRY COOLING SYSTEMS
    BS EN 60746-1:2003 EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL
    I.S. EN 1457:1999 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
    I.S. EN 61207-3:2002 GAS ANALYZERS - EXPRESSION OF PERFORMANCE - PARAMAGNETIC OXYGEN ANALYZERS
    13/30277457 DC : 0 BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
    CEI UNI EN 45510-4-1 : 1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 1: EQUIPMENT FOR REDUCTION OF DUST EMISSIONS
    BS EN 60966-1:1999 (published 1999-10) Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods
    00/103277 DC : DRAFT APR 2000 BS EN 13888 - GROUTS FOR TILES - DEFINITIONS AND SPECIFICATIONS
    02/104526 DC : DRAFT JULY 2002 EN 13263-2 - SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
    BS EN 45510-6-6:2000 GUIDE FOR THE PROCUREMENT OF POWER STATION EQUIPMENT - TURBINE AUXILIARIES - PART 6-6: WET AND WET/DRY COOLING TOWERS
    03/304152 DC : DRAFT MAR 2003 IEC 61850-10 ED.1.0 - COMMUNICATION NETWORKS AND SYSTEMS IN SUBSTATIONS - PART 10: CONFORMANCE TESTING
    07/30162629 DC : 0 BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS
    01/105397 DC : DRAFT JULY 2001 PREN 1748-1-2 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - PART 1-2: BOROSILICATE GLASS - EVALUATION OF CONFORMITY
    BS EN 61192-1:2003 WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - PART 1: GENERAL
    DIN EN 15644 E : 2009 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
    DD ENV 1453-2:2001 PLASTIC PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPRATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    DD ENV 197-2:1996 CEMENT - CONFORMITY EVALUATION
    09/30192323 DC : 0 BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
    I.S. EN 45510-4-9:1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-9: BOILER AUXILIARIES - SOOTBLOWERS
    BS EN 45510-3-3:2000 GUIDE FOR THE PROCUREMENT OF POWER STATION EQUIPMENT - BOILERS - PART 3-3: BOILERS WITH FLUIDIZED BED FIRING
    03/318982 DC : DRAFT NOV 2003 EN 14811-1 - RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - PART 1: GROOVED AND ASSOCIATED CONSTRUCTION
    I.S. EN 1254-1:1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES
    CEI UNI EN 45510-3-2 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-2: BOILERS - SHELL BOILERS
    BS EN 61190-1-1:2002 Attachment materials for electronic assembly Requirements for soldering fluxes for high-quality interconnections in electronics assembly
    I.S. EN 1254-3:1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES
    DIN EN 45510-2-7:2003-12 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    PREN 10208-3 : DRAFT 1997 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
    CEI EN 50155 : 2008 RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
    I.S. EN 74-2:2008 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
    CEI UNI EN 45510-5-4 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-4: HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES
    CEI EN 60746-1 : 2003 EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL
    I.S. EN 61479:2001 LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
    I.S. EN 61192-1:2003 WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - GENERAL
    I.S. CLC/TS 61112:2006 BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
    CEI UNI EN 45510-6-4 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-4: TURBINE AUXILIARIES - PUMPS
    PREN 15650 : DRAFT 2017 VENTILATION FOR BUILDINGS - FIRE DAMPERS
    UNI EN 74-2 : 2009 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
    UNE-EN 74-2:2010 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
    I.S. CLC TS 50502:2007 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS
    EN ISO 14922-2:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999)
    DIN EN 12195-2:2001-02 LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES
    EN ISO 14922-4:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999)
    DIN EN 1254-1:1998-03 Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
    BS EN 12079:1999 OFFSHORE CONTAINERS - DESIGN, CONSTRUCTION, TESTING, INSPECTION AND MARKING
    BS EN 1826:1997 BIOTECHNOLOGY - LARGE-SCALE PROCESS AND PRODUCTION - CONTROL PROCEDURES FOR RAW MATERIALS
    BS EN 10095 : 1999-07 HEAT RESISTING STEELS AND NICKEL ALLOYS
    BS EN 12259-3:2000 Fixed firefighting systems. Components for sprinkler and water spray systems Dry alarm valve assemblies
    BS EN 12094-7:2001 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 7: REQUIREMENTS AND TEST METHODS FOR NOZZLES FOR CO[2] SYSTEMS
    ISO 14922-1:1999 Thermal spraying Quality requirements of thermally sprayed structures Part 1: Guidance for selection and use
    BS EN 556-1:2001 Sterilization of medical devices. Requirements for medical devices to be designated \'STERILE\' Part 1. Requirements for terminally sterilized medical devices
    BS EN 1169:1999 Precast concrete products. General rules for factory production control of glass-fibre reinforced cement
    BS EN 600:1996 NATURAL RUBBER LATEX MALE CONDOMS
    ISO/IEC Guide 62:1996 General requirements for bodies operating assessment and certification/registration of quality systems
    BS EN 1254-2:1998 Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes
    BS EN 877 : 1999 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    BS EN 1619:1997 BIOTECHNOLOGY - LARGE-SCALE PROCESS AND PRODUCTION - GENERAL REQUIREMENTS FOR MANAGEMENT AND ORGANIZATION FOR STRAIN CONSERVATION PROCEDURES
    BS EN 12306:1998 BIOTECHNOLOGY - GUIDANCE FOR QUALITY CONTROL OF DIAGNOSTIC KITS USED IN AGRICULTURE, PLANT AND ANIMAL PEST AND DISEASE CONTROL AND ENVIRONMENTAL CONTAMINATION
    BS EN 12075:1997 (published 1997-08) Biotechnology. Large scale process and production. Procedures for fermentation and downstream processes
    BS EN 45510-4-1:1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - EQUIPMENT FOR REDUCTION OF DUST EMISSIONS
    BS EN 12195-2:2001 Load restraint assemblies on road vehicles. Safety Web lashing made from man-made fibres
    BS EN 866-1:1997 BIOLOGICAL SYSTEMS FOR TESTING STERILIZERS AND STERILIZATION PROCESSES - PART 1: GENERAL REQUIREMENTS
    BS EN 45510-5-1:1998 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - STEAM TURBINES
    BS EN 13091:2000 (published 2000-03) Biotechnology. Performance criteria for filter elements and filtration assemblies
    BS EN 681-1:1996 (published 2006-03) Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber
    ISO 14922-4:1999 Thermal spraying Quality requirements of thermally sprayed structures Part 4: Elementary quality requirements
    BS EN 12259-2:1999 Fixed firefighting systems. Components for sprinkler and water spray systems Wet alarm valve assemblies
    BS EN 12094-13:2001 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for check valves and non-return valves
    BS EN 1592-1:1998 ALUMINIUM AND ALUMINIUM ALLOYS - HF SEAM WELDED TUBES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
    BS EN 12259-4:2000 Fixed firefighting systems. Components for sprinkler and water spray systems Water motor alarms
    DIN EN 729-1:1994-11 QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 1: GUIDELINES FOR SELECTION AND USE
    DIN EN 729-2:1994-11 QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS
    EN 45510-5-2 : 1998 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES
    I.S. EN ISO 14922-3:1999 THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 3: STANDARD QUALITY REQUIREMENTS
    EN 45510-5-3 : 1998 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - WIND TURBINES
    EN 45510-5-4:1998 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-4: HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES
    EN 61479:2001/A1:2002 LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
    EN 10242:1994/A2:2003 THREADED PIPE FITTING IN MALLEABLE CAST IRON
    EN 13311-1:2001 Biotechnology - Performance criteria for vessels - Part 1: General performance criteria
    EN 12079 : 1999 OFFSHORE CONTAINERS - DESIGN, CONSTRUCTION, TESTING, INSPECTION AND MARKING
    EN 12442-3 : 2000 ANIMAL TISSUES AND THEIR DERIVATIVES UTILIZED IN THE MANUFACTURE OF MEDICAL DEVICES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE AGENTS
    EN 12074:2000 Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
    EN 12306:1997 Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination
    EN 12195-2:2000 Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres
    I.S. EN ISO 14922-2:1999 THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS
    EN 45510-4-7 : 1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - ASH HANDLING PLANT
    EN 12462:1998 Biotechnology - Performance criteria for pumps
    EN 12094-7:2000/A1:2005 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 7: REQUIREMENTS AND TEST METHODS FOR NOZZLES FOR CO[2] SYSTEMS
    EN 45510-4-6 : 1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - FLUE GAS DESULPHURIZATION (DESOX) PLANT
    EN 1293:1999 General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers
    EN 12781:2001 Wallcoverings - Specification for cork panels
    EN 1092-2:1997 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
    EN 13312-1:2001 Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria
    EN 45510-1 : 1997 Guide for procurement of power station equipment - Part 1: Common clauses
    EN 12259-4:2000/A1:2001 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms
    EN 12259-3:2000/A2:2005 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 3: DRY ALARM VALVE ASSEMBLIES
    EN 45510-6-2 : 1998 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-2: TURBINE AUXILIARIES - FEEDWATER HEATERS
    CR ISO 17663 : 2001 WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES
    EN 12890 : 2000 FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES
    EN 45510-6-4 : 1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-4: TURBINE AUXILIARIES - PUMPS
    EN 61284:1997 Overhead lines - Requirements and tests for fittings
    EN 60746-1:2003 Expression of performance of electrochemical analyzers - Part 1: General
    EN 877:1999/A1:2006/AC:2008 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    EN 12109:1999 Vacuum drainage systems inside buildings
    EN 12690:1999 Biotechnology - Performance criteria for shaft seals
    EN 12763:2000 Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery
    ENV 197-2 : 1995 CEMENT - CONFORMITY EVALUATION
    EN 45510-4-10 : 1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - FLUE GAS DENITRIFICATION (DE-NOX) PLANT
    EN 12094-13:2001/AC:2002 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 13: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES AND NON-RETURN VALVES
    EN 12442-2 : 2000 ANIMAL TISSUES AND THEIR DERIVATIVES UTILIZED IN THE MANUFACTURE OF MEDICAL DEVICES - PART 2: CONTROLS ON SOURCING, COLLECTION AND HANDLING
    EN 12101-7:2011 Smoke and heat control systems - Part 7: Smoke duct sections
    EN 45510-4-1 : 1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - EQUIPMENT FOR REDUCTION OF DUST EMISSIONS
    EN 12075:1997 Biotechnology - Large-scale process and production - Procedures for fermentation and downstream processes
    I.S. EN ISO 14922-1:1999 THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 1: GUIDANCE FOR SELECTION AND USE
    BS EN 1457:1999 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
    DEFSTAN 61-3/5(1992) : INTERIM GENERIC SPECIFICATION FOR BATTERIES, NON RECHARGEABLE, PRIMARY
    ENV 1452-7:2000 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity
    EN 50207:2000 Railway applications - Electronic power converters for rolling stock
    I.S. EN 1492-1:2000 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
    CEI UNI EN 45510-6-7 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-7: TURBINE AUXILIARIES - MOISTURE SEPARATOR REHEATERS
    01/108876 DC : DRAFT DEC 2001 PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS, DURABILITY AND EVALUATION OF CONFORMITY
    98/109040 DC : DRAFT NOV 1998 PREN 13362 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN THE CONSTRUCTION OF CANALS
    I.S. EN 45510-2-9:2008 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS
    I.S. EN 12442-3:2000 ANIMAL TISSUES AND THEIR DERIVATIVES UTILIZED IN THE MANUFACTURE OF MEDICAL DEVICES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE AGENTS
    DIN EN 15650 E : 2010 VENTILATION FOR BUILDINGS - FIRE DAMPERS
    06/30150265 DC : 0 EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
    CEI UNI EN 45510-1 : 1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT PART 1: COMMON CLAUSES
    98/542445 DC : DRAFT JULY 1998 PREN 45545-1 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
    BS EN 12101-7:2011 Smoke and heat control systems Smoke duct sections
    01/105399 DC : DRAFT JULY 2001 PREN 14178-2 - GLASS IN BUILDING - BASIC ALKALINE EARTH SILICATE GLASS PRODUCTS - PART 2: EVALUATION OF CONFORMITY
    UNI EN 15644 : 2009 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
    97/101296 DC : DRAFT FEB 1997 PREN 12737 - PRECAST CONCRETE FLOOR SLATS FOR LIVESTOCK
    BS EN 45510-2-7:2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    08/30159342 DC : DRAFT JUNE 2008 BS EN 12668-2 - NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 2: PROBES
    08/30159339 DC : DRAFT JUNE 2008 BS EN 12668-1 - NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC TESTING EQUIPMENT - PART 1: INSTRUMENTS
    BS CECC00114-1(1991) : 1991 RULES OF PROCEDURE 14. QUALITY ASSESSMENT PROCEDURES - APPROVAL OF MANUFACTURERS AND OTHER ORGANIZATIONS
    I.S. EN 61481:2001 LIVE WORKING - PORTABLE PHASE COMPARATORS FOR VOLTAGES OF 1 KV TO 36 KV A.C.
    01/105394 DC : DRAFT JULY 2001 PREN 13024-2 - THERMALLY TOUGHENED BOROSILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY
    BS EN 45510-6-4:2000 GUIDE FOR THE PROCUREMENT OF POWER STATION EQUIPMENT - TURBINE AUXILIARIES - PART 6-4: PUMPS
    DEFSTAN 59-103(PT2)/1(1993) : INTERIM EMI/EMP GASKET COMPONENTS - PART 2: GASKET CAPABILITY APPROVAL PROCEDURES
    98/123516 DC : DRAFT JULY 1998 PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS
    02/105004 DC : DRAFT JULY 2002 PREN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING SANDWICH PANELS - FACTORY MADE PRODUCTS - SPECIFICATION
    07/30166915 DC : DRAFT AUG 2007 BS EN 15714-4 - INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
    BS EN 15650:2010 Ventilation for buildings. Fire dampers
    UNI CEI EN 45510-2-5 : 2011 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    BS EN 45510-6-9:2000 GUIDE FOR THE PROCUREMENT OF POWER STATION EQUIPMENT - TURBINE AUXILIARIES - COOLING WATER SYSTEMS
    99/100963 DC : DRAFT FEB 1999 PREN 13491 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN TUNNELS AND UNDERGROUND STRUCTURES
    BS EN 61479:2001 Live working. Flexible conductor covers (line hoses) of insulating material
    BS EN 15644:2008 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
    CEI UNI EN 45510-5-3 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-3: WIND TURBINES
    CEI UNI EN 45510-6-9 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-9: TURBINE AUXILIARIES - COOLING WATER SYSTEMS
    CEI UNI EN 45510-2-7 : 2006 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    99/100964 DC : DRAFT FEB 1999 PREN 13492 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES OR TRANSFER STATIONS
    BS EN 45510-2-5:2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    I.S. EN 1254-4:1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
    CEI UNI EN 45510-3-1 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-1 - BOILERS - WATER TUBE BOILERS
    01/108539 DC : DRAFT NOV 2001 PREN 572-9 - GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS - PART 9: EVALUATION OF CONFORMITY
    CEI UNI EN 45510-2-4 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-4: ELECTRICAL EQUIPMENT - HIGH POWER STATIC CONVERTORS
    CEI EN 61284 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
    CEI UNI EN 45510-2-6 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-6: ELECTRICAL EQUIPMENT - GENERATORS
    CEI UNI EN 45510-8-1 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 8-1: CONTROL AND INSTRUMENTATION
    I.S. EN 61189-3:2008 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS)
    I.S. EN 556-1:2002 STERILISATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED STERILE - PART 1: REQUIREMENTS FOR TERMINALLY STERILISED MEDICAL DEVICES
    DIN EN 1677-4:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
    DIN EN 12279:2005-12 GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS
    DIN EN 12890 : 2002-05 FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES
    DIN EN 1677-1:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
    DIN EN 1677-5:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
    DIN EN 1492-2:2009-05 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
    BS EN 10242:1995 Threaded pipe fittings in malleable cast iron
    BS EN 1758:1998 COPPER AND COPPER ALLOYS - STRIP FOR LEAD FRAMES
    BS EN 1174-1:1996 STERILIZATION OF MEDICAL DEVICES - ESTIMATION OF THE POPULATION OF MICRO-ORGANISMS ON PRODUCT - REQUIREMENTS
    BS EN 12884:1999 BIOTECHNOLOGY - PERFORMANCE CRITERIA FOR CENTRIFUGES
    BS EN 12885:1999 Biotechnology. Performance criteria for cell disrupters
    BS EN 1254-3:1998 Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with plastics pipes
    BS EN 13380:2001 General requirements for components used for renovation and repair of drain and sewer systems outside buildings
    BS EN 1492-2 : 2000 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES, FOR GENERAL PURPOSE USE
    BS EN 588-1:1997 FIBRE-CEMENT PIPES FOR SEWERS AND DRAINS - PART 1: PIPES, JOINTS AND FITTINGS FOR GRAVITY SYSTEMS
    BS EN 1254-4:1998 COPPER AND COPPER ALLOYS - PLUMBING AND FITTINGS - FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
    I.S. EN ISO 14922-4:1999 THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 4: ELEMENTARY QUALITY REQUIREMENTS
    I.S. EN 1677-5:2001 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
    I.S. EN 1492-2:2000 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
    DIN EN 729-4:1994-11 QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 4: ELEMENTARY QUALITY REQUIREMENTS
    I.S. EN 1677-6:2001 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
    I.S. EN 1677-4:2001 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
    DIN EN 729-3:1994-11 QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 3: STANDARD QUALITY REQUIREMENTS
    DIN EN 12890:2000-06 FOUNDING - PATTERNS, PATTERN EQUIPMENT AND CORE BOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES
    I.S. EN 12781:2001 WALLCOVERINGS - SPECIFICATION FOR CORK PANELS
    I.S. EN 1677-1:2000 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
    DIN EN 50126 : 2000 COR 2 2011 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF DEPENDABILITY, RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS)
    I.S. EN 1092-2:1997 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 2: CAST IRON FLANGES
    UNI EN 1677-6 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
    VDE 0682-412 : 2001 AMD 1 2003 LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.