ES 201 488 : 1.1.1
Current
The latest, up-to-date edition.
DATA-OVER-CABLE SERVICE INTERFACE SPECIFICATIONS RADIO FREQUENCY INTERFACE SPECIFICATION
Hardcopy , PDF
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Intellectual Property Rights
Foreword
1 Scope
1.1 General Scope
1.2 Requirements
1.3 Background
2 References
3 Definitions and abbreviations
3.1 Definitions
3.2 Abbreviations
4 Functional Assumptions
4.1 Broadband Access Network
4.2 Equipment Assumptions
4.3 RF Channel Assumptions
4.4 Transmission Levels
4.5 Frequency Inversion
5 Communication Protocols
5.1 Protocol Stack
5.2 The MAC Forwarder
5.3 Network Layer
5.4 Above the Network Layer
5.5 Data Link Layer
5.6 Physical Layer
6 Physical Media Dependent Sublayer Specification
6.1 Scope
6.2 Upstream
6.3 Downstream
7 Downstream Transmission Convergence Sublayer
7.1 Introduction
7.2 MPEG Packet Format
7.3 MPEG Header for DOCSIS Data-Over-Cable
7.4 MPEG Payload for DOCSIS Data-Over-Cable
7.5 Interaction with the MAC Sublayer
7.6 Interaction with the Physical Layer
7.7 MPEG Header Synchronization and Recovery
8 Media Access Control Specification
8.1 Introduction
8.2 MAC Frame Formats
8.3 MAC Management Messages
9 Media Access Control Protocol Operation
9.1 Upstream Bandwidth Allocation
9.2 Support for Multiple Channels
9.3 Timing and Synchronization
9.4 Upstream Transmission and Contention Resolution
9.5 Data Link Encryption Support
10 Quality of Service & Fragmentation
10.1 Theory of Operation
10.2 Upstream Service Flow Scheduling Services
10.3 Fragmentation
10.4 Payload Header
11 Cable Modem - CMTS Interaction
11.1 CMTS Initialization
11.2 Cable Modem Initialization
11.3 Standard Operation
11.4 Dynamic Service
11.5 Fault Detection and Recovery
12 Supporting Future New Cable Modem Capabilities
12.1 Downloading Cable Modem Operating Software
Annex A (normative): Well-Known Addresses
A.1 MAC Address
A.2 MAC Service IDs
A.3 MPEG PID
Annex B (normative): Parameters and Constants
Annex C (normative): Common Radio Frequency Interface Encodings
C.1 Encodings for Configuration and MAC-Layer Messaging
C.2 Quality-of-Service-Related Encodings
C.3 Encodings for Other Interfaces
C.4 Confirmation Code
Annex D (normative): CM Configuration Interface Specification
D.1 CM IP Addressing
D.2 CM Configuration
D.3 Configuration Verification
Annex E (informative): MAC Service Definition
E.1 MAC Service Overview
E.2 MAC Data Service Interface
E.3 MAC Control Service Interface
E.4 MAC Service Usage Scenarios
Annex F (informative): Example Preamble Sequence
F.1 Introduction
F.2 Example Preamble Sequence
Annex G (normative): DOCSIS v1.0/v1.1 Interoperability
G.1 Introduction
G.2 General Interoperability Issues
G.3 Hybrid Device
G.4 Interoperability & Performance
Annex H (informative): Multiple Upstream Channels
H.1 Single Downstream and Single Upstream per Cable Segment
H.2 Multiple Downstreams and Multiple Upstreams per Cable
Segment
Annex I (normative): The Data-Over-Cable Spanning Tree Protocol
I.1 Background
I.2 Public Spanning Tree
I.3 Public Spanning Tree Protocol Details
I.4 Spanning Tree Parameters and Defaults
Annex J (normative): Error Codes and Messages
Annex K (informative): DOCSIS Transmission and Contention
Resolution
K.1 Introduction
Annex L (normative): IGMP Example
L.1 Transition Events
Annex M (normative): Unsolicited Grant Services
M.1 Unsolicited Grant Service (UGS)
M.2 Unsolicited Grant Service with Activity Detection
(UGS-AD)
Annex N (normative): European Specification Additions
N.1 Scope
N.2 References
N.3 Definitions and abbreviations
N.4 Functional Assumptions
N.5 Communication Protocols
N.6 Physical Media Dependent Sublayer Specification
N.7 Downstream transmission convergence sublayer
History
Describes the radio-frequency interface specifications for high-speed data-over-cable systems, which were developed by Cable Television Laboratories (CableLabs) for the benefit of the cable industry, including contributions by operators and vendors from North America, Europe and other regions.
| Committee |
BROADCAS
|
| DocumentType |
Standard
|
| Pages |
346
|
| PublisherName |
European Telecommunications Standards Institute
|
| Status |
Current
|
| CEI EN 55035 : 2018 | ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS |
| I.S. EN 55032:2016 | ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - EMISSION REQUIREMENTS |
| TS 101 909-20-1 : 1.1.2 | DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 20: LAWFUL INTERCEPTION; SUB-PART 1: CMS BASED VOICE TELEPHONY SERVICES |
| 09/30148338 DC : 0 | |
| TS 101 909-3 : 1.1.1 | ACCESS AND TERMINALS (AT); DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 3: AUDIO CODEC REQUIREMENTS FOR THE PROVISION OF BI-DIRECTIONAL AUDIO SERVICE OVER CABLE TELEVISION NETWORKS USING CABLE MODEMS |
| TS 101 909-13-2 : 1.1.2 | DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 13: TRUNKING GATEWAY CONTROL PROTOCOL; SUB-PART 2: MGCP OPTION |
| TS 101 909-10 : 1.1.1 | ACCESS AND TERMINALS (AT); DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 10: EVENT MESSAGE REQUIREMENTS FOR THE PROVISION OF REAL TIME SERVICES OVER CABLE TELEVISION NETWORKS USING CABLE MODEMS |
| ES 202 488-2 : 1.1.1 | ACCESS AND TERMINALS (AT); SECOND GENERATION TRANSMISSION SYSTEMS FOR INTERACTIVE CABLE TELEVISION SERVICES - IP CABLE MODEMS; PART 2: RADIO FREQUENCY INTERFACE SPECIFICATION |
| TS 101 909-22 : 1.1.1 | DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES - PART 22: MANAGEMENT EVENT MESSAGES |
| TS 102 639-1 : 1.1.1 | ACCESS AND TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); THIRD GENERATION TRANSMISSION SYSTEMS FOR INTERACTIVE CABLE TELEVISION SERVICES - IP CABLE MODEMS; PART 1: GENERAL |
| TS 102 639-2 : 1.1.1 | ACCESS AND TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); THIRD GENERATION TRANSMISSION SYSTEMS FOR INTERACTIVE CABLE TELEVISION SERVICES - IP CABLE MODEMS; PART 2: PHYSICAL LAYER |
| TS 101 909-9 : 1.3.2 | DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 9: NETWORK CALL SIGNALLING (NCS) MIB REQUIREMENTS |
| TS 101 909-26-1 : 1.1.1 | DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 26: PROTOCOL IMPLEMENTATION CONFORMANCE STATEMENT (PICS) PROFORMA SPECIFICATION; SUB-PART 1: EMBEDDED MULTIMEDIA TERMINAL ADAPTER |
| TS 101 909-6 : 1.1.1 | ACCESS AND TERMINALS (AT); DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 6: MEDIA TERMINAL ADAPTER (MTA) DEVICE PROVISIONING |
| TR 102 305 : 1.1.1 | ACCESS AND TERMINALS (AT); IPCABLECOM ACCESS NETWORK; END TO END PROVISIONING FOR THE IPAT ARCHITECTURE (BETWEEN THE EMTA TO THE V5.2 INTERFACE) |
| TS 101 909-5 : 1.1.1 | ACCESS AND TERMINALS (AT); DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 5: DYNAMIC QUALITY OF SERVICE FOR THE PROVISION OF REAL TIME SERVICES OVER CABLE TELEVISION NETWORKS USING CABLE MODEMS |
| ES 202 667 : 1.1.5 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); AUDIOVISUAL QOS FOR COMMUNICATION OVER IP NETWORKS |
| TS 101 909-7 : 1.2.1 | ACCESS AND TERMINALS (AT); DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 7: MANAGEMENT INFORMATION BASE (MIB) FRAMEWORK |
| TR 101 963 : 1.1.1 | ACCESS AND TERMINALS (AT); REPORT ON THE REQUIREMENTS OF EUROPEAN CABLE INDUSTRY FOR IMPLEMENTATION OF IPCABLECOM TECHNOLOGIES; IDENTIFICATION OF HIGH LEVEL REQUIREMENTS AND ESTABLISHMENT OF PRIORITIES |
| TS 101 909-17 : 1.1.1 | DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 17: INTER-DOMAIN QUALITY OF SERVICE |
| TS 103 161-5 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); INTEGRATED BROADBAND CABLE AND TELEVISION NETWORKS; IPCABLECOM 1.5; PART 5: DYNAMIC QUALITY OF SERVICE FOR THE PROVISION OF REAL TIME SERVICES OVER CABLE TELEVISION NETWORKS USING CABLE MODEMS |
| TR 102 129 : 1.1.1 | TELECOMMUNICATIONS AND INTERNET PROTOCOL HARMONIZATION OVER NETWORKS (TIPHON); REQUIREMENTS DEFINITION STUDY; INTERWORKING OF TIPHON AND IPCABLECOM; ARCHITECTURE, PROTOCOL, QOS AND SECURITY |
| TS 101 909-2 : 1.2.1 | ACCESS AND TERMINALS (AT); DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 2: ARCHITECTURAL FRAMEWORK FOR THE DELIVERY OF TIME CRITICAL SERVICES OVER CABLE TELEVISION NETWORKS USING CABLE MODEMS |
| TS 102 639-3 : 1.1.1 | ACCESS AND TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); THIRD GENERATION TRANSMISSION SYSTEMS FOR INTERACTIVE CABLE TELEVISION SERVICES - IP CABLE MODEMS; PART 3: DOWNSTREAM INTERFACE |
| TR 102 136 : 1.1.1 | ACCESS AND TERMINALS (AT); ANALYSIS AND SCOPING OF IPCABLECOM INTERFACES AND INTERACTIONS FOR TESTING |
| TS 101 909-13 : 1.1.1 | ACCESS AND TERMINALS (AT); DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 13: TRUNKING GATEWAY CONTROL PROTOCOL |
| CISPR 32:2015 RLV | Electromagnetic compatibility of multimedia equipment - Emission requirements |
| TS 103 161-11 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); INTEGRATED BROADBAND CABLE AND TELEVISION NETWORKS; IPCABLECOM 1.5; PART 11: MEDIA TERMINAL ADAPTER (MTA) DEVICE PROVISIONING |
| BS EN 55032:2015 | Electromagnetic compatibility of multimedia equipment. Emission Requirements |
| CISPR 35:2016 | Electromagnetic compatibility of multimedia equipment - Immunity requirements |
| 15/30324675 DC : 0 | BS CISPR 35 ED1.0 - ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS |
| ES 201 488-1 : 1.2.2 | ACCESS AND TERMINALS (AT); DATA OVER CABLE SYSTEMS; PART 1: GENERAL |
| TS 102 318 : 1.1.1 | ACCESS AND TERMINALS (AT); DIGITAL BROADBAND ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PROTOCOL IMPLEMENTATION CONFORMANCE STATEMENT (PICS); INTERNET PROTOCOL ACCESS TERMINAL - LINE CONTROL SIGNALLING |
| TS 101 909-8 : 1.2.1 | ACCESS AND TERMINALS (AT); DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 8: MEDIA TERMINAL ADAPTER (MTA) MANAGEMENT INFORMATION BASE (MIB) |
| TS 101 909-20-2 : 1.2.1 | DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 20: LAWFUL INTERCEPTION; SUB-PART 2: STREAMED MULTIMEDIA SERVICES |
| EN 55035:2017 | Electromagnetic compatibility of multimedia equipment - Immunity requirements |
| TS 101 909-23 : 1.1.1 | DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 23: INTERNET PROTOCOL ACCESS TERMINAL -LINE CONTROL SIGNALLING (IPAT-LCS) |
| CAN/CSA-CISPR 32:17 | Electromagnetic compatibility of multimedia equipment — Emission requirements (Adopted IEC CISPR 32:2015, second edition, 2015-03, with Canadian deviations) | Compatibilité électromagnétique des équipements multimédia — Exigences d’émission (norme IEC CISPR 32:2015 adoptée, deuxième édition, 2015-03, avec exigences propres au Canada) |
| I.S. EN 55035:2017 | ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS |
| IEC 60728-5:2015 | Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
| EN 50081-1:1992 | Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry |
| ISO 8802-3:1989 | Information processing systems Local and metropolitan area networks Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
| EN 50083-7 : 1996 COR 2007 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 7: SYSTEM PERFORMANCE |
| IEEE 802-2014 | IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture |
| EN 60950:2000/corrigendum:2002 | SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT |
| EN 50083-10:2002 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
| IEEE 802.1Q-2014 | IEEE Standard for Local and metropolitan area networks--Bridges and Bridged Networks |
| EN 300 429 : 1.2.1 | DIGITAL VIDEO BROADCASTING (DVB): FRAMING STRUCTURE, CHANNEL CODING AND MODULATION FOR CABLE SYSTEMS |
| EN 50083-2:2012/A1:2015 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| ISO/IEC 10039:1991 | Information technology — Open Systems Interconnection — Local area networks — Medium Access Control (MAC) service definition |
| EN 50083-1:1993/A2:1997 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1: SAFETY REQUIREMENTS |
| EG 201 212 : 1.2.1 | ELECTRICAL SAFETY - CLASSIFICATION OF INTERFACES FOR EQUIPMENT TO BE CONNECTED TO TELECOMMUNICATIONS NETWORKS |
| EN 50082-1:1997 | Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.