ETS 300 342-3 : 20001

1 Scope
2 References
3 Definitions and abbreviations
  3.1 Definitions
  3.2 Abbreviations
4 General test
  4.1 Test conditions
  4.2 General test configuration
  4.3 Test conditions for immunity tests
  4.4 Normal test modulation for base Stations
  4.5 Arrangements for test signals at the input of
      the transmitter and the output of the receiver
  4.6 Arrangements for test signals at the output of
      the transmitter
  4.7 Arrangements for test signals at the input of
      the receiver
  4.8 Base station receiver exclusion band
  4.9 Base station transmitter exclusion band
  4.10 Narrow band responses in receiver immunity
       tests
  4.11 Repeater and ancillary RF amplifier exclusion
       band
  4.12 Arrangements for testing of equipment with an
       integral antenna
5 Performance assessment
  5.1 General
  5.2 Assessment of BER at the output of a transmitter
  5.3 Assessment of BER at the output of a receiver
  5.4 Performance assessment of repeaters and
      ancillary RF amplifiers
6 Performance criteria
  6.1 Performance criteria for Continuous phenomena
      applied to Transmitters (CT)
  6.2 Performance criteria for Transient phenomena
      applied to Transmitters (TT)
  6.3 Performance criteria for Continuous phenomena
      applied to Receivers (CRx)
  6.4 Performance criteria for Transient phenomena
      applied to Receivers (TRx)
  6.5 Performance criteria for Continuous phenomena
      applied to Repeaters and Ancillary RF Amplifiers
      (CRptr)
  6.6 Performance criteria for Transient phenomena
      applied to Repeaters and Ancillary RF Amplifiers
      (TRptr)
7 Applicability overview tables
  7.1 Emission
  7.2 Immunity
  7.3 Applicability of tests for ancillary RF
      amplifiers
8 Test methods and limits for emission tests of base
  stations, repeaters, ancillary RF amplifiers and/or
  ancillary equipment
  8.1 Enclosure port, ancillary equipment
  8.2 DC power input/output port
  8.3 AC mains power input/output ports
  8.4 Antenna port, ancillary RF amplifiers
  8.5 Enclosure, ancillary RF amplifiers
  8.6 Signal and control line ports
9 Test methods and levels for immunity tests of base
  stations, repeaters, ancillary RF amplifiers and/or
  ancillary equipment
  9.1 RF electromagnetic field (80 MHz to 1000 MHz)
  9.2 Electrostatic discharge
  9.3 Fast transients common mode
  9.4 RF common mode, 0,15 MHz to 80 MHz
  9.5 Voltage dips and interruptions
  9.6 Surges, common and differential mode
  9.7 RF conducted immunity, ancillary RF amplifiers
Annex A (normative): Subclauses of this ETS relevant
                     for compliance with the essential
                     requirements of the EC Council
                     Directive 89/336/EEC
Annex B (normative): Method of assessment of
                     Performance for Continuous
                     phenomena applied to Repeaters
                     and Ancillary RF Amplifiers
                     (CRptr)
  B.1 Test purpose
  B.2 Test method
  B.3 Performance assessment
Annex C (normative): Method of assessment of
                     Performance for Transient
                     phenomena applied to Repeaters
                     and Ancillary RF Amplifiers
                     (TRptr)
  C.1 Test purpose
  C.2 Test method
  C.3 Performance assessment
Annex D (normative): Test of RF conducted immunity,
                     antenna port of ancillary RF
                     amplifiers
  D.1 Definition
  D.2 Test method
Annex E (normative): Clauses and/or subclauses of this
                     ETS relevant for compliance with
                     essential requirements of the
                     EC Council Directives
  E.1 Spurious emissions from the transmitter antenna
      connector, inside the BTS transmit band
  E.2 Spurious emissions from the transmitter antenna
      connector, outside the BTS transmit band
  E.3 Spurious emissions from the receiver antenna
      connector
  E.4 Radiated spurious emissions
  E.5 Blocking characteristics
Annex F (normative): ERC Decision of 20 March 1998
                     on the adoption of approval
                     regulations for equipment to be
                     used in the land mobile service
                     as Base Station System (BSS)
                     equipment for the GSM Digital
                     Cellular Communications system
                     (Phase 2) based on the Interim
                     European Telecommunication
                     Standard (IETS) 300 609-1 Part 1:
                     radio aspects (ERC/DEC/(98)06)
Annex G (normative): ERC Decision of 20 March 1998
                     on the adoption of approval
                     regulations for equipment to be
                     used in the land mobile service
                     as Base Station System (BSS)
                     repeaters for the GSM Digital
                     Cellular Communications (Phase 2
                     and Phase 2+) based on the
                     European Telecommunication
                     Standard (ETS) 609-4 Part 4:
                     Repeaters (ERC/DEC/(98)07)
Annex H (normative): Spurious emissions requirements
                     for repeaters
  H.1 Test purpose
  H.2 Test case
  H.3 Conformance requirement
  H.4 Reference requirement
Annex I (informative): Bibliography
History

Provides the EMC requirements for GSM (phase 2) 900 MHz and DCS 1800 MHz equipment. It expands the provisions of ETS 300 342-2 to cover GSM Phase 2 (including DCS 1800) as well as bringing it into line with ETR 238. It is intended that this shall become a harmonised standard, the reference of which is intended to be published in the Official Journal of the European Communities referencing the EMC Directive.