• There are no items in your cart

FAA AC 43.13-1 : 0

Current

Current

The latest, up-to-date edition.

ACCEPTABLE METHODS, TECHNIQUES, AND PRACTICES - AIRCRAFT INSPECTION AND REPAIR

Available format(s)

Hardcopy , PDF

Language(s)

English

€71.79
Excluding VAT

CHAPTER 1. WOOD STRUCTURE
   SECTION 1. MATERIALS AND PRACTICES
   SECTION 2. HEALTH AND SAFETY
   SECTION 3. INSPECTION
   SECTION 4. REPAIRS
   SECTION 5. FINISHING WOOD STRUCTURES
CHAPTER 2. FABRIC COVERING
   SECTION 1. PRACTICES AND PRECAUTIONS
   SECTION 2. APPLICATION OF DOPE
   SECTION 3. INSPECTION AND TESTING
   SECTION 4. REPAIRS TO FABRIC COVERING
CHAPTER 3. FIBERGLASS AND PLASTICS
   SECTION 1. REPAIR OF LIGHT LOAD LAMINATE STRUCTURES
   SECTION 2. METALLIC SANDWICH SECONDARY STRUCTURE REPAIRS
   SECTION 3. TRANSPARENT PLASTICS
   SECTION 4. WINDSHIELDS, ENCLOSURES, AND WINDOWS
CHAPTER 4. METAL STRUCTURE, WELDING, AND BRAZING
   SECTION 1. IDENTIFICATION OF METALS
   SECTION 2. TESTING OF METALS
   SECTION 3. PRECAUTIONARY MEASURES
   SECTION 4. METAL REPAIR PROCEDURES
   SECTION 5. WELDING AND BRAZING
   SECTION 6. WELDING AND BRAZING SAFETY
CHAPTER 5. NONDESTRUCTIVE INSPECTION (NDI)
   SECTION 1. GENERAL
   SECTION 2. VISUAL INSPECTION
   SECTION 3. EDDY CURRENT INSPECTION
   SECTION 4. MAGNETIC PARTICLE INSPECTION
   SECTION 5. PENETRANT INSPECTION
   SECTION 6. RADIOGRAPHY (X-RAY) INSPECTION
   SECTION 7. ULTRASONIC INSPECTION
   SECTION 8. TAP TESTING
   SECTION 9. ACOUSTIC-EMISSION
   SECTION 10. THERMOGRAPHY
   SECTION 11. HOLOGRAPHY
   SECTION 12. SHEAROGRAPHY
CHAPTER 6. CORROSION, INSPECTION & PROTECTION
   SECTION 1. GENERAL
   SECTION 2. TYPES OF CORROSION
   SECTION 3. CORROSION PROTECTION MEASURES FOR BASIC
               MATERIALS
   SECTION 4. CORROSION PREVENTIVE MAINTENANCE
   SECTION 5. VISUAL CORROSION INSPECTION GUIDE FOR AIRCRAFT
   SECTION 6. CORROSION REMOVAL PROCEDURES
   SECTION 7. BASIC CORROSION REMOVAL TECHNIQUES
   SECTION 8. ALUMINUM AND ALUMINUM ALLOYS
   SECTION 9. MAGNESIUM AND MAGNESIUM ALLOYS
   SECTION 10. FERROUS METALS
   SECTION 11. OTHER METALS AND ALLOYS
   SECTION 12. PLATED PARTS
   SECTION 13. CORROSION PROOFING OF LAND PLANES CONVERTED
               TO SEA PLANES
   SECTION 14. HANDLING AND CARE OF AIRCRAFT RECOVERED FROM
               WATER IMMERSION
CHAPTER 7. AIRCRAFT HARDWARE, CONTROL CABLES, AND TURNBUCKLES
   SECTION 1. RIVETS
   SECTION 2. SCREWS
   SECTION 3. BOLTS
   SECTION 4. NUTS
   SECTION 5. WASHERS
   SECTION 6. PINS
   SECTION 7. SAFETYING
   SECTION 8. INSPECTION AND REPAIR OF CONTROL CABLES AND
               TURNBUCKLES
   SECTION 9. TURNBUCKLES
   SECTION 10. SAFETY METHODS FOR TURNBUCKLES
   SECTION 11. HARDWARE IDENTIFICATION TABLES
CHAPTER 8. ENGINES, FUEL, EXHAUST, AND PROPELLERS
   SECTION 1. ENGINES
   SECTION 2. FUEL SYSTEMS
   SECTION 3. EXHAUST SYSTEMS
   SECTION 4. REPAIR OF METAL PROPELLERS
   SECTION 5. INSPECTION OF PROPELLERS
   SECTION 6. PROPELLER TRACKING AND VIBRATION
CHAPTER 9. AIRCRAFT SYSTEMS AND COMPONENTS
   SECTION 1. INSPECTION AND MAINTENANCE OF LANDING GEAR
   SECTION 2. HYDRAULIC SYSTEMS
   SECTION 3. EMERGENCY EQUIPMENT
   SECTION 4. CABIN INTERIOR
CHAPTER 10. WEIGHT AND BALANCE
   SECTION 1. TERMINOLOGY
   SECTION 2. WEIGHING PROCEDURES
CHAPTER 11. AIRCRAFT ELECTRICAL SYSTEMS
   SECTION 1. INSPECTION AND CARE OF ELECTRICAL SYSTEMS
   SECTION 2. STORAGE BATTERIES
   SECTION 3. INSPECTION OF EQUIPMENT INSTALLATION
   SECTION 4. INSPECTION OF CIRCUIT-PROTECTION DEVICES
   SECTION 5. ELECTRICAL WIRE RATING
   SECTION 6. AIRCRAFT ELECTRICAL WIRE SELECTION
   SECTION 7. TABLE OF ACCEPTABLE WIRES
   SECTION 8. WIRING INSTALLATION INSPECTION REQUIREMENTS
   SECTION 9. ENVIRONMENTAL PROTECTION AND INSPECTION
   SECTION 10. SERVICE LOOP HARNESSES (PLASTIC TIE STRIPS)
   SECTION 11. CLAMPING
   SECTION 12. WIRE INSULATION AND LACING STRING TIE
   SECTION 13. SPLICING
   SECTION 14. TERMINAL REPAIRS
   SECTION 15. GROUNDING AND BONDING
   SECTION 16. WIRE MARKING
   SECTION 17. CONNECTORS
   SECTION 18. CONDUITS
   SECTION 19. PROTECTION OF UNUSED CONNECTORS
   SECTION 20. ELECTRICAL AND ELECTRONIC SYMBOLS
CHAPTER 12. AIRCRAFT AVIONICS SYSTEMS
   SECTION 1. AVIONICS EQUIPMENT MAINTENANCE
   SECTION 2. GROUND OPERATIONAL CHECKS FOR AVIONICS
               EQUIPMENT (ELECTRICAL)
   SECTION 3. GROUND OPERATIONAL CHECKS FOR AVIONICS
               EQUIPMENT (NON ELECTRICAL)
   SECTION 4. PITOT/STATIC SYSTEM
   SECTION 5. AVIONICS TEST EQUIPMENT
CHAPTER 13. HUMAN FACTORS
APPENDIX 1. GLOSSARY (10 PAGES)
APPENDIX 2. ACRONYMS AND ABBREVIATIONS (4 PAGES)
APPENDIX 3. METRIC-BASED PREFIXES AND POWERS OF 10 (1 PAGE)

Gives methods, techniques, and practices acceptable to the Administrator for the inspection and repair of non pressurized areas of civil aircraft, only when there are no manufacturer repair or maintenance instructions.

DocumentType
Standard
Pages
34
PublisherName
Federal Aviation Administration
Status
Current

FAA AC 43.13-2 : 2008 ACCEPTABLE METHODS, TECHNIQUES, AND PRACTICES - AIRCRAFT ALTERATIONS
SAE ARP 1315 : 2013 SAFETY CONSIDERATIONS FOR AIRPLANE LAVATORIES
FAA AC 91-59 : 2007 INSPECTION AND CARE OF GENERAL AVIATION AIRCRAFT EXHAUST SYSTEMS
FAA 8300.16 : 2014 MAJOR REPAIR AND ALTERATION DATA APPROVAL
FAA AC 25.1701-1 : 2007 CERTIFICATION OF ELECTRICAL WIRING INTERCONNECTION SYSTEMS ON TRANSPORT CATEGORY AIRPLANES
FAA AC 43-215 : 2017 STANDARDIZED PROCEDURES FOR PERFORMING AIRCRAFT MAGNETIC COMPASS CALIBRATION
FAA AC 20-184 : 2015 GUIDANCE ON TESTING AND INSTALLATION OF RECHARGEABLE LITHIUM BATTERY AND BATTERY SYSTEMS ON AIRCRAFT
SAE AIR 4165 : 2012 GENERAL REQUIREMENTS FOR POWERED DRIVE UNITS IN AIRCRAFT CARGO SYSTEMS
SAE ARP 5614 : 2014 GUIDELINES FOR HARNESS CRITICAL CLAMP LOCATOR MARKER INSTALLATION ON ELECTRICAL CABLE ASSEMBLIES
FAA AC 120-77 : 0 MAINTENANCE AND ALTERATION DATA
FAA AC 147-3 : 2015 CERTIFICATION AND OPERATION OF AVIATION MAINTENANCE TECHNICIAN SCHOOLS
FAA AC 43-204 : 1997 VISUAL INSPECTION FOR AIRCRAFT
MIL-HDBK-516 Revision C:2014 AIRWORTHINESS CERTIFICATION CRITERIA
FAA AC 33-6 : 2017 WELD REPAIR OF ALUMINUM CRANKCASES AND CYLINDERS OF PISTON ENGINES
FAA AC 25-27 : 2010 DEVELOPMENT OF TRANSPORT CATEGORY AIRPLANE ELECTRICAL WIRING INTERCONNECTION SYSTEMS INSTRUCTIONS FOR CONTINUED AIRWORTHINESS USING AN ENHANCED ZONAL ANALYSIS PROCEDURE
FAA AC 25-16 : 0 ELECTRICAL FAULT AND FIRE PREVENTION AND PROTECTION
SAE ARP 5647 : 2014 HIGH INTENSITY DISCHARGE LIGHT SOURCES
FAA 8110.104 : 2007 RESPONSIBILITIES AND REQUIREMENTS FOR IMPLEMENTING PART 26 SAFETY INITIATIVES
SAE AIR 5575 : 2017 HOT STAMP WIRE MARKING CONCERNS FOR AEROSPACE VEHICLE APPLICATIONS
ARINC 628-5 : 2013 CABIN EQUIPMENT INTERFACES (CEI) - PART 5: CABIN ELECTRICAL EQUIPMENT AND WIRING INSTALLATION GUIDELINES
FAA AC 135-15 : 0 EMERGENCY MEDICAL SERVICES/AIRPLANE (EMS/A)
FAA AC 20-82 : 1972
ARINC 809-3 : 2014 3GCN - SEAT DISTRIBUTION SYSTEM
FAA AC 25-26 : 2007 DEVELOPMENT OF STANDARD WIRING PRACTICES DOCUMENTATION
FAA AC 65-2 : 0 AIRFRAME AND POWERPLANT MECHANICS CERTIFICATION GUIDE
FAA AC 43-18 : 2011 FABRICATION OF AIRCRAFT PARTS BY MAINTENANCE PERSONNEL
FAA AC 25-10 : 0 GUIDANCE FOR INSTALLATION OF MISCELLANEOUS, NON-REQUIRED ELECTRICAL EQUIPMENT
FAA 8110.54 : 2010 INSTRUCTIONS FOR CONTINUED AIRWORTHINESS RESPONSIBILITIES, REQUIREMENTS, AND CONTENTS
FAA AC 43-214 : 2016 REPAIRS AND ALTERATIONS TO COMPOSITE AND BONDED AIRCRAFT STRUCTURE
FAA AC 20-37 : 2005 AIRCRAFT PROPELLER MAINTENANCE
FAA AC 23-21 : 2004 AIRWORTHINESS COMPLIANCE CHECKLISTS USED TO SUBSTANTIATE MAJOR ALTERATIONS FOR SMALL AIRPLANES
FAA AC 20-84 : 1973
MIL-HDBK-525 Base Document:2013 ELECTRICAL WIRING INTERCONNECT SYSTEM (EWIS) INTEGRITY PROGRAM
FAA AC 91-82 : 2012 FATIGUE MANAGEMENT PROGRAMS FOR IN-SERVICE ISSUES
FAA AC 20-138 : 2014 AIRWORTHINESS APPROVAL OF POSITIONING AND NAVIGATION SYSTEMS
FAA AC 91-91 : 2016 MAINTAINING PUBLIC AIRCRAFT
SAE ARP 1532 : 2015 AIRCRAFT OXYGEN SYSTEM LINES, FABRICATION, TEST AND INSTALLATION
SAE AIR 4004 : 2015 GUIDE FOR INSTALLATION OF ELECTRICAL WIRE AND CABLE ON AIRCRAFT LANDING GEAR
ARINC 808 : 2010 3GCN - CABIN DISTRIBUTION SYSTEM
FAA AC 65-11 : B AIRFRAME AND POWER PLANT MECHANICS CERTIFICATION INFORMATION
FAA AC 20-83 : 1973 CHG 2 1975
FAA AC 43-210 : 2016 STANDARDIZED PROCEDURES FOR OBTAINING APPROVAL OF DATA USED IN THE PERFORMANCE OF MAJOR REPAIRS AND MAJOR ALTERATIONS
ASTM F 3245 : 2017 Standard Guide for Aircraft Electronics Technician Personal Certification
FAA AC 20-62 : 2010 ELIGIBILITY, QUALITY, AND IDENTIFICATION OF AERONAUTICAL REPLACEMENT PARTS

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.