FAA AC 43.13-2 : 2008
Current
The latest, up-to-date edition.
ACCEPTABLE METHODS, TECHNIQUES, AND PRACTICES - AIRCRAFT ALTERATIONS
Hardcopy , PDF
English
01-01-2008
CHAPTER 1. STRUCTURAL DATA
CHAPTER 2. COMMUNICATION, NAVIGATION, AND EMERGENCY LOCATOR
TRANSMITTER SYSTEM INSTALLATIONS
CHAPTER 3. ANTENNA INSTALLATION
CHAPTER 4. ANTICOLLISION AND SUPPLEMENTARY LIGHT INSTALLATION
CHAPTER 5. SKI INSTALLATIONS
CHAPTER 6. OXYGEN SYSTEM INSTALLATIONS IN NONPRESSURIZED
AIRCRAFT
Section 1. General
Section 2. Installation of the Oxygen system
Section 3. Airworthiness Compliance Check Sheet: Oxygen System
Installation in Un-pressurized Aircraft
CHAPTER 7. ROTORCRAFT EXTERNAL-LOAD-DEVICE INSTALLATIONS CARGO
SLINGS AND EXTERNAL RACKS
Section 1. General
Section 2. Cargo Racks
CHAPTER 8. GLIDER AND BANNER TOW-HITCH INSTALLATIONS
CHAPTER 9. SHOULDER HARNESS INSTALLATIONS
Section 1. General
Section 2. Geometry and Attachment
Section 3. Static Strength and Testing
Section 4. Installation and Inspection Checklists
CHAPTER 10. AIRCRAFT BATTERY INSTALLATIONS
Section 1. General
Section 2. Lead Acid Battery Installations
Section 3. Nickel-Cadmium Battery Installations
Section 4. Battery Installation Checklist
Section 5. Instructions for Continued Airworthiness
CHAPTER 11. ADDING OR RELOCATING INSTRUMENTS
CHAPTER 12. CARGO TIEDOWN DEVICE INSTALLATIONS
Provides methods, techniques, and practices acceptable to the Administrator for the inspection and alteration on non-pressurized areas of civil aircraft of 12,500 lbs gross weight or less.
DocumentType |
Standard
|
Pages |
137
|
PublisherName |
Federal Aviation Administration
|
Status |
Current
|
SAE ARP 1315 : 2013 | SAFETY CONSIDERATIONS FOR AIRPLANE LAVATORIES |
FAA 8300.16 : 2014 | MAJOR REPAIR AND ALTERATION DATA APPROVAL |
FAA AC 20-184 : 2015 | GUIDANCE ON TESTING AND INSTALLATION OF RECHARGEABLE LITHIUM BATTERY AND BATTERY SYSTEMS ON AIRCRAFT |
FAA AC 20-30 : 0 | AIRCRAFT POSITION LIGHT AND ANTICOLLISION LIGHT INSTALLATIONS |
FAA AC 120-77 : 0 | MAINTENANCE AND ALTERATION DATA |
FAA AC 147-3 : 2015 | CERTIFICATION AND OPERATION OF AVIATION MAINTENANCE TECHNICIAN SCHOOLS |
FAA AC 20-177 : 2012 | DESIGN AND INSTALLATION GUIDANCE FOR AN AIRBORNE SYSTEM FOR NON-REQUIRED TELECOMMUNICATION SERVICE IN NON-AERONAUTICAL FREQUENCY BANDS |
FAA AC 25-16 : 0 | ELECTRICAL FAULT AND FIRE PREVENTION AND PROTECTION |
FAA AC 135-15 : 0 | EMERGENCY MEDICAL SERVICES/AIRPLANE (EMS/A) |
FAA AC 65-2 : 0 | AIRFRAME AND POWERPLANT MECHANICS CERTIFICATION GUIDE |
FAA AC 43-18 : 2011 | FABRICATION OF AIRCRAFT PARTS BY MAINTENANCE PERSONNEL |
FAA AC 25-10 : 0 | GUIDANCE FOR INSTALLATION OF MISCELLANEOUS, NON-REQUIRED ELECTRICAL EQUIPMENT |
FAA AC 43-214 : 2016 | REPAIRS AND ALTERATIONS TO COMPOSITE AND BONDED AIRCRAFT STRUCTURE |
FAA AC 23-21 : 2004 | AIRWORTHINESS COMPLIANCE CHECKLISTS USED TO SUBSTANTIATE MAJOR ALTERATIONS FOR SMALL AIRPLANES |
FAA AC 20-138 : 2014 | AIRWORTHINESS APPROVAL OF POSITIONING AND NAVIGATION SYSTEMS |
FAA AC 91-91 : 2016 | MAINTAINING PUBLIC AIRCRAFT |
FAA AC 20-149 : 2015 | INSTALLATION GUIDANCE FOR DOMESTIC FLIGHT INFORMATION SERVICE - BROADCAST |
FAA AC 65-11 : B | AIRFRAME AND POWER PLANT MECHANICS CERTIFICATION INFORMATION |
FAA AC 43-210 : 2016 | STANDARDIZED PROCEDURES FOR OBTAINING APPROVAL OF DATA USED IN THE PERFORMANCE OF MAJOR REPAIRS AND MAJOR ALTERATIONS |
ASTM F 3245 : 2017 | Standard Guide for Aircraft Electronics Technician Personal Certification |
FAA AC 20-62 : 2010 | ELIGIBILITY, QUALITY, AND IDENTIFICATION OF AERONAUTICAL REPLACEMENT PARTS |
FAA AC 27-1 : 2008 | CERTIFICATION OF NORMAL CATEGORY ROTORCRAFT |
SAE AIR825D | OXYGEN EQUIPMENT FOR AIRCRAFT |
FAA AC 21-34 : 0 | SHOULDER HARNESS-SAFETY BELT INSTALLATIONS |
SAE AS 8043 : 2014 | RESTRAINT SYSTEMS FOR CIVIL AIRCRAFT |
FAA AC 20-106 : 1978 | AIRCRAFT INSPECTION FOR THE GENERAL AVIATION AIRCRAFT OWNER |
FAA 8310.6 : 1969 CHG 1 1985 | AIRWORTHINESS COMPLIANCE CHECK SHEET HANDBOOK |
FAA AC 91-65 : 0 | |
SAE AIR822C | OXYGEN SYSTEMS FOR GENERAL AVIATION |
FAA AC 23-17 : 2011 | SYSTEMS AND EQUIPMENT GUIDE FOR CERTIFICATION OF PART 23 AIRPLANES AND AIRSHIPS |
FAA AC 43-4 : A | CORROSION CONTROL FOR AIRCRAFT |
FAA 8110.54 : 2010 | INSTRUCTIONS FOR CONTINUED AIRWORTHINESS RESPONSIBILITIES, REQUIREMENTS, AND CONTENTS |
FAA AC 43.13-1 : 0 | ACCEPTABLE METHODS, TECHNIQUES, AND PRACTICES - AIRCRAFT INSPECTION AND REPAIR |
FAA AC 120-27 : 2005 | AIRCRAFT WEIGHT AND BALANCE CONTROL |
FAA AC 43-210 : 2016 | STANDARDIZED PROCEDURES FOR OBTAINING APPROVAL OF DATA USED IN THE PERFORMANCE OF MAJOR REPAIRS AND MAJOR ALTERATIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.