FD CR 10313 : 2000 FD
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
15-06-2016
12-01-2013
Le présent document classe les nuances d'acier figurant dans les normes européennes en aciers non alliés et alliés.
DevelopmentNote |
Indice de classement: A02-030FD. FD CR 10313 September 2000. (01/2004)
|
DocumentType |
Miscellaneous Product
|
PublisherName |
Association Francaise de Normalisation
|
Status |
Withdrawn
|
NF EN 10142 : 2000 | BANDES ET TOLES EN ACIERS DOUX GALVANISEES A CHAUD ET EN CONTINU POUR FORMAGE A FROID - CONDITIONS TECHNIQUES DE LIVRAISON |
NF ENV 10080 : 1995 | ACIER POUR L'ARMATURE DU BETON - ARMATURES POUR BETON ARME SOUDABLES A VERROUS B500 - CONDITIONS TECHNIQUES DE LIVRAISONS POUR LES BARRES, LES COURONNES ET LES TREILLIS SOUDES |
NF EN 10149-2 : 2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
NF EN 10120 : 2017 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
NF EN 10084 : 2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
NF EN 10083-3 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
NF EN 10267 : 1998 | FERRITIC-PEARLITE STEELS FOR PRECIPITATION HARDENING FROM HOT-WORKING TEMPERATURES |
NF EN 10152 : 2017 | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
NF EN 10025 : 1993 | PRODUITS LAMINES A CHAUD EN ACIERS DE CONSTRUCTION NON ALLIES - CONDITIONS TECHNIQUES DE LIVRAISON |
NF EN 10137-3 : 1995 | TOLES ET LARGES PLATS EN ACIERS DE CONSTRUCTION A HAUTE LIMITE D'ELASTICITE A L'ETAT TREMPE ET REVENU OU DURCI PRECIPITATION PARTIE 3: CONDITIONS DE LIVRAISON DES ACIERS DURCIS PAR PRECIPITATION |
NF EN 10106 : 2015 | COLD ROLLED NON-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
NF EN 10087 : 1998 | FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS |
NF EN 10208-2 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
NF EN 10107 : 2014 | GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
NF EN 10265 : 1997 | MAGNETIC MATERIALS - SPECIFICATION FOR STEEL SHEET AND STRIP WITH SPECIFIED MECHANICAL PROPERTIES AND MAGNETIC PERMEABILITY |
NF EN 10139 : 2016 | COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
NF EN 10016-2 : 1995 | NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING - PART 2: SPECIFIC REQUIREMENTS FOR GENERAL PURPOSES ROD |
NF EN 10273 : 2016 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
NF EN 10203 : 1991 | |
NF EN 10147 : 2000 | BANDES ET TOLES EN ACIERS DE CONSTRUCTION GALVANISEES A CHAUD EN CONTINU - CONDITIONS TECHNIQUES DE LIVRAISON |
NF EN 10137-2 : 1995 | TOLES ET LARGES PLATS EN ACIERS DE CONSTRUCTION A HAUTE LIMITE D'ELASTICITIE A L'ETAT TREMPE ET REVENU OU DURCI PAR PRECIPITATION - PARTIE 2: CONDITIONS DE LIVRAISON DES ACIERS A L'ETAT TREMPE ET REVENU |
NF EN 10028-7 : 2016 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS |
NF EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
NF EN 10222-2 : 2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURES PROPERTIES |
NF EN 10207 : 2005 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
NF EN 10219-1 : 2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
NF EN 10209 : 2013 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
NF EN 10249-1 : 1995 | COLD FORMED SHEET PILING OF NON-ALLOY STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
NF EN 10088-2 : 2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
NF EN 10222-5 : 2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
NF EN 10083-1 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
NF EN 10113-2 : 1993 | PRODUITS LAMINES A CHAUD EN ACIERS DE CONSTRUCTION SOUDABLES A GRAINS FINS - PARTIE 2: CONDITIONS DE LIVRAISON DES ACIERS A L'ETAT NORMALISE/LAMINAGE NORMALISANT |
NF EN 10126 : 1996 | COLD ROLLED ELECTRICAL NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
NF EN 10088-1 : 2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
NF EN 10271 : 1999 | ELECTROLYTICALLY ZINC-NICKEL (ZN) COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
NF EN 10213-3 : 1996 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 3: STEEL GRADES FOR USE AT LOW TEMPERATURES |
NF EN 10016-3 : 1995 | NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING - PART 3: SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE LOW CARBON STEEL ROD |
NF EN 10213-2 : 1996 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 2: STEEL GRADES FOR USE AT ROOM TEMPERATURE AND ELEVATED TEMPERATURES |
NF EN 10016-4 : 1995 | NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING - PART 4: SPECIFIC REQUIREMENTS FOR ROD FOR SPECIAL APPLICATIONS |
NF EN 10222-3 : 2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 3: NICKEL STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
NF EN 10215 : 1995 | BANDES ET TOLES EN ACIER REVETUES D'ALLIAGE ALUMINIUM-ZINC (AZ) A CHAUD EN CONTINU - CONDITIONS TECHNIQUES DE LIVRAISON |
NF EN 10165 : 1996 | COLD ROLLED ELECTRICAL ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
NF EN 10208-1 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
NF EN 10154 : 2002 | BANDES ET TOLES EN ACIER REVETUES EN CONTINU PAR IMMERSION A CHAUD D'UNE COUCHE D'ALUMINIUM-SILICIUM (AS) - CONDITIONS TECHNIQUES DE LIVRAISON |
NF EN 10222-4 : 2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH |
NF EN 10020 : 2000 | DEFINITION AND CLASSIFICATION OF GRADES OF STEEL |
NF EN 10149-3 : 2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED OR NORMALIZED ROLLED STEELS |
NF EN 10283 : 2010 | CORROSION RESISTANT STEEL CASTINGS |
NF EN 10248-1 : 1995 | HOT ROLLED SHEET PILING OF NON-ALLOY STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
NF EN 10083-2 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
NF EN 10202 : 2002 | COLD REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE AND ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE COATED STEEL |
NF EN 10130 : 2007 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
NF EN 10214 : 1995 | BANDES ET TOLES EN ACIERREVETUES A CHAUD EN CONTINU D'ALLIAGE ZINC-ALUMINIUM (ZA) - CONDITIONS TECHNIQUES DE LIVRAISON |
NF EN 10205 : 2017 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
NF EN 10268 : 2007 + A1 2013 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
NF EN 10113-3 : 1993 | PRODUITS LAMINES A CHAUD EN ACIERS DE CONSTRUCTION SOUDABLES A GRAINS FINS - PARTIE 3: CONDITIONS DE LIVRAISON DES ACIERS OBTENUS PAR LAMINAGE THERMOMECANIQUE |
NF EN 10090 : 1998 | VALVE STEELS AND ALLOYS FOR INTERNAL COMBUSTION ENGINES |
NF EN 10210-1 : 2006 | HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
NF EN 10155 : 1993 | |
NF EN 10213-4 : 1996 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 4: AUSTENITIC AND AUSTENITIC-FERRITIC STEEL GRADES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.