FF-B-584 Revision F:1989
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Bolts, Square Neck and Tee Head (S/Sby ASME-B18.5, ASME-B18.9,and ASME-B18.18.1M)
07-12-1989
03-08-1993
1. SCOPE AND CLASSIFICATION
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
Covers various types of bolts, 0.190 inch or larger in diameter with either semispherical of countersunk heads
| DevelopmentNote |
F NOTICE 1 - Notice of Cancellation/Superseded by ASME B18.5, ASME B18.9 and ASME B18.18.1M Supersedes FF B 571 (A) (03/2004)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| Supersedes |
This specification covers bolts, 0.190 inch in diameter and larger, with heads which are either semispherical or designed to set flush with the surface of the item being fastened.
| MIL-STD-1689 Revision A:1990 | FABRICATION, WELDING, AND INSPECTION OF SHIPS STRUCTURE |
| MIL-T-53048 Revision C:1991 | Tank, Fabric, Collapsible; Air Column Supported, Open Top, Water Storage 3000 Gallons |
| MIL-B-53102 Base Document:1990 | Berm Liner Assemblies, Arctic Service (No S/S Document) |
| MIL-C-104 Revision C:1992 | Crates, Wood: Lumber and Plywood Sheathed, Nailed, and Bolted (S/S by ASTM-D7478/D7478M) |
| MIL-B-13164 Revision A:1973 | Bridge, Fixed, Steel, Highway, Semipermanent, 90-Foot Truss Span (No S/S Document) |
| MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE: 3,000, 10,000 AND 20,000 GALLON, PETROLEUM, LOW TEMPERATURE (NO S/S DOCUMENT) |
| MIL-T-52983 Revision G:1994 | Tanks, Fabric, Collapsible: 3,000, 10,000, 20,000, AND 50,000 Gallon, Fuel |
| MIL-T-53055 Revision C:1991 | Tank, 3000 Gallon and 4600 Gallon Fabric, Collapsible, Drinking Water, Semi-Trailer Mounted |
| MIL-C-3774 Revision B:1991 | Crates, Wood: Open 12,000- and 16,000-Pound Capacity (S/S by ASTM-D7478/D7478D) |
| MIL-C-52950 Revision A:1991 | Crates, Wood, Open and Covered (S/S by ASTM-D6039/D6039M) |
| MIL T 0053055 : B | TANK, 3000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| MIL-C-9897 Revision C:1992 | Crates, Slotted Angle, Steel or Aluminum, for Lightweight Airframe Components and Bulky Items (for Maximum Loads of 1363 KGS (3000 Pounds) (S/S by ASTM-D6255/D6255M) |
| MIL-STD-1186 Revision A:1981 | CUSHIONING, ANCHORING, BRACING, BLOCKING AND WATERPROOFING; WITH APPROPRIATE TEST METHODS (NO S/S DOCUMENT) |
| MIL-T-53029 Revision C:1994 | Tanks, Fabric, Collapsible: 3,000, 10,000, 20,000, and 50,000 Gallon, Drinking Water |
| MIL-B-26195 Revision C:1987 | Boxes, Wood-Cleated, Skidded, Load-Bearing Base (S/S by ASTM D6256/D6256M) |
| QQ C 591 : E NOTICE 1 | COPPER SILICON, COPPER ZINC SILICON, AND COPPER NICKEL SILICON ALLOYS, ROD, WIRE, SHAPES, FORGINGS, AND FLAT PRODUCTS (FLAT WIRE, STRIP, SHEET, BAR, AND PLATE |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| QQ-N-286 Revision G:2000 | NICKEL-COPPER-ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| FF-N-836 Revision E:1994 | Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| QQ-B-637 Revision A:1967 | Brass, Naval: Rod, Wire, Shapes, Forgings, and Flat Products with Finished Edges (Bar, Flat Wire, and Strip) (S/S by Portions of ASTM-B21,and ASTM-B21M, ASTM-B124and ASTM-B283) |
| QQ A 225/6 : E | ALUMINUM ALLOY BAR, ROD, AND WIRE, ROLLED, DRAWN OR COLD FINISHED, 2024 |
| MIL P 16232 : E | PHOSPHATE COATINGS, HEAVY MANGANESE OR ZINC BASE (FOR FERROUS METALS) |
| FED-STD-123 Revision H:2007 | Marking for Shipment (Civil Agencies) |
| PPP-H-1581 Revision A:1977 | Hardware (Fasteners and Related Items), Packaging of (S/S by ASTM-D3951 or Mil-Std-2073-) |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES, AND FORGINGS; CORROSION RESISTANT (S/S BY SAE-AMS-QQ-S-763) |
| QQ-B-639 Revision C:2016 | Brass, Naval: Flat Products |
| MIL-H-6088 Revision G:1991 | Heat Treatment of Aluminum Alloys (S/S by SAE-AMS-H-6088) |
| QQ-B-750 Base Document:1961 | Bronze, Phosphor; Bar, Plate, Rod, Sheet, Strip, Flat Wire, and Structural and Special Shaped Sections (S/S by ASTM-B139) |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| QQ-P-416 Revision F:1991 | Plating, Cadmium (Electrodeposited) (S/Sby SAE-AMS-QQ-P-416) |
| QQ-B-728 Base Document:1961 | Bronze Manganese; Rod, Shapes, Forgings, and Flat Products (Flat Wire, Strip, Sheet, Bar, and Plates) (S/S by ASTM-B138) |
| MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.