FM 4450 : 1989

I. INTRODUCTION
     1.1 Purpose
     1.2 Scope
     1.3 Basis for FM Approval
     1.4 Basis for Continued Approval
     1.5 Basis for Requirements
     1.6 Effective Date
     1.7 System of Units
II. GENERAL INFORMATION
     2.1 Product Information
     2.2 Requirement
III. APPLICABLE DOCUMENTS AND GLOSSARY
     3.1 Applicable Documents
     3.2 Glossary
IV. GENERAL REQUIREMENTS
     4.1 Markings
     4.2 Installation Instructions
V. PERFORMANCE REQUIREMENTS
     5.1 Combustibility
     5.2 Wind Uplift Resistance
     5.3 Resistance to Foot Traffic
     5.4 Corrosion Resistance
     5.5 Impact Resistance
     5.6 Susceptibility to Heat Damage
VI. OPERATIONS REQUIREMENTS
     6.1 Demonstrated Quality Control Program
     6.2 Facilities and Procedures Audits (F&PA)
APPENDIX A: APPROVAL MARKS
APPENDIX B: FIRE HAZARD TEST PROCEDURE
  I. Introduction
  II. Fire Test Furnace
  III. Test Sample
  IV. Calibration of Test Equipment
  V. Fire Test Procedure
  VI. Test Results
  VII. Classification
APPENDIX C: FM APPROVALS 5 X 9 UPLIFT PRESSURE TEST PROCEDURE
  I. Introduction
  II. Design of Instrument
  III. Sample
  IV. Operation
  V. Results
APPENDIX D: UPLIFT PULL TEST PROCEDURE FOR CLASS 1 INSULATED
            STEEL DECK ROOFS
  I. Introduction
  II. Preparation of Test Panel
  III. Test Procedure
  IV. Test Results
APPENDIX E: CORROSION TEST PROCEDURE FOR FASTENERS AND STRESS
            DISTRIBUTION PLATES
  I. Introduction
  II. Test Procedure
  III. Evaluation of Results
APPENDIX F: IMPACT RESISTANCE TEST PROCEDURE FOR PLASTIC
            FASTENERS AND/OR STRESS DISTRIBUTION PLATES
            UTILIZED FOR CLASS 1 INSULATED STEEL DECK ROOFS
  I. Introduction
  II. Description of Test Apparatus
  III. Test Procedure
  IV. Evaluation of Results
APPENDIX G: SUSCEPTIBILITY TO HEAT DAMAGE TEST FOR CLASS 1
            ROOF INSULATIONS
  I. Introduction
  II. Description of Test Apparatus
  III. Test Procedure
  IV. Evaluation of Results
APPENDIX H: SMALL SCALE QC AND PHYSICAL PROPERTIES TEST FOR
            COMPONENTS IN CLASS 1 INSULATED STEEL DECK ROOFS
  I. Introduction
  II. Insulation Delamination Test
  III. Breaking Load Test
  IV. Small Scale Burn Tests
APPENDIX I: UNITS OF MEASUREMENT
APPENDIX J: FM APPROVALS 12 X 24 UPLIFT PRESSURE TEST PROCEDURE
  I. Introduction
  II. Summary of Test Method
  III. Design of Test Apparatus
  IV. Sample
  V. Operation
  VI. Results