EN ISO 14284:2002
|
Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
EN 10002-1 : 2001
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
EN 10052:1993
|
Vocabulary of heat treatment terms for ferrous products |
EN 10162:2003
|
Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
CR 10261 : 1995
|
ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
EN 10048:1996
|
Hot rolled narrow steel strip - Tolerances on dimensions and shape |
EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
EN 10079:2007
|
Definition of steel products |
EN 10025-4:2004
|
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
EN 10149-1:2013
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
EN 10027-2:2015
|
DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
EN 10221:1995
|
Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
EN 10268:2006+A1:2013
|
COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
EN 10056-2:1993
|
Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions |
EN 10164:2004
|
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
EN ISO 377:2017
|
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
EN ISO 643:2012
|
Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
EN 10279:2000
|
Hot rolled steel channels - Tolerances on shape, dimensions and mass |
EN 10149-2:2013
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels |
EN 10034:1993
|
Structural steel I and H sections - Tolerances on shape and dimensions |
EN 10248-1:1995
|
Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
EN 10277-2:2008
|
Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes |
EN 10168:2004
|
Steel products - Inspection documents - List of information and description |
EN ISO 2566-1:1999
|
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
ISO 17642-3:2005
|
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests |
EN 10024:1995
|
Hot rolled taper flange I sections - Tolerances on shape and dimensions |
EN 10210-1:2006
|
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
EN 1011-2:2001/A1:2003
|
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
EN 10045-1 : 1990
|
METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
EN 10308:2001
|
Non destructive testing - Ultrasonic testing of steel bars |
EN 10306:2001
|
Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams |
EN 10163-2:2004
|
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
EN 10163-1:2004/AC:2007
|
DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS |
EN 10060:2003
|
Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
PREN 10293 : DRAFT 2012
|
STEEL CASTING AND FORGINGS - STEEL CASTINGS FOR GENERAL ENGINEERING USES |
EN 10219-1:2006
|
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
EN 10021:2006
|
General technical delivery conditions for steel products |
EN 10017:2004
|
Steel rod for drawing and/or cold rolling - Dimensions and tolerances |
ISO 2566-1:1984
|
Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
EN 10250-2:1999
|
Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels |
EN 10025-5:2004
|
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
EN ISO 17642-1:2004
|
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17642-1:2004) |
EN 10163-3:2004
|
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
EN 10204:2004
|
Metallic products - Types of inspection documents |
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
ISO 9001:2015
|
Quality management systems — Requirements |
ISO 643:2012
|
Steels Micrographic determination of the apparent grain size |
EN 10027-1:2016
|
Designation systems for steels - Part 1: Steel names |
EN 10025-6:2004+A1:2009
|
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
ISO 17642-1:2004
|
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 1: General |
EN 10225:2009
|
Weldable structural steels for fixed offshore structures - Technical delivery conditions |
EN ISO 17642-3:2005
|
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
EN 10020:2000
|
Definition and classification of grades of steel |
EN 10297-1:2003
|
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
EN 10061:2003
|
Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
EN 10059:2003
|
Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
EN ISO 17642-2:2005
|
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005) |
EN 10055:1995
|
Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
EN 10249-1:1995
|
Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
EN 10160:1999
|
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
EN 10025-3:2004
|
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
ISO 377:2017
|
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
EN 10067:1996
|
Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass |
ISO 14284:1996
|
Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
EN 10149-3:2013
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels |
ISO 17642-2:2005
|
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests |
CR 10260 : 1998
|
DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |