I.S. EN 12059:2008
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
NATURAL STONE PRODUCTS - DIMENSIONAL STONE WORK - REQUIREMENTS
Hardcopy , PDF
03-01-2012
English
25-04-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Marking, packaging
Annex A (informative) - Sampling
Bibliography
Describes requirements for the following stone units: a) Structural solid stone units: - Load bearing stone elements, typically subject to prevailing compression stresses, such as solid columns, arches and similar; - Solid stone elements used for parapets, handrails, balustrades, copings and the like, intended to withstand horizontal live loadings in addition to any dead load. b) Finishing solid stone units: - Curved cladding panels, for the external finishing of walls, columns or pilasters; - Stone elements for framing one or more side openings in building walls or floors, such as sills, jambs, architraves and similar.
| DevelopmentNote |
2008 Edition Re-Issued in January 2012 & incorporates AMD 1 2011. (01/2012)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| EN 12059:2008+A1:2011 | Identical |
| NEN EN 12059 : 2008 + A1 2012 | Identical |
| NF EN 12059 : 2008 + A1 2012 | Identical |
| BS EN 12059 : 2008 | Identical |
| DIN EN 12059:2012-03 | Identical |
| EN 1468:2012 | Natural stone - Rough slabs - Requirements |
| EN 1469:2015 | Natural stone products - Slabs for cladding - Requirements |
| EN 12058:2015 | Natural stone products - Slabs for floors and stairs - Requirements |
| EN 1936:2006 | Natural stone test methods - Determination of real density and apparent density, and of total and open porosity |
| EN 14066:2013 | Natural stone test methods - Determination of resistance to ageing by thermal shock |
| EN 12326-2:2011 | Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate |
| EN 1342:2012 | Setts of natural stone for external paving - Requirements and test methods |
| EN 13373:2003 | Natural stone test methods - Determination of geometric characteristics on units |
| EN 772-1:2011+A1:2015 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| EN 12371:2010 | Natural stone test methods - Determination of frost resistance |
| EN 771-6:2011+A1:2015 | Specification for masonry units - Part 6: Natural stone masonry units |
| EN 12407:2007 | Natural stone test methods - Petrographic examination |
| EN 12670:2001 | Natural stone - Terminology |
| EN 13755:2008 | Natural stone test methods - Determination of water absorption at atmospheric pressure |
| EN 1926:2006 | Natural stone test methods - Determination of uniaxial compressive strength |
| EN 1341:2012 | Slabs of natural stone for external paving - Requirements and test methods |
| EN 12440:2017 | Natural stone - Denomination criteria |
| EN 1467:2012 | Natural stone - Rough blocks - Requirements |
| EN 13161:2008 | Natural stone test methods - Determination of flexural strength under constant moment |
| EN 1925:1999 | Natural stone test methods - Determination of water absorption coefficient by capillarity |
| EN 12372:2006 | Natural stone test methods - Determination of flexural strength under concentrated load |
| EN 12326-1:2014 | Slate and stone for discontinuous roofing and external cladding - Part 1: Specifications for slate and carbonate slate |
| EN 12057:2015 | Natural stone products - Modular tiles - Requirements |
| EN 1343:2012 | Kerbs of natural stone for external paving - Requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.