• I.S. EN 12111:2014

    Current The latest, up-to-date edition.

    TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2014

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 List of significant hazards
    5 Safety requirements and/or protective measures
    6 Verification of safety requirements and/or
      protective measures
    7 Information for use
    Annex A (normative) - Noise test code
    Annex B (informative) - Figures
    Annex ZA (informative) - Relationship between this European
             Standard and the Essential Requirements
             of EU Directive 2006/42/EC
    Bibliography

    Abstract - (Show below) - (Hide below)

    Specifies all significant hazards, hazardous situations and events relevant to road headers and continuous miners as defined in Clause 3 (hereinafter called machines) when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 3449:2005 Earth-moving machinery Falling-object protective structures Laboratory tests and performance requirements
    ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
    EN 618:2002+A1:2010
    ISO 10532:1995 Earth-moving machinery Machine-mounted retrieval device Performance requirements
    EN ISO 11204 : 2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
    ISO 4871:1996 Acoustics Declaration and verification of noise emission values of machinery and equipment
    EN 620:2002+A1:2010
    ISO 14122-3:2016 Safety of machinery Permanent means of access to machinery Part 3: Stairs, stepladders and guard-rails
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    ISO 14122-1:2016 Safety of machinery Permanent means of access to machinery Part 1: Choice of fixed means and general requirements of access
    EN 1710:2005+A1:2008/AC:2010 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
    EN 981:1996+A1:2008 SAFETY OF MACHINERY - SYSTEM OF AUDITORY AND VISUAL DANGER AND INFORMATION SIGNALS
    ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
    ISO 15817:2012 Earth-moving machinery Safety requirements for remote operator control systems
    ISO 7096:2000 Earth-moving machinery Laboratory evaluation of operator seat vibration
    ISO 3864-2:2016 Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels
    ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
    EN ISO 3449 : 2008 EARTH-MOVING MACHINERY - FALLING-OBJECT PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    EN ISO 3411 : 2007 EARTH-MOVING MACHINERY - PHYSICAL DIMENSIONS OF OPERATORS AND MINIMUM OPERATOR SPACE ENVELOPE
    ISO 12922:2012 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
    EN ISO 3457 : 2008 EARTH-MOVING MACHINERY - GUARDS - DEFINITIONS AND REQUIREMENTS (ISO 3457:2003)
    ISO 13732-1:2006 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces
    ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
    EN 61439-1 : 2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    ISO 12508:1994 Earth-moving machinery Operator station and maintenance areas Bluntness of edges
    EN 1679-1:1998+A1:2011 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
    ISO 8178-1:2017 Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions
    IEC 60439-2:2000+AMD1:2005 CSV Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)
    EN 13478:2001+A1:2008 SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    EN ISO 12922 : 2012 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012)
    ISO 3747:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment
    EN ISO 13850 : 2015 SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)
    IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
    ISO 12100:2010 Safety of machinery General principles for design Risk assessment and risk reduction
    ISO 14122-4:2016 Safety of machinery Permanent means of access to machinery Part 4: Fixed ladders
    EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
    ISO 15380:2016 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
    ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry Determination of burning behaviour of interior materials
    EN ISO 13732-1 : 2008 ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES (ISO 13732-1:2006)
    EN ISO 11201 : 2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
    EN 16228-2 : 2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 2: MOBILE DRILL RIGS FOR CIVIL AND GEOTECHNICAL ENGINEERING, QUARRYING AND MINING
    ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
    EN 60439-4 : 2004 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR CONSTRUCTION SITES (ACS)
    EN 16228-1 : 2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
    EN 474-5:2006+A3:2013 EARTH-MOVING MACHINERY - SAFETY - PART 5: REQUIREMENTS FOR HYDRAULIC EXCAVATORS
    EN ISO 14122-3 : 2016 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS (ISO 14122-3:2016)
    EN ISO 3747 : 2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
    EN ISO 3746 : 2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE (ISO 3746:2010)
    ISO 5006:2017 Earth-moving machinery Operator's field of view Test method and performance criteria
    EN 3-7:2004+A1:2007 PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    EN ISO 3744 : 2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
    EN 953 : 1997 + A1 2009 SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
    IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
    EN ISO 4414 : 2010 PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS (ISO 4414:2010)
    EN ISO 14122-4 : 2016 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 4: FIXED LADDERS (ISO 14122-4:2016)
    ISO 6405-1:2017 Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols
    EN ISO 14122-2 : 2016 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 2: WORKING PLATFORMS AND WALKWAYS (ISO 14122-2:2016)
    ISO 3457:2003 Earth-moving machinery Guards Definitions and requirements
    EN ISO 12100 : 2010 SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
    ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
    EN 60204-11:2000/corrigendum:2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
    IEC 60076-2:2011 Power transformers - Part 2: Temperature rise for liquid-immersed transformers
    ISO 8178-4:2017 Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications
    EN ISO 13849-1 : 2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
    ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
    ISO 3864-3:2012 Graphical symbols Safety colours and safety signs Part 3: Design principles for graphical symbols for use in safety signs
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    EN ISO 4871 : 2009 ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT (ISO 4871:1996)
    IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    EN ISO 4413 : 2010 HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
    ISO 14122-2:2016 Safety of machinery Permanent means of access to machinery Part 2: Working platforms and walkways
    EN 60076-2 : 2011 POWER TRANSFORMERS - PART 2: TEMPERATURE RISE FOR LIQUID-IMMERSED TRANSFORMERS
    EN ISO 11688-1 : 2009 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING (ISO/TR 11688-1:1995)
    EN ISO 14122-1 : 2016 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 1: CHOICE OF FIXED MEANS AND GENERAL REQUIREMENTS OF ACCESS (ISO 14122-1:2016)
    ISO 13849-1:2015 Safety of machinery Safety-related parts of control systems Part 1: General principles for design
    EN 61310-1:2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
    EN ISO 11202 : 2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
    IEC 60439-4:2004 Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
    ISO 6805:1994 Rubber hoses and hose assemblies for underground mining Wire-reinforced hydraulic types for coal mining Specification
    ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
    EN 60439-2:2000/A1:2005 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS)
    EN ISO 7096:2008/AC:2009 EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
    1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    EN 894-1:1997+A1:2008 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective