Skip to content
Please enter a keyword to search
  • Preview

    I.S. EN 12273:2008

    Current The latest, up-to-date edition.

    SLURRY SURFACING - REQUIREMENTS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2008

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Symbols
    5 Requirements
      5.1 Constituent materials
          5.1.1 General
          5.1.2 Binders
          5.1.3 Aggregates
          5.1.4 Grading curves
      5.2 Slurry surfacing
          5.2.1 Defects as determined by visual assessment
          5.2.2 Skid resistance
          5.2.3 Characterising noise generation (other
                characteristics)
      5.3 Durability
          5.3.1 General
          5.3.2 Skid resistance
          5.3.3 Bond
    6 Evaluation of conformity
    Annex A (normative) Factory Production Control (FPC)
          A.1 General
          A.2 General requirements
          A.3 Product specific requirements
    Annex B (normative) Minimum test frequencies for Factory Production
            Control (FPC)
    Annex C (normative) Type Approval Installation Trial (TAIT)
          C.1 General
          C.2 Requirements
          C.3 Records
          C.4 Information availability
    Annex ZA (informative) Clauses of this European Standard addressing
             the provisions of the EU Construction Product Directive
          ZA.1 Scope and relevant characteristics
          ZA.2 Procedure for attestation of conformity of slurry
               surfacing
          ZA.3 CE marking and labelling
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines the performance requirements and control procedures for the installation of slurry surfacing as a product for the surface treatment of roads and other trafficked areas (e.g. footways, cycleways).

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    S.R. 62:2018 GUIDANCE ON THE USE OF I.S. EN 12273:2008 SLURRY SURFACING - REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 14895:2006 Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders
    EN 13075-1:2016 Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method
    ISO 13473-1:1997 Characterization of pavement texture by use of surface profiles Part 1: Determination of Mean Profile Depth
    EN 14769:2012 Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
    EN 13589:2008 Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
    EN 1425:2012 Bitumen and bituminous binders - Characterization of perceptible properties
    EN ISO 11819-1:2001 Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:1997)
    ISO 11819-1:1997 Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method
    EN 1429:2013 Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving
    EN 1097-8:2009 Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value
    EN 12274-7 : 2005 Slurry surfacing - Test methods - Part 7: Shaking abrasion test
    EN 12274-8:2005 Slurry surfacing - Test methods - Part 8: Visual assessment of defects
    EN 13808:2013 Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions
    EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
    EN 1428:2012 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method
    EN 13043:2002/AC:2004 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
    EN 1097-5:2008 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
    EN 933-6:2014 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
    EN 933-9:2009+A1:2013 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test
    EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
    EN 13588:2017 Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test
    EN 12847:2009 Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions
    EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
    EN 58:2012 Bitumen and bituminous binders - Sampling bituminous binders
    EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
    EN 933-8:2012+A1:2015 Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
    EN ISO 13473-1 : 2004 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH
    EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
    ISO 9001:2015 Quality management systems — Requirements
    EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
    EN 13075-2:2016 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
    EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
    EN 12846:2002 Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer
    EN 13074:2002 Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation
    EN 933-5:1998/A1:2004 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF PERCENTAGE OF CRUSHED AND BROKEN SURFACES IN COARSE AGGREGATE PARTICLES
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective