I.S. EN 12790:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CHILD USE AND CARE ARTICLES - RECLINED CRADLES
Hardcopy , PDF
09-03-2023
English
01-01-2009
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Properties of materials
4.1 Chemical properties
4.2 Flammability
5 Construction
5.1 Shrinkage
5.2 Finger entrapment
5.3 Moving parts
5.4 Edges, points and corners
5.5 Small parts
5.6 Cords, ribbons and parts used as ties
5.7 Springs
5.8 Locking mechanism(s) for folding system
5.8.1 General
5.8.2 Incomplete deployment
5.8.3 Unintentional release of locking mechanism(s)
5.9 Reclining system
5.10 Angle and height of seat unit
5.11 Locking mechanism(s) for carrying handle(s)
5.11.1 General
5.11.2 Locking mechanism(s)
5.11.3 Incomplete deployment of the carrying handle(s)
5.12 Stability
5.13 Static strength
5.14 Durability of reclined cradles with carrying handle(s)
5.15 Strength of carrying handle(s) locking mechanism(s)
5.16 Slippage of the reclined cradle
5.17 Restraint system
5.17.1 General
5.17.2 Strength of the restraint system
5.17.3 Slippage of the restraint system
5.18 Marking
6 Test methods
6.1 General
6.2 Test equipment
6.2.1 Test mass A
6.2.2 Test mass B
6.2.3 Small parts cylinder
6.2.4 Feeler gauge
6.2.5 Test equipment for handle strength test
6.2.6 Test probes for finger entrapment
6.2.7 Test equipment for handle locking mechanism
strength test
6.2.8 Test surface for the stability test
6.2.9 Measurement device for the alpha angle
6.3 Test method for finger entrapment
6.4 Test method for small parts
6.4.1 Assessment of child's ability to grip components
6.4.2 Torque test
6.4.3 Tensile test
6.5 Test method for springs
6.6 Test method for locking mechanisms
6.6.1 Test method for incomplete deployment
6.6.2 Test method for unintentional release of locking
mechanisms
6.6.3 Test method for the durability of the locking
mechanisms
6.7 Test method for the reclining system
6.8 Test method for the measurement of angles and height
of seat unit
6.8.1 General
6.8.2 Test method for the measurement of angles
6.8.3 Test method for the measurement of height H
6.9 Reclined cradle tipping resistance test
6.10 Reclined cradle tipping resistance test from the floor
6.11 Test method for stability
6.12 Test method for static strength
6.13 Test method for durability of reclined cradles with
carrying handle(s)
6.14 Handle locking mechanism(s) strength test
6.15 Test method for slippage of the reclined cradle
6.16 Test method for the strength of the restraint system
6.17 Test method for the slippage of the restraint system
6.18 Durability of marking
7 Product information
7.1 General
7.2 Marking of the product
7.3 Purchase information
7.4 Instructions for use
8 Non-permeable packaging
Annex A (informative) A-deviations
Annex B (informative) Relevant standards and recommendations for
multi purpose reclined cradles
Describes safety requirements and the corresponding test methods for fixed or folding reclined cradles intended for children up to a weight of 9 kg or who are unable to sit up unaided.
DocumentType |
Standard
|
Pages |
35
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ONORM EN 12790 : 2009 | Identical |
UNE-EN 12790:2010 | Identical |
DIN EN 12790:2009-07 | Identical |
SN EN 12790 : 2009 | Identical |
EN 12790:2009 | Identical |
NBN EN 12790 : 2009 | Identical |
UNI EN 12790 : 2009 | Identical |
NS EN 12790 : 2009 | Identical |
BS EN 12790:2009 | Identical |
NEN EN 12790 : 2009 | Identical |
NF EN 12790 : 2009 | Identical |
ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
EN 1103:2005 | Textiles - Fabrics for apparel - Detailed procedure to determine the burning behaviour |
EN 71-1:2014 | Safety of toys - Part 1: Mechanical and physical properties |
ISO 7619-2:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method |
EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.