I.S. EN 13162:2012
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
Hardcopy , PDF
07-03-2015
English
11-12-2012
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and abbreviated
terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the Constancy of
Performance (AVCP)
8 Marking and labelling
Annex A (normative) - Determination of the declared values
of thermal resistance and thermal conductivity .
Annex B (normative) - Product type determination (PTD)
and factory production control (FPC)
Annex C (normative) - MW multi-layered insulation products
Annex D (informative) - Examples for the determination of
the declared values of thermal resistance and thermal
conductivity for a product or a product group
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Regulation
Bibliography
Describes the requirements for factory made mineral wool products, with or without facings or coatings, which are used for the thermal insulation of buildings.
| DevelopmentNote |
2012 Edition Re-Issued in March 2015 & incorporates AMD 1 2015. (03/2015) Supersedes I.S. 260. (08/2016)
|
| DocumentType |
Standard
|
| Pages |
50
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| DIN EN 13162:2015-04 | Identical |
| NEN EN 13162 : 2012 + A1 2015 | Identical |
| EN 13162:2012+A1:2015 | Identical |
| BS EN 13162 : 2012 | Identical |
| SN EN 13162 : 2012 + A1 2015 | Identical |
| NBN EN 13162 : 2013 + A1 2015 | Identical |
| NS EN 13162 : 2001 | Identical |
| UNI EN 13162 : 2013 | Identical |
| NF EN 13162 : 2013 + A1 2015 | Identical |
| UNE-EN 13162:2013 | Identical |
| S.R. 325:2013+A2:2018/AC:2019 | RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES IN IRELAND TO EUROCODE 6 |
| ISO 9229:2007 | Thermal insulation Vocabulary |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| EN 1607:2013 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| EN 13820:2003 | Thermal insulating materials for building applications - Determination of organic content |
| EN 1606:2013 | Thermal insulating products for building applications - Determination of compressive creep |
| EN 1608:2013 | Thermal insulating products for building applications - Determination of tensile strength parallel to faces |
| EN 29052-1:1992 | Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings |
| EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN ISO 9229:2007 | Thermal insulation - Vocabulary (ISO 9229:2007) |
| EN 824:2013 | Thermal insulating products for building applications - Determination of squareness |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 825:2013 | Thermal insulating products for building applications - Determination of flatness |
| ISO 9053:1991 | Acoustics Materials for acoustical applications Determination of airflow resistance |
| EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
| EN 12431:2013 | Thermal insulating products for building applications - Determination of thickness for floating floor insulating products |
| EN ISO 13790:2008 | Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008) |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 12087:2013 | Thermal insulating products for building applications - Determination of long term water absorption by immersion |
| EN 29053:1993 | Acoustics - Materials for acoustical applications - Determination of airflow resistance (ISO 9053:1991) |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| EN 12090:2013 | Thermal insulating products for building applications - Determination of shear behaviour |
| ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| EN 1604:2013 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| EN 12430:2013 | Thermal insulating products for building applications - Determination of behaviour under point load |
| EN 1609:2013 | Thermal insulating products for building applications - Determination of short term water absorption by partial immersion |
| ISO 13790:2008 | Energy performance of buildings Calculation of energy use for space heating and cooling |
| ISO 9052-1:1989 | Acoustics — Determination of dynamic stiffness — Part 1: Materials used under floating floors in dwellings |
| EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
| EN 15715:2009 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
| EN 14064-2:2010 | Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products |
| EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
| EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
| EN 14303:2015 | Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
| EN 822:2013 | Thermal insulating products for building applications - Determination of length and width |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.