I.S. EN 13165:2012
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION
Hardcopy , PDF
13-05-2021
English
11-12-2012
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and abbreviated terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the Constancy of Performance (AVCP)
8 Marking and labelling
Annex A (normative) - Determination of the declared values of
thermal resistance and thermal conductivity
Annex B (normative) - Product type determination PTD and factory
production control (FPC)
Annex C (normative) - Determination of the aged values
of thermal resistance and thermal conductivity
Annex D (normative) - PU multi-layered insulation products
Annex E (informative) - Additional properties
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the
EU Construction Products Regulation'
Bibliography
Defines the requirements for factory made rigid polyurethane foam (PU) products, with or without facings or coatings, which are used for the thermal insulation of buildings.
| DevelopmentNote |
2012 Edition Re-Issued in June 2016 & incorporates AMD 2 2016. (07/2016)
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| SN EN 13165 : 2012 + A2 2016 | Identical |
| EN 13165:2012+A2:2016 | Identical |
| NBN EN 13165 : 2013 + A2 2016 | Identical |
| NEN EN 13165 : 2012 + A2 2016 | Identical |
| UNI EN 13165 : 2013 | Identical |
| DIN EN 13165:2016-09 | Identical |
| NF EN 13165 : 2012 + A2 2016 | Identical |
| NS EN 13165 : 2012 + A1 2015 | Identical |
| BS EN 13165 : 2012 | Identical |
| UNE-EN 13165:2013 | Identical |
| S.R. 325:2013+A2:2018/AC:2019 | RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES IN IRELAND TO EUROCODE 6 |
| ISO 9229:2007 | Thermal insulation Vocabulary |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| EN 1607:2013 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| EN 13820:2003 | Thermal insulating materials for building applications - Determination of organic content |
| EN 1606:2013 | Thermal insulating products for building applications - Determination of compressive creep |
| EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN ISO 9229:2007 | Thermal insulation - Vocabulary (ISO 9229:2007) |
| EN ISO 4590:2016 | Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016) |
| EN 1605:2013 | Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions |
| EN 824:2013 | Thermal insulating products for building applications - Determination of squareness |
| ISO 4590:2016 | Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells |
| EN 12088:2013 | Thermal insulating products for building applications - Determination of long term water absorption by diffusion |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 825:2013 | Thermal insulating products for building applications - Determination of flatness |
| EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
| EN 14308:2015 | Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 1602:2013 | Thermal insulating products for building applications - Determination of the apparent density |
| EN 12087:2013 | Thermal insulating products for building applications - Determination of long term water absorption by immersion |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| EN 12090:2013 | Thermal insulating products for building applications - Determination of shear behaviour |
| ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| EN 1604:2013 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN 12091:2013 | Thermal insulating products for building applications - Determination of freeze-thaw resistance |
| EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| EN 1609:2013 | Thermal insulating products for building applications - Determination of short term water absorption by partial immersion |
| EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
| EN 15715:2009 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
| EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
| EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
| EN 822:2013 | Thermal insulating products for building applications - Determination of length and width |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.