I.S. EN 13336:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LEATHER - UPHOLSTERY LEATHER CHARACTERISTICS - GUIDE FOR SELECTION OF LEATHER FOR FURNITURE
Hardcopy , PDF
04-03-2023
English
01-01-2012
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General principles
5 Sampling
6 Conditioning and sampling preparation
7 Fundamental and complementary
characteristics, test methods and
recommended values
Covers guidelines for the test methods and recommended values for upholstery leather for furniture.
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 13336 : 2012 | Identical |
| NS EN 13336 : 2012 | Identical |
| NBN EN 13336 : 2012 | Identical |
| UNE-EN 13336:2013 | Identical |
| DIN EN 13336:2012-12 | Identical |
| SN EN 13336 : 2012 | Identical |
| EN 13336:2012 | Identical |
| UNI EN 13336 : 2012 | Identical |
| NF EN 13336 : 2012 | Identical |
| BS EN 13336:2012 | Identical |
| NEN EN 13336 : 2012 | Identical |
| EN ISO 3377-1:2011 | Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011) |
| ISO 4045:2008 | Leather Chemical tests Determination of pH |
| ISO 11644:2009 | Leather — Test for adhesion of finish |
| EN ISO 4044:2017 | Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2017) |
| EN 1021-1:2014 | Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette |
| ISO 17233:2017 | Leather — Physical and mechanical tests — Determination of cold crack temperature of surface coatings |
| EN 15987:2015 | Leather - Terminology - Key definitions for the leather trade |
| ISO 5402-1:2017 | Leather Determination of flex resistance Part 1: Flexometer method |
| ISO 2418:2017 | Leather — Chemical, physical and mechanical and fastness tests — Sampling location |
| EN ISO 4045:2008 | Leather - Chemical tests - Determination of pH (ISO 4045:2008) |
| EN ISO 15700:1999 | Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998) |
| EN ISO 2418:2017 | Leather - Chemical, physical and mechanical and fastness test - Sampling location (ISO 2418:2017) |
| EN ISO 11640:2012 | Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012) |
| ISO 4044:2017 | Leather — Chemical tests — Preparation of chemical test samples |
| ISO 11640:2012 | Leather Tests for colour fastness Colour fastness to cycles of to-and-fro rubbing |
| EN ISO 11644:2009 | Leather - Test for adhesion of finish (ISO 11644:2009) |
| EN ISO 2419:2012 | Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2012) |
| ISO 11641:2012 | Leather — Tests for colour fastness — Colour fastness to perspiration |
| EN ISO 11641:2012 | Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012) |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| EN ISO 17233:2017 | Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2017) |
| ISO 2419:2012 | Leather — Physical and mechanical tests — Sample preparation and conditioning |
| ISO 15700:1998 | Leather — Tests for colour fastness — Colour fastness to water spotting |
| EN ISO 5402-1:2017 | Leather - Determination of flex resistance - Part 1: Flexometer method (ISO 5402-1:2017) |
| EN 1021-2:2014 | Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
| ISO 3377-1:2011 | Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.