EN 326-3:2003
|
Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
|
EN 717-2:1994/AC:2002
|
WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD
|
EN 635-2:1995
|
Plywood - Classification by surface appearance - Part 2: Hardwood
|
EN 13017-1:2000
|
Solid wood panels - Classification by surface appearance - Part 1: Softwood
|
EN 335-2:2006
|
Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood
|
EN 13986:2004
|
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
|
EN 310:1993
|
Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
|
EN 326-1:1994
|
Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
|
EN 322:1993
|
Wood-based panels - Determination of moisture content
|
EN 326-2:2010+A1:2014
|
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
|
EN 12369-3:2008
|
Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels
|
EN 596:1995
|
Timber structures - Test methods - Soft body impact test of timber framed walls
|
EN 324-1:1993
|
Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length
|
ENV 1156:1998
|
Wood-based panels - Determination of duration of load and creep factors
|
EN 1058:2009
|
Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values
|
EN 15416-3:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
|
EN 1195:1997
|
Timber structures - Test methods - Performance of structural floor decking
|
EN 13446:2002
|
Wood-based panels - Determination of withdrawal capacity of fasteners
|
EN 301:2017
|
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
|
EN 789:2004
|
Timber structures - Test methods - Determination of mechanical properties of wood based panels
|
EN 13556:2003
|
Round and sawn timber - Nomenclature of timbers used in Europe
|
EN 635-1:1994
|
Plywood - Classification by surface appearance - Part 1: General
|
EN 594:2011
|
Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
|
EN 324-2:1993
|
Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness
|
EN 323:1993
|
Wood-based panels - Determination of density
|
EN 13183-2:2002/AC:2003
|
MOISTURE CONTENT OF A PIECE OF SAWN TIMBER - ESTIMATION BY ELECTRICAL RESISTANCE METHOD
|
EN 13017-2:2000
|
Solid wood panels - Classification by surface appearance - Part 2: Hardwood
|
EN 320:2011
|
Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws
|
EN 315:2000
|
Plywood - Tolerances for dimensions
|
EN 318:2002
|
Wood based panels - Determination of dimensional changes associated with changes in relative humidity
|
EN 13354:2008
|
Solid wood panels (SWP) - Bonding quality - Test method
|
EN 460:1994
|
Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes
|
EN 1995-1-1:2004/A2:2014
|
EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
|
EN 12871:2013
|
Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
|
EN 635-3:1995
|
Plywood - Classification by surface appearance - Part 3: Softwood
|
CEN/TS 635-4:2007
|
Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline
|
DIN 53255:1964-06
|
TESTING OF WOOD ADHESIVES AND GLUED WOOD JOINTS - MECHANICAL DELAMINATION TESTS BY GROOVING AND CHOPPING
|
EN 12775:2001
|
Solid wood panels - Classification and terminology
|