I.S. EN 13374:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
Hardcopy , PDF
27-01-2020
20-05-2013
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of edge protection systems
5 Requirements
6 Structural design
7 Test methods
8 Designation
9 Marking
10 Information to be given to the site
11 Assessment
Annex A (informative) - Appropriate classes for the use at different inclinations and falling heights
Bibliography
Describes the requirements and test methods for temporary edge protection systems for use during construction or maintenance of buildings and other structures.
Committee |
CEN/TC 53
|
DocumentType |
Test Method
|
Pages |
36
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ONORM EN 13374 : 2013 | Identical |
EN 13374:2013 | Identical |
NS EN 13374 : 2013 | Identical |
BS EN 13374 : 2013 | Identical |
SN EN 13374 : 2013 | Identical |
NF EN 13374 : 2013 | Identical |
UNE-EN 13374:2013 | Identical |
UNI EN 13374 : 2013 | Identical |
NBN EN 13374 : 2013 | Identical |
NEN EN 13374 : 2013 | Identical |
DIN EN 13374:2013-07 | Identical |
EN 12811-1:2003 | Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design |
EN 1993-6:2007/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES |
EN 1004:2004 | Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements |
EN 1995-2:2004 | Eurocode 5: Design of timber structures - Part 2: Bridges |
EN 1993-4-1:2007/A1:2017 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS |
EN 12811-2:2004 | Temporary works equipment - Part 2: Information on materials |
EN 1993-4-2:2007 | Eurocode 3 - Design of steel structures - Part 4-2: Tanks |
EN 1993-1-5:2006 | Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements |
EN 12811-3:2002 | Temporary works equipment - Part 3: Load testing |
EN 1993-1-5:2006/A1:2017 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS |
EN 596:1995 | Timber structures - Test methods - Soft body impact test of timber framed walls |
EN 1999-1-1:2007/A2:2013 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
EN 1999-1-4:2007/A1:2011 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
EN 1995-1-1:2004 (edition 2) | Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings |
EN 1999-1-5:2007/AC:2009 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
EN 1993-4-3:2007/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES |
EN 1263-1:2014 | Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods |
EN 1993-1-4:2006/A1:2015 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
EN 1263-2:2014 | Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits |
EN 1995-1-2:2004/AC:2009 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN |
EN 1993-5:2007/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING |
EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
EN 338:2003 | Structural timber - Strength classes |
EN 74-3:2007 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures |
EN 1993-4-1:2007 | Eurocode 3 - Design of steel structures - Part 4-1: Silos |
EN 1993-1-1:2005 | Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings |
EN 1993-1-4:2006 | Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels |
EN 1993-3-2 : 2006 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-2: TOWERS, MASTS AND CHIMNEYS - CHIMNEYS |
EN 1263-2:2002 | Safety nets - Part 2: Safety requirements for the positioning limits |
EN 338:2016 | Structural timber - Strength classes |
EN 1993-3-1:2006/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-1: TOWERS, MASTS AND CHIMNEYS - TOWERS AND MASTS |
EN 1993-1-3:2006/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures |
EN 1993-4-2:2007/A1:2017 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS |
EN 1993-1-9:2005/AC:2009 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-9: FATIGUE |
EN 1995-1-1:2004/A2:2014 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
EN 1999-1-2:2007/AC:2009 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
EN 1993-1-2:2005/AC:2009 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 1990:2002/A1:2005/AC:2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
EN 1991-1-4:2005/A1:2010 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
EN 1993-1-8:2005/AC:2009 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
EN 1993-1-7:2007/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING |
EN 1993-1-12:2007/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-12: ADDITIONAL RULES FOR THE EXTENSION OF EN 1993 UP TO STEEL GRADES S 700 |
EN 1993-2:2006/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 2: STEEL BRIDGES |
EN 1993-1-10:2005/AC:2009 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES |
EN 1999-1-3:2007/A1:2011 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE |
EN 1993-1-11:2006/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
EN 1993-1-1:2005/A1:2014 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
EN 1263-1:2002 | Safety nets - Part 1: Safety requirements, test methods |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.