I.S. EN 13411-3:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING
Hardcopy , PDF
18-12-2008
English
18-08-2004
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 List of hazards
5 Safety requirements and/or measures
5.1 Ferrule-secured system
5.1.1 General
5.1.2 Type testing
5.1.3 Instructions to be provided by the
ferrule-secured system designer
5.2 Ferrules
5.2.1 Material
5.2.2 Dimensions
5.2.3 Manufacture and quality control of ferrule
5.2.4 Certificate
5.2.5 Marking
5.3 Ferrule-securing
5.3.1 General
5.3.2 Matching of ferrule to wire rope
5.3.3 Forming the eye
5.3.4 Pressing the ferrule
5.3.5 Quality control after pressing of the ferrule
6 Verification of the safety requirements and/or measures
6.1 Qualification of personnel
6.2 Tensile type test (FSET system designer)
6.3 Fatigue type test (FSET system designer)
6.4 Fatigue type test of Flemish eye ferrule-secured
termination of crane hoist rope (FSET system
designer)
6.5 Ferrule dimensions before pressing (Ferrule
manufacturer)
6.6 Manufacture and quality control of ferrule (Ferrule
manufacturer)
6.7 Ferrules (FSET or ferrule-secured endless loop
manufacturer)
6.8 Matching of ferrule to wire rope (FSET or
ferrule-secured endless loop manufacturer)
6.9 Forming the eye (FSET or ferrule-secured endless
loop manufacturer)
6.10 Pressing the ferrule (FSET or ferrule-secured endless
loop manufacturer)
6.11 Quality control after pressing the ferrule(s) (FSET or
ferrule-secured endless loop manufacturer)
7 Information for use
7.1 Marking
7.2 Certificate
Annex A (informative) Specification for one design of
turn-back eye ferrule-secured
termination
A.1 General
A.2 Types of terminations
A.3 Ropes for this design of ferrule
A.3.1 General
A.3.2 Rope types
A.3.3 Metallic cross sectional area factor
A.3.4 Rope grade
A.3.5 Types of rope lay
A.4 Tubing
A.4.1 General
A.4.2 Material
A.4.3 Straightness
A.4.4 Wall thickness
A.5 Identification and dimensions of ferrules
(unpressed)
A.6 Matching wire rope to ferrule
A.7 Making the eye termination
A.7.1 Positioning of ferrule (Types A and B)
A.7.2 Pressing the ferrule
A.7.3 Ferrules after pressing
A.8 Information for use
A.8.1 Identification marks
A.8.2 Temperature limits
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Relates with the requirements for the ferrule-securing of eyes and endless loops.
| DevelopmentNote |
2004 Edition Re-Issued in December 2008 & incorporates AMD 1 2008. (01/2009)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN 13411-3 : 2011 | Identical |
| UNE-EN 13411-3:2005 | Identical |
| BS EN 13411-3 : 2004 | Identical |
| NF EN 13411-3 : 2004 + A1 2008 | Identical |
| NBN EN 13411-3 : 2004 + A1 2009 | Identical |
| EN 13411-3:2004+A1:2008 | Identical |
| SN EN 13411-3 : 2004 + A1 2009 | Identical |
| NEN EN 13411-3 : 2004 + A1 2008 | Identical |
| NS EN 13411-3 : 2004 + A1 2008 | Identical |
| DIN EN 13411-3:2011-04 | Identical |
| EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
| EN 12385-4:2002+A1:2008 | Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications |
| EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN 12385-10:2003+A1:2008 | Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications |
| EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN 13414-1:2003+A2:2008 | Steel wire rope slings - Safety - Part 1: Slings for general lifting service |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.