I.S. EN 13445-5:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING
Hardcopy , PDF
23-05-2019
English
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Performance of inspection and testing
5 Technical documentation
6 Inspection and testing during fabrication
7 Subcontracted items
8 Miscellaneous tests
9 Calibration
10 Final assessment
11 Marking and declaration of compliance with the standard
12 Documents
Annex A (normative) Inspection and testing of serially produced pressure vessels
Annex B (normative) Detailed dimensional requirements for pressure vessels
Annex C (normative) Access and inspection openings, closing mechanisms and special locking elements
Annex D (informative) Leak Testing
Annex E (informative) Acoustic emission
Annex F (normative) Inspection and testing of pressure vessels or parts subject to creep
Annex G (normative) Inspection and testing of pressure vessels subject to cyclic loads
Annex H (informative) Declaration of compliance with this standard
Annex I (informative) Specific tests during construction to assist in-service inspection
Annex Y (informative) History of EN 13445-5
Annex ZA (informative) Relationship between this European Standard and the essential requirements of Directive 2014/68/EU aimed to be covered
Bibliography
Defines the inspection and testing of individual and serially produced pressure vessels made of steels in accordance with EN 13445-2:2014.
| Committee |
TC 54
|
| DevelopmentNote |
ISSUE 3 dated 19.08.2016 issued incorporating latest Correction Notice issued by CEN dated 03.08.2016. (09/2016)
|
| DocumentType |
Standard
|
| Pages |
86
|
| ProductNote |
The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document. THIS STANDARD ALSO REFERS TO EN 13445-1:2014,EN ISO 17635:2010,EN ISO 17662,EN 1330-9,
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 13445-5 : 2014 AC 2 2016 | Identical |
| DIN EN 13445-5:2015-12 | Identical |
| NBN EN 13445-5 : 2014 | Identical |
| ONORM EN 13445-5 : 2015 | Identical |
| BS EN 13445-5 : 2014 | Identical |
| UNI EN 13445-5 : 2015 | Identical |
| UNE-EN 13445-5:2015 | Identical |
| SN EN 13445-5 : 2014 | Identical |
| NEN EN 13445-5 : 2016 | Identical |
| NS EN 13445-5 : 2014 | Identical |
| EN 13445-5:2014 | Identical |
| EN 13445-5 : 2014 COR 2017 | Identical |
| DIN EN 13445-5:2002-08 | Identical |
| I.S. 328:2015/AC1:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
| I.S. 328:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
| EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
| EN 13554:2011 | Non-destructive testing - Acoustic emission testing - General principles |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 17662:2016 | Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities |
| ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| EN 13477-1:2001 | Non-destructive testing - Acoustic emission - Equipment characterisation - Part 1: Equipment description |
| CEN/TR 764-6:2012 | Pressure equipment - Part 6: Structure and content of operating instructions |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| EN ISO 14732:2013 | Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
| EN 1330-9:2017 | Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing |
| EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
| EN 13477-2:2010 | Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2: Verification of operating characteristic |
| EN 13445-4:2014 | Unfired pressure vessels - Part 4: Fabrication |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| EN 13445-4 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| EN 14584:2013 | Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources |
| EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| EN ISO 17635:2016 | Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
| EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.