I.S. EN 13808:2013
Current
The latest, up-to-date edition.
BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS
Hardcopy , PDF
English
01-01-2013
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Requirements and test methods
6 Assessment and verification of constancy of
performance - AVCP
Annex A (informative) - Examples of abbreviated
terms for bituminous emulsions
Annex B (informative) - Examples of selected
performance classes for a C 69 BP 2 emulsion
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the EU
Construction Products Regulation 305/2011
Bibliography
Describes the requirements for performance characteristics of cationic bituminous emulsion classes which are suitable for use in the construction and maintenance of roads, airfields and other paved areas.
| DevelopmentNote |
Supersedes I.S. EN 14733. (05/2013)
|
| DocumentType |
Standard
|
| Pages |
39
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 13808 : 2013 | Identical |
| NS EN 13808 : 2013 + NA 2016 | Identical |
| NBN EN 13808 : 2013 | Identical |
| DIN EN 13808:2013-07 | Identical |
| EN 13808:2013 | Identical |
| NF EN 13808:2013 | Identical |
| UNE-EN 13808:2013 | Identical |
| NEN EN 13808 : 2013 | Identical |
| SN EN 13808 : 2015 | Identical |
| S.R. 62:2018 | GUIDANCE ON THE USE OF I.S. EN 12273:2008 SLURRY SURFACING - REQUIREMENTS |
| S.R. 61:2018 | GUIDANCE ON THE USE OF I.S. EN 12271:2006 SURFACE DRESSING - REQUIREMENTS |
| EN 13075-1:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| EN 13074-1:2011 | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation |
| EN 14769:2012 | Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) |
| EN 13589:2008 | Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method |
| EN 13587:2016 | Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method |
| EN 1425:2012 | Bitumen and bituminous binders - Characterization of perceptible properties |
| EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| EN 12596:2014 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| EN 12846-1:2011 | Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| EN 13703:2003 | Bitumen and bituminous binders - Determination of deformation energy |
| EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
| EN 12597:2014 | Bitumen and bituminous binders - Terminology |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| EN 16345:2012 | Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer |
| EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
| EN 13588:2017 | Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test |
| EN 12847:2009 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
| EN 58:2012 | Bitumen and bituminous binders - Sampling bituminous binders |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods |
| EN 12849:2009 | Bitumen and bituminous binders - Determination of penetration power of bituminous emulsions |
| EN 12846-2:2011 | Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders |
| EN 12594:2014 | Bitumen and bituminous binders - Preparation of test samples |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12850:2009 | Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions |
| EN 13075-2:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions |
| ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 12593:2015 | Bitumen and bituminous binders - Determination of the Fraass breaking point |
| EN 13074-2:2011 | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
| EN 1430:2009 | Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions |
| EN ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004) |
| EN 12848:2009 | Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions |
| EN 13614:2011 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| EN 12595:2014 | Bitumen and bituminous binders - Determination of kinematic viscosity |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.