I.S. EN 1402-6:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
UNSHAPED REFRACTORY PRODUCTS - PART 6: MEASUREMENT OF PHYSICAL PROPERTIES
Hardcopy , PDF
29-01-2013
English
01-01-2003
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Determination of geometric bulk density
3.1 Principle
3.2 Test pieces
3.3 Apparatus
3.4 Procedure
3.4.1 Determination of the mass m of the test piece
3.4.2 Determination of the volume, V, of the test piece
3.4.3 Calculation of geometric bulk density, rho[g]
3.5 Calculation and expression of test results
4 Determination of density and porosity
4.1 Principle
4.2 Test pieces
4.3 Procedure
4.3.1 Determination of bulk density
4.3.2 Determination of true density
4.4 Calculation
5 Determination of cold modulus of rupture
5.1 Principle
5.2 Test pieces
5.3 Apparatus and procedure
5.4 Test results
6 Determination of cold crushing strength
6.1 Principle
6.2 Test pieces
6.2.1 General
6.2.2 Prismatic test pieces
6.2.3 Cubic test pieces
6.2.4 Cylindrical test pieces (for basic dense castables
and basic ramming materials only)
6.3 Apparatus
6.4 Procedure
6.4.1 Dense materials
6.4.2 Insulating materials
6.5 Calculation and expression of results
7 Determination of permanent linear change
7.1 Principle
7.2 Apparatus
7.3 Procedure
7.3.1 Linear change on drying
7.3.2 Linear change on firing
7.3.3 Total linear change
7.4 Calculation
7.4.1 Linear change on drying
7.4.2 Linear change on firing
7.4.3 Total linear change
8 Determination of modulus of rupture at elevated temperatures
8.1 Principle
8.2 Apparatus and procedure
8.3 Calculation and expression of results
9 Determination of refractoriness under load and creep in
compression
9.1 Principle
9.2 Test pieces
9.3 Procedure
9.4 Calculation and expression of test results
10 Test report
Bibliography
Covers methods for the determination of properties of unshaped materials from test pieces prepared and stored according to EN 1402-5.
| DevelopmentNote |
Supersedes I.S. ENV 1402-6 (12/2003)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN 1402-6 : 2003 | Identical |
| NS EN 1402-6 : 1ED 2003 | Identical |
| EN 1402-6:2003 | Identical |
| UNE-EN 1402-6:2004 | Identical |
| NBN EN 1402-6 : 2003 | Identical |
| UNI EN 1402-6 : 2004 | Identical |
| SN EN 1402-6 : 2003 | Identical |
| NF EN 1402-6 : 2004 | Identical |
| BS EN 1402-6:2003 | Identical |
| DIN EN 1402-6:2004-01 | Identical |
| EN 993-9:1997 | Methods of testing dense shaped refractory products - Part 9: Determination of creep in compression |
| EN 1402-5:2003 | Unshaped refractory products - Part 5: Preparation and treatment of test pieces |
| EN 993-7:1998 | Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures |
| EN 1094-5 : 1995 | INSULATING REFRACTORY PRODUCTS - PART 5: DETERMINATION OF COLD CRUSHING STRENGTH |
| EN 993-5:1998 | Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength |
| EN 993-8 : 1997 | METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS - PART 8: DETERMINATION OF REFRACTORINESS-UNDER-LOAD |
| EN 1402-1:2003 | Unshaped refractory products - Part 1: Introduction and classification |
| EN 1094-4:1995 | Insulating refractory products - Part 4: Determination of bulk density and true porosity |
| EN 1094-6:1998 | Insulating refractory products - Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987 modified) |
| EN 993-6:1995 | Methods of test for dense shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperature |
| EN 993-1:1995 | Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.